Good headphones, is it necessarily suitable for burning?

This is not necessarily, when the mobile phone headphones leave the factory, if the pitch has been adjusted, there is no need for special popping, you can also use it, but it will be better to boil the tone for a while.

Not necessarily, but the earphones that are suitable for burning the computer must be good headphones. If you want to burn the phone, you can buy Cleer's headphones, which have two ambient sound perception modes, and you can hear the surrounding sounds without taking off the headphones, which is very convenient.

Good headphones are sure to be suitable for burning, and the standards actually vary from person to person, and some just require good sound quality to be considered good headphones.

Not necessarily, good, headphones are not necessarily suitable for burning, you have to choose a professional.

This is not necessarily, you have to find the right one.

If you have good headphones, this is basically a different business, like some headphones are used with multiple headphones, and some headphones are headphones for listening to ** dramas.

Theoretically, that's the case, because good headphones themselves will increase a part of the use time according to the length of use**.

Hello, not really.

Not all of them are suitable.

Again, you need to choose carefully.

Good headphones are better in sound quality and effect, and more durable, so burn the machine.

I don't think so, because prolonged use can damage the ears.

That's not necessarily, it depends on what kind of thing.

Hello! The purpose of burn-in is to make the headphones or speakers get better sound quality, not which headphones are suitable for burning.

The earphone belt will cause some damage to the ears for a long time, and it is recommended not to cook ** porridge for a long time.

Hello, good headphones refer to ***, good sound quality, suitable for calling**Oh!

You have to look at some devices, some of them are supported, and some of them are not.

Good headphones are also harmful to the ears, try not to wear headphones for a long time.

This is still not necessarily, Cleer Ally recently used it again and felt that it could still be burned, and the previous headphones had been boiled for a long time without effect.

Good headphones are sure to fit, and I think it must be a lot of features that are suitable for use.

It is necessary to burn the machine, and it can really improve the sound quality.

After burning, the three frequencies will be slightly improved, and the sound field will be more open and more transparent, but you also need to divide headphones and your own listening habits.

Headphones of three or four hundred and below do not have the need to burn in, especially when listening to pop and folk songs, and non-professional ears will not be able to hear the difference at all.

But if you want better sound, in addition to having good headphones, there is still a process of burning. Just like a high-end car, although the configuration is high, people like to walk after buying, let the accessories inside run in, and then drive to have a better sense of comfort. The same is true of headphones, the process of burning the machine is actually a run-in between the various units in the headphones and the human ear, especially the HIFI earphones, the sound improvement is still relatively obvious after the headphones.

Headset classification

1. Moving coil type.

Dynamic headphones are the most common and common type of headphones, and their driver unit is basically a small dynamic speaker with a voice coil in a permanent magnetic field that drives the diaphragm connected to it. Dynamic headphones are relatively efficient, and most of them can be driven by the headphone output on the audio, and they are reliable and durable. Generally speaking, the larger the diameter of the driver unit, the better the performance of the headphones, and the maximum diameter of the driver unit in consumer headphones is 70mm, which is generally a flagship over-ear headphone.

2. Dynamic source pin iron type.

The moving iron type is a headphone that is transmitted to the center point of a miniature diaphragm through a delicately constructed connecting rod to produce vibrations and sounds. Moving iron headphones can be easily placed in the ear canal due to the much smaller size of the unit. This effectively reduces the area of the ear part and allows it to be placed deeper into the ear canal.

The geometric structure of the ear canal is much simpler than that of the ear pinna, and it is quasi-round, so a soft silicone sleeve hail cavity can play a good role in sound insulation and sound leakage prevention compared with traditional earbuds.

Advantages: The edge of the diaphragm of the new earphone is relatively tight, with large elasticity and small compliance.

Disadvantage 1, the earphone, can not use electronic **, the bass component in the electronic ** is too strong, for the high sensitivity of the earphone may be overloaded, resulting in irreparable physical damage.

2. You can't use a single frequency sound signal to test the headphones, especially don't use the low-frequency signal to measure, the human ear is very insensitive to the response of the low-frequency signal, such as the 20Hz signal If you can hear it, then the power of the headset must have been overloaded, and some low-power headphones are likely to have been burned out or the voice coil is deformed.

First of all, we must understand the purpose and principle of cooking headphones, if you really want to say that the disadvantage is to endure a period of time without fever, the principle is as follows:

1.The main purpose of cooking headphones is to make the mechanical system of the headphones a rapid aging process, the sound system of the dynamic headphones is driven by the voice coil, and the diaphragm is fixed to the frame of the headphones.

2.Theoretically speaking, the diaphragm movement should be a piston (vertical) movement, which requires the edge of the diaphragm to have a greater compliance, the pot is the pot here, the diaphragm edge of the new earphone is relatively tight, the elasticity is large and the compliance is small, the earphone is to let its edge move, the sound is not so tight.