How good is the battery charging method for the Honor 30?

Modern people are probably the most inseparable from mobile phones every day, mobile phones occupy almost most of our daily life, once the mobile phone is out of power and turned off, it seems to have lost the world. Nowadays, mobile phone power anxiety has become a problem faced by many people, and manufacturers are also trying their best to improve battery capacity and reduce mobile phone power consumption, but in the face of power anxiety, the most effective way to alleviate it is charging, and the continuous development of fast charging technology has gradually alleviated the charging problems faced by people.

Honor launched a new Honor 30 series of new phones on April 15, of which the Honor 30 Pro+ mobile phone is equipped with 40W wired super fast charging and 27W wireless super fast charging, in addition to the strong fast charging effect, Honor 30 Pro+ is also equipped with a 4000mAh large battery, dual super fast charging + large batteries make Honor 30 Pro+ a big nemesis of power anxiety at this stage.

Today, we put the Honor 30 Pro+ through wired and wireless fast charging to see how the Honor 30 Pro+ performs with dual superfast charging.

According to the official introduction, the Honor 30 Pro+ phone can be fully charged to 100% in 1 hour with 40W wired super fast charging. According to the tests, the Honor 30 Pro+'s 40W Super Fast Charge was fully charged to 65% in 25 minutes (1500 seconds) at 0 battery, and it was completely charged in 50 minutes.

In the curve, we can see that the Honor 30 Pro+ mobile phone is supported by 40W wired super fast charging, and in the first ten minutes, the power of the Honor 30 Pro+ has recovered by nearly 30%, and if we need to replenish the power in an emergency, the charging performance of the Honor 30 Pro+ can definitely quickly alleviate the current demand for mobile phone use.

The 40W wired super fast charging technology supported by the Honor 30 Pro+ has been certified by TÜV Rheinland for safe fast charging, which ensures charging safety through 15 layers of protection and 3 layers of identification.

The unit of time is seconds.

Looking at the performance of 27W wireless super fast charging, the Honor 30 Pro+ uses a 27W wireless fast charger to charge at 0 power, and completes 35% power recharge in 30 minutes, and basically completes more than 70% power recharge in 1 hour.

Time is measured in minutes.

The 27W wireless super fast charging technology supported by the Honor 30 Pro+ can be charged with a universal wireless charger that conforms to the Qi protocol, and with Honor's own Honor wireless charger, it can better meet our daily use needs. We only need to put the mobile phone on the wireless charger in daily office or home conditions, and we can quickly carry out wireless charging without being bound by complicated cables.

In addition to the 27W wireless super-fast charging, the Honor 30 Pro+ also supports wireless reverse charging, a feature that can help other phones and earphones in case of emergency.

The battery of Huawei Honor mobile phone is not durable, and it didn't take long to run out of power, obviously it was charged to 100% when charging, and it didn't take long to run out of power when it was used, and a camera phone directly prompted that there was no power to shut down, this is that the battery generated a lot of virtual electricity, and the battery was no longer durable, what should I do if I encounter this situation? Today, Honeypot Ant Decoration Network will introduce you to the common treatment methods of Huawei mobile phone batteries that are not durable.

1. Replace the battery with a new one.

This is one of the best methods, if the battery has been used for more than 2 years, such a mobile phone battery will basically produce a lot of virtual electricity, this is the case with Huawei Glory, the battery is not durable, then replace it with a new battery, you can find Huawei's official after-sales replacement or find some e-commerce platforms for replacement, or some mobile phone repair shops.

2. The solution to the non-durable battery of Huawei brand mobile phone.

1. Charge your Huawei phone to about 60% to 75% of the battery.

2. Turn on the keyboard and enter **, this is the number of the entry system, be sure to enter the keyboard correctly when dialing**.

3. When the mobile phone enters the project menu, there will be the following options, which are background settings, board information query, network information query, software upgrade, factory reset reset, and power replenishment.

4. Select the option of "Replenishment", and the mobile phone will begin to enter the state of replenishment, and the replenishment will be completed in a while.

5. When the battery level is 60%, connect the charger and click the charging function, and after entering the page, it will display that the charging is being replenished, until the power is replenished to 75% or the charging logo next to the battery disappears.

6. After the power is replenished, you can unplug the charger and use it normally.

At present, the problem of virtual power of Huawei mobile phones is generally very easy to solve, or it is necessary to use the power replenishment function of Huawei mobile phones to solve this problem without spending money, but sometimes the battery is aged for a long time and is not durable, and this power replenishment function is not very practical, so it can only be replaced with a new original battery, so that the mobile phone will become easy to use.

Well, theoretically, it's better to charge it after shutting it down. It's okay to wait for a few charges. When I'm not using my phone, I forcibly stop all running programs directly in the app manager.

Then turn off wifi, bluetooth, nfc, gps, which is more power-saving. It's the same when charging, it's best not to play with your phone while charging.

Precautions for mobile phone battery in daily use:

1.It is recommended to use the official standard charger to charge the battery to ensure that the charging voltage is stable and meets the standard.

2.Theoretically, keeping the battery in the middle range of power for a long time (around 50%, such as 30%-70%) is more conducive to prolonging battery life, therefore:

It is recommended to unplug the phone in time after it is fully charged, as the phone will be in a high power state for a long time, which will cause the loss of the battery to accelerate.

Try to avoid waiting until the battery is below 20% charge before charging the battery, as over-discharging can cause the battery to wear out faster. It can be charged as you go to prolong the life of the battery.

It is recommended not to leave the phone idle for a long time, and the battery should be fully charged from time to time. If the phone is not used or charged for a long time, the battery will be completely consumed, which will lead to abnormal charging or failure to charge.

3.A battery temperature that is too high or too low will affect your phone's battery life, therefore:

Try to avoid placing your phone in an environment with low temperatures, high temperatures, or large temperature differences.

Try to avoid using your phone while charging. Using the phone while charging can easily cause the phone to heat up, and discharging it for a long time at high temperatures will exacerbate battery loss.

<> demo brand model: Honor 30; System:.

1. The original charger of the Honor 30 is 10V 4A, and the battery capacity of the Honor 30 is 4000mAh (typical).

2. Honor 30 supports 40W super fast charging, charging time is 1 hour, 30 minutes can charge 75% of the power, Honor 30's battery capacity is 4000mAh (typical) Note: The battery rated capacity is 3900mAh.

The Honor 30 comes standard with a 10V 4A charger.

The battery capacity of the Honor 30 is: 4000mAh (typical) (Note: The battery is rated at 3900mAh).

Here are some of the parameters of the Honor 30 battery::

Please pay attention to the following matters in daily use to protect the mobile phone battery and prolong the service life:

1.Please use the official standard charger to charge the battery to ensure that the charging voltage is stable and meets the standard, so as to avoid affecting the battery use.

2.Theoretically, keeping the battery in the middle range (e.g. 30%-80%) is more helpful for extending battery life, thus:

It is recommended to unplug the charger after the phone is fully charged, and avoid charging for a long time or being in a high power state for a long time to accelerate the aging of the battery, so as to prolong the battery life.

If the mobile phone is idle for a long time, it is recommended to turn off the mobile phone and charge it regularly to maintain about 50% of the battery. If the phone is not used or charged for a long time, the battery may trigger over-discharge protection, resulting in abnormal charging or failure to charge.

3.Too high or too low a temperature can affect your phone's battery life, so:

Please try to avoid using your phone in low-temperature, high-temperature, or high-temperature environments.

It is recommended to try to avoid charging and using it for a long time, especially in high-power operation scenarios (such as watching, playing large games, etc.), at this time, the heating of the mobile phone will intensify, and charging and discharging for a long time at high temperatures will accelerate the aging of the battery.

The battery of the Honor 30 is still relatively durable, but it still depends on the specific situation, for example, you have more apps, the frequency of use is higher, or its storage is relatively slow, then it is more power-consuming.

Your phone can't enter fast charging mode, which can be done by the following methods:

1.Please confirm that your phone and charger support fast charging.

Please check the output parameters of the standard charger and judge whether the device supports charging mode according to the following bending brief information to determine whether it has entered the fast charging super fast charging mode.

Normal charging: The icon is a single lightning, and the maximum output parameters of the standard charger are 5V 1A, 5V 2A.

Fast charging: The icon is a large and a small double lightning, and the maximum output parameters of the standard charger are 9V 2A and 10V 2A.

Super fast charging: The icon is double large lightning, and the maximum output parameter of the standard charger is 10V or.

2.If your device supports Fast Charge (or Super Fast Charge) mode, but the normal charging icon is displayed when charging.

1) Please check whether there is any foreign matter or dirt in the interface.

Please make sure that the charging port is clean and the port connection is stable before charging your phone.

2) It is recommended that you use Huawei's official recommended charger and data cable.

If none of the above methods fail, we recommend that you back up your data in advance (third-party apps such as QQ and WeChat must be backed up separately) and bring your device, charger, data cable, and proof of purchase to a nearby Huawei Customer Service Center for testing.

Summary. Hello dear. It's 30 watts.

1.The Honor 30 Youth Edition is equipped with a 4000mAh rechargeable battery and fast charging, 2The battery also charges very quickly, charging 58% of the electricity consumption in 30 minutes.

3.The Honor 30 Youth Edition has two new colors, the new summer seven-color rainbow and the magic mirror silver, with a gorgeous and colorful mirror glass practical effect, 3In addition, the back is a matrix triple camera design scheme with side fingerprints.

How many watts is the Huawei Honor 30 Youth Edition charger.

Hello dear. Hello dear. It's 30 watts.

1.The Honor 30 Youth Edition is equipped with a 4000mAh charging state and an electric battery and fast charging, 2The battery also charges very quickly, and can be charged to 58% of the power consumption in 30 minutes.

3.Glory 30 Youth Edition has two new colors, the new summer seven-color rainbow and the magic mirror silver, with a gorgeous and colorful mirror staring glass effect, 3In addition, the back is a matrix triple camera design scheme with side fingerprints.

Dear, the charger is 30 watts, and it can be fully charged in about an hour.

Dear, I hope mine can help you.

Compare the heart] [compare the heart] [compare the heart] [compare the heart] [compare the heart].

Yes, but this is not conducive to the preservation of the phone's battery.

1. Different brands of chargers have differences in charging specifications and fast charging implementation principles, mixed chargers not only cannot achieve fast charging functions, but also may cause slow charging and slow charging, and there is a risk of damage to the mobile phone and charger, please use the standard charger for charging.

2. When charging, the charger, data cable, and mobile phone charging interface are not in good contact, which may lead to slow charging and inability to charge, please plug and unplug the charger several times.

3. Please check whether the joints and jacks are clean, if you find dust, it is recommended to wipe it with alcohol or clean it with a brush. If it is an alcohol wipe, wait for the alcohol to dry before recharging for confirmation.

4. Usually the low battery of the mobile phone is the charging speed is relatively fast, when the charging reaches more than 80%, the battery power is close to full at this time. In order to ensure the safety of use and prolong the battery life, when the battery is almost full, the charging current output by the charger will gradually decrease, and the charging speed will slow down until it is fully charged. The output current and voltage of the charger during the whole charging process are not fixed, but will be dynamically adjusted with the state of the mobile phone.

Summary. Phone fast charging does not support settings. If you are using a charger that comes standard with Huawei and your phone supports fast charging, it will automatically enter fast charging mode when you connect the charger.

Huawei Mate XS 2 9999 Mate 50 Pro 6799 Huawei Nova 10 Pro 3699 Huawei MateBook X Pro 8999View more official** Official service: Consignment service, appointment service, repair**Service center, repair progress.

The fast charging of the mobile phone does not support the spring, and the setting is set in a forest posture. If you are using a charger that comes standard with Huawei and your phone supports fast charging, it will automatically enter fast charging mode when you connect the charger. Huawei Mate XS 2 9999 Mate 50 Pro 6799 Huawei Nova 10 Pro 3699 Huawei MateBook X Pro 8999 Check for leaks and see more official** Official service Consignment serviceAppointment serviceRepair**Service center repair progress.

Fellow, I really didn't understand, I can be more specific.

Here's how to set up fast charging on your Huawei phone: 1. First, touch Settings on your phone's desktop. 2. Find the battery and tap on it.

3. Then click to turn on the super power saving switch. 4. Then click on the app to start management. 5. Then click the switch to turn off some programs that consume a lot of power.

6. Finally, connect the phone to the charger and start charging. Characteristics of fast charging circuit: 1. After the output voltage is set (such as 36V), if the charging bottle plate falls off and is disconnected, causing a group of batteries to be blocked, or a short circuit occurs, the battery terminal voltage will be reduced or zero, then the charger will have no output current, if the set voltage is 36V, misconnected to 24V, 12V, 6V batteries, etc., the charger has no output current.

2. If the two output terminals of the charger are short-circuited, the trigger circuit of the SCR in the charger cannot work, so the thyristor is not conductive, and the output current is zero. 3. When using the battery, the positive and negative poles of the battery are mistakenly reversed, the thyristor trigger circuit is reversed cut-off, there is no trigger signal, the thyristor is not conductive, and the output current is zero. 4. The use of pulse charging, is conducive to prolonging the life of the battery, because the low-voltage alternating current is pulsating DC after full-wave rectification, only when its peak voltage is greater than the battery voltage, the thyristor will be turned on, and when the pulsating DC power is in the trough area, the thyristor is reversed and cut off, and stop charging the battery, so it is pulsating DC that flows through the battery.

5. Fast charging, full self-stop, because the voltage at both ends of the battery is lower when the battery is just started, so the charging current is larger, when the battery is about to be sufficient, because the charging voltage is getting closer and closer to the wave peak of the pulsating DC output voltage, the charging current will be smaller and smaller, and it will automatically become trickle charging, and when the voltage at both ends of the battery is charged to the maximum peak value of the rectifier output, the charging process stops. 6. The circuit is simple, easy to make, and there is almost no need for maintenance and repair. Ben was netizen.