Nokia E63 function keys freeze

**Anti-virus software to see if it is poisoned There is also a kind of keyboard lock but some of the windows you open are not closed So the windows you open can still be used normally but not in the menu You can close the open window and then show that you unlocked it Then it is not the problem of your machine If your keyboard is not locked, then it is the problem of your machine itself.

Mine is the same, I bought it in Gome, changed it three times, and it cost a lot of money to return it.

Which of your function keys is set?,Is it the problem of this key?,You don't have any software installed, it shouldn't be poisoned, you can change the setting key of a function table, see if you can solve it, if it doesn't work, go to the profiteer to change.。

There is too much cache, turn off the card and unplug the battery, and then put it back on, try it.

Handled on a case-by-case basis:

The white screen is too long but can be turned on: The mobile phone has too many software installations, and the boot initialization is slow.

If the white screen is too long and does not turn on: the software is faulty, and the phone is hard first. Hard-grid invalid flash.

Shut down with a black screen after a period of white screen: Flash the computer directly.

Sometimes the screen is white, sometimes it is not: check the battery contact first, and then consider the software failure.

Hard method: Press the green key + red key + camera button + power off button at the same time, and press and hold the four keys at the same time to power on until the handshake animation appears on the screen. After the hard grid is successful, the initial setting will be prompted. All user information of the mobile phone is reset and deleted.

Hard-grid machine for a while. Remember to remove the memory card. At the same time as the device is turned on, press *3 and the call green button will appear, and wait until the formatting ...... appearsIf it doesn't show up, turn it back on and press those three keys again.

The grid machine must ensure that the battery power is sufficient, and the power cannot be cut off in the middle, otherwise it will be completely scrapped.

I'm sorry, so many don't have much to do with it.

The only way, mobile phone failure, please send after-sales treatment, such as within the one-year warranty period, since the free warranty.

Don't fool around yourself, it's mainly a motherboard or system problem, big and small, or send it for repair. **It's not too high, and there's no need to fix it if it's high, after all, 5200 is really not good.

The easiest way is to go to a regular store and re-flash the machine.

The following is for reference.

1. The situation of white screen is the most common, it is caused by a bad screen, a cable, an IC and a motherboard, depending on what causes the white screen.

2. In the end, the problem can not be solved, only bring your purchase invoice to the designated maintenance point for repair.

It's broken

Try booting it with a hard grid

If you can't open it, you can only take it for repair or replace it

There are a lot of ways to do it with a hard grid

I'm too lazy to write.

Maybe it's the software that is in conflict with the system.

Are you hard-wired before the phone appeared, here's a tutorial you can take a look at, hope.

Try to uninstall the recently installed software, which may be caused by software conflicts.

This is the "doomed" of the 5130xm, and every mobile phone will have this catastrophe sooner or later. There are two ways to solve the problem: first, send it to Nokia customer service, explain the reason, and repair it free of charge during the warranty period, which can be solved in about four hours in the afternoon; If the warranty period has passed, choose the second option:

Search on "5130 strong brush" and "phoenix strong brush", etc., there are very detailed fool brush tutorials, little by little.

OK. Good luck

In view of the current situation of your mobile phone, it may be that the battery is in poor contact, just use a needle to dial the contact of the battery in the middle.

Or wipe the battery contact piece with an eraser.

There may also be a problem with the mobile phone system, which requires a hard grid machine, and the method is as follows:

Solution. Hard-mounted machine plus formatted memory card.

Hard Grid Machine Method:

After the power is turned off, then press and hold the call button, the 3rd button, and the * button at the same time, and then press Power On. Don't let go, at this point the phone has already started to format. Press one piece, don't let go of one, and wait for the phone to automatically turn on and ask for the input time to complete the grid.

"There was a murmur from the horn and then it fell once, okay", this is a hardware issue, don't discuss it.

Automatic shutdown: One: It has nothing to do with the virus, if there is a virus, it is not as simple as automatic shutdown, then it will not be able to turn on the machine directly! It may be a system problem, and if you want to take it to the after-sales point to upgrade, the problem is not big.

Two: It may be that the battery is loose. The battery of the E63 is bayonet set and can be easily loosened. Just use a knife to pull the battery chip in, and you can clamp the phone.

I make mobile phones, trust me!

It is possible that the installed software is not compatible with the operating system. It is recommended to find a regular mobile phone store to re-flash the phone, which can generally solve the above problems.