Is there anything to pay attention to if you want to polish nubuck leather shoes?

Is there anything to pay attention to if you want to polish nubuck leather shoes? When you go to polish your shoes, they know what to pay attention to, so you don't have to worry too much.

If you want to polish sanded leather shoes, you should pay attention to the need to change the sandpaper frequently, and the amount of sandpaper should be selected clearly.

When polishing this kind of scrub, you must pay attention to it, it is this strength, and then when you choose this bright oil, do not choose a particularly bright one, it may be better to have a special scrub.

First of all, the leather shoes should be cleaned up, and then the shoe polish for the leather shoes should be brightened for a short time, and then the shoe polish can be dried with a clean towel.

1. When cleaning the scrub shoes, you can use a soft brush to gently wipe away the stains, pay attention to rubbing in the same direction, so that the texture can be smooth, but do not rub the oil. Prepare the cleaning solution with 2 parts of dish soap, 1 part vinegar, and 50 parts of water (temperature 30 to 40), dip the solution with a shoe brush and carefully wash the surface of the shoes.

2. When washing and scrubbing, be careful not to soak the shoes in the solution, and try not to let the leather shoes be dipped in too much solution. When the surface of the shoes is basically cleaned, wash the surface of the shoes with clean water 1 2 times, and put the shoes in a cool and ventilated place to dry until semi-dry.

3. When refueling, use a brush to apply leather fatliquors or emulsified oil (which can be obtained from the tannery, and the oil content is controlled at 50 60%) on the washed and dried suede on an average basis, and the dosage is about 100 grams per pair of shoes. During the application process, care should be taken to allow as much oil as possible to penetrate into the skin.

The most afraid is oil! Especially not black matte shoes! If it's a good cowhide scrub! Generally, dirty things can be brushed off with a special brush! I'm afraid it's oil or something! You can only use toner or toner! It's troublesome!

When polishing this, you must pay attention to slow down, not particularly fast, and then just look at this strength, and then pay attention to it.

If you want to be careful not to touch it, but don't do it for a long time, because it will be easy to peel the skin. The cortex is not good.

If you want to clean the nubuck leather shoes, you must first gently brush the upper with a large shoe brush, then use a soft brush dipped in dish soap to brush lightly, and then air dry naturally, and then spray the renewer after air drying.

Step 1: Gently brush the entire shoe with a large shoe brush to see if the protruding part of the rim is stained with dirt and find out the dirty areas.

Step 2: Use a soft-bristled brush dipped in some dish soap to brush gently, being careful not to force it. Nubuck cowhide will whitish. Because they are all pigmented.

Step 3: After scrubbing, put it in a ventilated and cool place to air dry, and when the leather upper seems to be dry but not dry, then use a stiff shoe brush to dip some fluffing powder. Step 4:

After the upper of the shoe is dry, the shoe is protected by newspaper, and the renewal agent is evenly sprayed 15 cm away from the shoe. Renewal agents include brighteners, colloids (to enhance adhesion to other substances), pigments, solvents (dissolvable mixtures), etc. The purpose of spraying renewers is mainly to complement the color.

Black shoes are easy to turn white after wearing them for a long time, so it is best to use a natural color renewer.

Step 1: Cleaning.

Use 2 parts of dish soap, 1 part of vinegar, and 50 parts of water (temperature 30 to 40) to prepare a cleaning solution, dip the solution with a shoe brush and carefully brush the surface of the leather shoes. Be careful not to soak your shoes in the solution when brushing, and try not to let them get too much of the solution. When the surface of the shoes is basically cleaned, brush the surface of the shoes with water 1 2 times, and put the shoes in a cool and ventilated place to dry until semi-dry.

Use a brush to evenly apply leather fatliquors or emulsified oil (oil content controlled at 50 to 60%) on the washed and semi-dry suede surface, the dosage is about 100 grams per pair of shoes. During the application process, care should be taken to allow the oil to penetrate into the skin as much as possible. After 30 minutes, brush off the oil slick on the surface of the shoes with 35 degrees of water, and dry the shoes in a cool and ventilated place.

Step 3: Polishing.

After the wear and tear of nubuck leather shoes, the fibers on the surface will slowly fall off, and the leather will become smooth, forming a discordant contrast with the rough frost around it, which also affects the appearance. Therefore, for nubuck leather shoes, careful cleaning and maintenance are required. When the suede shoes are dry, use a wire brush or coarse sandpaper to brush the surface to recreate the fluff, and then brush with a brush.

After the above procedures, the suede shoes will be as good as new.

Scrub is also a good method, but many colors of scrub powder are not sold, so it is best to go to a specialized shoe-shine shop.

Who knows the trick of sanding nubuck leather shoes? I think in general, the polishing of nubuck leather shoes is a small trick. It's to take the school first, well, don't clean it up and take it later. Some matte to polish the shoes, so that it is relatively clean.

We can use a large shoe brush, gently brush the entire slope to see if there is dirt on the edge of the shoe, find out the dirty place, and then use a soft brush dipped in some dish soap water to brush gently, not too vigorously, because these shoes are also easy to fade. After that, we put the shoes in a cool place to air dry.

You can brush it with a shoe brush, don't use force, and a slight polishing will do.