The soles of the shoes are always creaking, what should I do if the soles are ringing?

Sprinkle some powder in your shoes. Sometimes, the squeak can be caused by the friction between the insole and the sole. Talcum powder.

talcum flour or cornstarch.

can absorb and reduce the noise generated by friction.

If the insole can be removed, sprinkle cornstarch, talcum powder or talcum powder on the sole after removing the insole. Then put the insole back in and see if the insole and sole fit better. These powders absorb moisture from the shoe and reduce friction between the insole and the shoe.

If your shoes only squeak when you walk on a tile or wooden floor, try applying some powder to the bottom of your shoes. Just be careful when walking, because the friction between the sole of the shoe and the ground becomes less when the powder is applied, and people are more likely to slip.

Polishing the tongue. Sometimes, the squeak of the shoe comes from the friction between the tongue and the inside of the shoe. Just sand the tongue with sandpaper can easily solve this problem.

Take some sandpaper or nail file and smooth out the friction between the outer edge of the tongue and the inside of the shoe. If you don't want to use the method above, then glue the breathable tape to the tongue. Wrap the edge of the tongue with breathable tape so that the part that rubs against the inside of the shoe is also covered.

It may be that the shoes are watery and damp, or the nails inside are loose, and the air enters the cracks and does not creak, go to the shoemaker to help you fix it again.

If the sole creaks, it should be that the quality of the sole is not too good, and if it is soft, it will not sound.

Two workarounds:

1. If there is a sound inside the sole, the inside of the sole is empty. Drill a small hole in the sole, and then pour the glue from the sticky shoe into the small hole, fill it up, dry with glue, and make no sound.

2. If there is a sound on the sole, it needs to be treated with shoe polish. If the shoes squeak, you can apply shoe polish to the seams between the body and the sole, and leave the shoes overnight to help reduce friction between the shoes, and be careful not to apply too much shoe polish.

1. When the outsole with high rubber content meets a clean and high-gloss ground, there will be a sound of friction, which is normal.

The sub-combination of the earth, when walking or exercising, will be out of place friction, normal.

3. When the outsole and midsole are combined, the glue accumulates or lacks glue, and the glue is lacking. I wear it and slowly delaminate inside, and there is a sound at one time, too.

The reasons why the soles of sneakers squeak when walking are as follows:

1. The friction between the sole and the ground is a good thing, indicating that the sole has a large friction and is not easy to slip, which is normal.

2. If the sole itself rings, carefully check whether the glue is open, and take it to the store for maintenance in time, otherwise the life of the shoes will be reduced after a long time, and you can also go to the store to ask the clerk to help you check.

Extended Information: Daily Cleaning of Sneakers:

1. When the shoes are dirty, you can gently brush them with water dipped in detergent, then rinse them with water, and place them in a ventilated and cool air dry to avoid direct sunlight. Do not use heating or open flame for drying, so as not to cause aging, glue opening, fading and serious deformation.

Excessive direct sunlight, heat from the hair dryer and improper care can reduce the lifespan of your shoes. It cannot be soaked for a long time when washing, and the general soaking time should not exceed 20 minutes. Leather shoes should not be soaked in water.

2. Most of the raw materials of sports shoes are synthetic polymer materials (mostly polyester nylon mesh and non-woven artificial leather, and the soles are mostly made of rubber or rubber foaming materials), and some uppers are leather, so avoid contact with organic reagents and oil solutions, and at the same time, it is not suitable for long-term wear in a high temperature environment. Generally, the wearing or washing temperature should not be higher than 45 degrees Celsius.

3. If it is stored for a long time, the shoes should be brushed and cleaned first, and then stored in a cool and ventilated place after drying, so that the shoes have enough time to dry to avoid mildew. It is best to prop up the inside of the shoe with a paper ball or shoe support to avoid serious deformation.

Dry the toe with the toe toe facing down and the sole facing the wall in a ventilated place at room temperature to prevent water from soaking into the midsole foaming material. (Because the foam material does not dry easily, it is recommended not to lay the shoes that are not wet.) ）<

The reasons why the soles of sneakers creak when walking are as follows:

1. The sole is worn.

Wear and tear of the sole can cause the sole to rub against the ground, creating a creaking sound, and the sole or the entire shoe needs to be replaced.

2. The material of the sole is problematic.

The coefficient of friction is different depending on the sole material, and some sole materials are prone to crunching sounds, and the sole or the whole pair of shoes need to be replaced.

3. The contact area between the sole and the ground.

If the contact area between the sole and the ground is insufficient, the friction between the sole and the ground will increase, resulting in a creaking sound, and the sole or the entire shoe will need to be replaced.

4. Humidity between the sole and the ground.

The humidity of the sole is different from the ground, which will also affect the friction coefficient between the sole and the ground, resulting in a creaking sound, and the sole or the entire shoe needs to be replaced.

How to buy sneakers:

1. Different sports types need different shoes, such as running shoes, basketball shoes, football shoes, etc., and you need to choose the corresponding shoes according to your own sports type.

2. Measure your own foot shape, including foot length, foot width, arch height, etc., so as to choose the right shoe size and shoe type.

3. When trying on shoes, put on sports socks and walk a few steps to feel the comfort and stability of the shoes in order to choose the right shoes.

4. The weight of the shoe is also an important consideration, and lightweight shoes can reduce the burden and improve the efficiency of exercise.

5. The material of the shoes is also very important, different materials have the same breathability, wear resistance and comfort, and it is believed that the root type Tandong chooses the right material according to their own needs.

6. The support of shoes is also very important, and it is necessary to choose shoes with good support to protect the feet and joints.

7. The wear resistance of shoes is also an important consideration, and it is necessary to choose shoes with good wear resistance to prolong the service life of shoes. <>

The soles always creak and creak and the solution is as follows:

1. Sprinkle powder: Sprinkle some powder into your shoes. Sometimes, the squeak can be caused by the friction between the insole and the sole.

Talcum powder, baking soda, corn flour are fine, and after removing the insole, sprinkle some powder on the sole. Then put the insole back in and see if the insole and sole fit better. If the surplus insole cannot be removed, rub the powder into the edge of the sole.

These powders reduce friction between the insoles and the shoe. (as shown in the image below).

2. Plugging paper: Stuffing a paper towel or drying paper into the shoes can also make the shoes quiet, first take out the insoles, then put the paved paper towels or drying paper in, and finally put the insoles back into the shoes. (as shown in the image below).

The maintenance method of shoe glue is as follows:

1. Pour the same amount of detergent, laundry detergent, two spoons of baking soda into a bowl, squeeze two centimeters of toothpaste, and stir well with chopsticks after setting.

2. Take out the shoes with the sole glued open, open the glue opening place, and wipe the rubber opening stool with a rag, so that there is no dust in the inside. Use a cotton swab or a small brush, dip it in homemade all-purpose glue, and apply it evenly to the area where it needs to be bonded.

3. Pay attention to the place where the all-purpose glue is applied, as long as you evenly apply each position, and then press the place that needs to be glued with your hand. Press it until the sole is glued, then put it in a ventilated place for about 20 minutes, and it will basically stick. <>

Walking shoes creak because of problems with the insoles and soles.

1. The creaking sound of walking shoes is due to the problem of insole and sole, because the sole material is affected by the change of external temperature and air pressure, and the insole and sole material will change, resulting in the sound caused by friction on the upper and lower surfaces of the mat.

2. There is also the aging of the pylon material in the midsole, the compression ratio decreases, the midsole collapses and the support decreases, the weight of the whole body is borne by the air cushion, and the excessive compression of the air cushion during exercise causes the shouting friction, which generally occurs in the full-palm air sole situation, there is no solution.

Solution: Apply a little shoe polish or leather care solution to the seam between the body and the sole of the shoe to reduce the friction between the sole and the ground, and reduce the squeak. You can sprinkle powder on the insole, such as talcum powder, baking soda, etc., and after sprinkling the powder, the insole and the shoe will become softer, which can reduce friction, and thus reduce the sound of friction.

You can choose to use a paper towel or dry paper to stuff it in your shoes, so that the noise of the shoes will be much lower. <>