How does Apple look at the power life, and where does the Apple battery life look

Generally speaking, there are two different ways to display the battery level of a mobile phone. One is to use the capacity color in the battery pattern to indicate the amount of power, and usually we can only roughly estimate how much power our phone still has. The other is expressed as a very intuitive percentage, which allows us to know very accurately how much power we have left.

Generally speaking, showing through accurate percentages is the method that many people prefer. Of course, in Apple phones it is no exception. So next, let's introduce to you how to set the battery percentage in the Apple mobile phone.

iPhone4s setup method.

Here we take Apple's iPhone 4s with the system firmware as an example. Find the "Settings" icon on your phone and tap to enter. Find the "General" option in the settings list and click to enter.

Then find the "Usage" option in the general list and click to enter. Next, find the "Battery Percentage" option in the usage list, tap to open it to display the battery level in the upper right corner of the phone screen. In the usage list, we can also see the statistics of "Time since last charge".

Usage time: The total amount of time your iPhone has been awake and in use since it was last fully charged. iPhone is awake when we're on a call, using email, listening**, browsing the web, or sending or receiving text messages, or when our phone is doing background tasks like automatically checking email.

These two statistical times are the time we care about, and the longer the time used, the shorter the standby opportunity. Standby time is what we usually call how long a battery can last.

How to set up iPhone6S.

Tools Raw materials: iphone, ios and other versions of the system are similar). Method Steps:

When we turn on the iPhone 6S phone, the battery level icon in the upper right corner will not be displayed as a percentage. Well, we need to find the settings icon on the iPhone 6s home screen, tap to open it. At this time, enter the iPhone 6S settings page, scroll down, find the battery column, and open it directly.

In the battery settings page that opens, we can see that the battery percentage option is currently turned off, and we can directly click the switch on the right to turn it on. At this time, we can see that the battery level icon in the upper right corner has a percentage display.

Summary: In the above, we have introduced how to set the battery percentage in different models of Apple mobile phones. Generally speaking, the settings in Apple phones are very similar.

Therefore, you can use one of the methods to push the settings of Apple phones in other models. Therefore, everyone is too rigid about which model of mobile phone to use which method. Of course, the Apple mobile phone models that are not mentioned above can also be deduced through the introduction above.

For Apple mobile phone users, it may be that after a year of using a mobile phone, you will start to feel that the battery life of the mobile phone is not so good, in fact, as long as your iPhone battery health is less than 80%, you need to replace the battery.

1.Open the settings function in the iPhone, as shown below

2.Scroll down on the Settings page and find the battery, as shown below

3.Then enter the battery page, and there is a battery health in the middle of the page, as shown below:

4.Then you can see the maximum capacity percentage of the battery displayed on the battery health page, as follows, if your battery is less than 80%, then you can consider replacing the battery.

5.In the battery page, let's scroll down and see the power usage of different software you use.

1. Turn on your phone, find the settings button on the desktop of your phone, and click to enter.

2. After clicking to enter the settings interface, find the battery option and click to enter.

3. After clicking to enter the battery interface, find the battery health option and click to enter.

4. Then you can see the maximum capacity percentage of the battery displayed in the battery health page.

The steps to see the battery life of the iPhone are as follows:Operating environment: Apple XR, version, etc.

1. First, find the "Settings" icon on the desktop and click to enter the settings.

2. Swipe down on the settings interface, find "Battery" and click on the mold to enter.

3. Find "Battery Health" on the battery page and click to enter.

4. You can see what the current maximum battery capacity is on the battery health interface.

Tips to extend iPhone battery life:1. Try not to use your mobile phone when charging.

When charging the mobile phone, it should be placed in a cool place as much as possible, and reduce the use of the mobile phone, especially playing games while charging, which will cause a lot of heating of the iPhone, causing damage to the battery and improving premature aging.

2. Do not use less than 65% to 85% of the electricity.

According to the test experiments, it is found that maintaining the battery power between 65% and 85% for a long time can make the battery life longer.

3. Remove the protective shell of the side mold group when charging.

When you charge your devices together in some types of cases, too much heat may be generated, which can affect the capacity of the electric transport orange pool. If you find that your device is getting hot while charging, remove the case first.

The method of looking at the battery life of the Apple mobile phone is as follows:

the environment: iphone13, system, etc.

1. Open the settings interface of the phone, and click the battery option in the page to enter.

2. After entering the battery page, click the battery health option on the page to enter.

3. After entering the battery health page, you can see the health attributes of the Apple mobile phone battery.

Introduction to the functions of the iPhone:

1. Desktop shortcut function: Many times it is urgent to use a certain function in the app, and the Apple mobile phone can pop up the shortcut function by long-pressing the desktop icon, and it can be quickly started without opening the app, for example: long-press WeChat:

2. Voice memo: Apple mobile phones also have a recording function, which is actually a voice memo. You only need to open the voice memo, and you don't even need to bring paper and pen.

3. Hide private**: Apple Album has no encryption function, and some**don't want others to see it, you can select** and hide it. Also, don't forget to choose not to show the [Hidden] entrance in the album settings.

4. Lock **: If you feel that hiding ** is not safe enough, you can also lock **, open the memo, click the camera button at the bottom, add**, select [lock memo], set an independent password, and then delete the ** in the album. Rotten land.

How to look at the battery life of the Apple mobile phone is explained as follows

1. Check the battery capacity, Apple officially provides a function to check the battery health, which is convenient to know the maximum capacity of the current iPhone battery. Open [Settings] on your phone, find [Battery], there is a [Battery Health] entrance, you can see [Maximum Capacity] after entering, and the percentage behind is the actual capacity of the current battery. Sometimes there is a situation where the capacity exceeds 100%, usually on a new phone, and this situation indicates that the iPhone battery is in very good condition!

However, the current battery capacity is not the only criterion for checking the health of the battery, and the number of charges is also an important reference. Second, query the number of charging times, query the number of charges, here to use our old friend [shortcut], the background reply keyword to get the ** link, and then use the safari browser to open and add. Once you've added it, it looks like this:

Then go to the iPhone's Shed Correction [Settings] - [Privacy] - [Analysis and Improvement], turn on [Share iPhone Analytics], and click to view [Analysis Data]. If it's closed, open it and wait until 8 a.m. the next day to move on to the next step. If [Share iPhone Analytics] has already been turned on or is already the second day of opening, click to enter the analysis data page

There are a lot of data rush beam chain remarks here, we just need to find the log-aggregated starting file. Open the latest date, click the share button in the top right corner - click on "battery health", which is the shortcut we added earlier. In less than a second, the analysis results will be displayed at the top, including the number of battery cycles, design capacity, actual capacity, and battery life.

Finally, the results of the analysis can be saved for later comparison. Open the shortcut app, tap "Battery Health" to run, and select History to view all saved analysis results.