How do you weave a letter bracelet? How to knit a bracelet

This one is very simple, I went to buy the letters and strung them together, and I made three twists when I was a child.

It can be made to order on **.

In the form of braids, just put a letter in the middle.

1. Press down a long enough colored rope from the top right to the left to wrap it into a circle. The left side is short, the right side is long.

2. Fold the lower right side into a circle.

3. Fold the coil, press the intersection, and thread the double wire into the trap on the upper left. Form new traps, tie them into a knot.

4. Pull up the rope of the loop, and stuff the rope into the trap below the upper circle, and then it becomes a new trap, so that the double line of the long line of the rope that is folded in half is continued to be extended after being tightened, and so on.

5. When the length of the bracelet is slightly longer than the circumference of the wrist, it can be finished.

6. The right and left sides of the rope are interspersed with each other, and a lover's knot is tied at the beginning and the end, so that it is closed to form a beautiful love bracelet.

You're so general, is it beads or ropes? Beads directly buy thread and beads on their own, rope art you can search for a simple basic knot tutorial on the Internet, the general bracelet is made of basic knots, very simple, but you also have to buy your own thread, if necessary, you need other tools

When weaving the bracelet, the rope is prepared first, one of the ropes is fastened, and the other rope is tied in the middle. Then fold a rope in half and twist the twist, wrap the left rope around the right rope, wrap the right rope counterclockwise, and then wear it out from the back of the left rope loop, tighten the left rope loop, tighten the right rope loop, and the other rope is the same, weave to a certain length and make a loop buckle.

How to weave a bracelet.

When weaving the bracelet, prepare two ropes with a lighter color and different colors. Then fix the middle of one rope, tie a knot in the middle of the other rope to hold the position, and then combine the two ropes together.

Next, use a rope to bypass, tie a diamond knot, first twist the rope from the middle, twist the rope to a certain length, burn the rope, and then wrap the left rope around the right rope, wrap the right rope counterclockwise, and thread it out from behind the left rope loop, and then tighten the left rope, and then wrap around a circle, and then tighten the right rope loop, and so on, the other rope is the same.

Wait until the diamond knot is braided to a certain length, make it into a ring shape, adjust the distance appropriately, and then buckle the ring to the knot to wear. It should be noted that the bracelet needs to be worn on the wrist after braiding to make adjustments.

How to weave a bracelet:

First, the steps. 1. Prepare 6 threads first and tie a knot together.

2. Pick up the two lines on both sides, wrap around the middle four lines, and use one of the two as the starting line to tie a neat knot.

3. After tightening slightly, tie a knot with the starting line from the other side.

4. Tie the knot 5 times in a row in this order.

5. After that, the top one of the top sides is slanted down, and then all the threads are knotted around this line, and each line is tied twice in a row.

6. Then turn the line in the opposite direction, at an angle of about 90 degrees. Continue to tie the knot around this line.

7. Continue knitting in this order until it fits the length of your wrist.

8. When waiting for the end, repeat the third and fourth steps to tighten the knot of 5 finishes.

9. After the knotting is completed, tie several threads together to form a knot symmetry.

10. Cut a small piece of line, pull up the two ends of the bracelet like the middle, neatly, and continue to tie a few neat knots.

Second, the introduction of bracelets.

A bracelet is a kind of jewelry, worn on the wrist, mostly gold and silver and other metal products, but also ore, crystal, etc. Bracelets are chain-shaped, and their main purpose is to pray for peace, calm the mind, and beauty.

3. Efficacy. Wearing pink crystal can ** your love trauma and reduce emotional troubles. Therefore, it is not an exaggeration to say that pink crystal is the stone of love.

If you are in business, placing a seven-star array or ornament made of pink crystal in public places can increase the traffic of your store, establish good public relations and promote business.

The tutorial for weaving a bracelet is as follows:

Tools Raw materials: embroidery thread, scissors, etc.

1. Select a few strands of embroidery thread you like. Embroidery threads are thicker than regular sewing threads and have a wider variety of colors. A variety of colors can be chosen to create a stripe effect. The higher the number of strands, the wider the bracelet.

2. Measure the first strand. The length of the thread is slightly longer from the fingertips to the shoulders and then cut shorter.

3. Trim the remaining lines according to the cut lines. At least 3 strands, but you can as many as you want. Generally, the bracelet made of four to six strands is thinner, and the bracelet made of eight to ten strands is thicker.

4. Pin the bracelet to the pants with a pin during the production process. Tie a square knot at the end of all the lines and fasten them. There are many ways to fasten the bracelet, and you can choose the one that is convenient for you.

5. Wrap the leftmost strand around the nearest strand on the right strand and tie the knot. The first strand on the left goes around the front of the second strand, winds back behind, and finally passes through the top through the taut end to tie a knot. Repeat the above to tie the second knot.

6. When tying the first strand, tighten the second strand. The first strand is knotted with the second strand, not with the second. Move parallel to the right on the entire line.

The knot method is the same as described in the previous steps. Eventually, you'll find a whole row of nodes of this color.

7. Repeat the above weaving until the length of the bracelet is moderate. It's best to try it on your wrist to see if it fits, preferably with two fingers that can be inserted, because the bracelet will shrink and tighten after being immersed in water.

<>9, the ancient girlfriend bracelet is ready.