How to renovate old wooden furniture? What s the solution?

Don't throw away old wooden furniture. You can turn it into new furniture yourself. The first step in renovating old wooden furniture is to remove dust and impurities from the surface, especially if there is paint on it, problems such as peeling and scratches will occur.

Therefore, the paint needs to be clean and can be removed by a grinder or sandpaper. The paint on the surface can be polished well. If you're worried that polishing will damage your furniture, you can use a paint remover, or you can remove old paint.

Wooden furniture has been used for a long time and inevitably there will be some damage and structural looseness. Therefore, it is necessary to repair it after the paint is peeling. If there are pits and nail holes in the surface, you can mix wood chips and glue and fill them into the holes for repair to ensure they are filled.

Excess parts on the surface can be scraped off with a scraper. If there are scratches or bumps on the surface, you can fill it with putty powder. If the structure is loose, it should be firmly fastened with tools, especially if the connection is loose or deformed, which will affect the use.

It has to be repaired. If there is a gap, you can use nails to nail it to the wooden strips, or remove and fix it with wooden bolts, glue, etc.

It needs to be sanded again. This large-scale polishing should be done with great care, making sure that every corner is sanded in place, which can completely remove some of the oil and dust from the surface, treat the surface burrs, remove the roughness caused by the surface filling putty, and make the entire furniture surface flat and smooth. When maintaining solid wood furniture, you should choose a soft cotton cloth to wipe the dust on the surface of solid wood furniture, and then wipe it with a semi-damp cloth.

Some stains can't be wiped off, you can add milk to wipe them, but you must wipe them with a clean rag, otherwise they will get dirtier and dirtier.

If solid wood furniture is not maintained, the paint on the surface will change color and turn yellow. Therefore, when maintaining solid wood furniture, you can gently wipe it with a clean rag stained with toothpaste. This method only works for a small range of color variations.

If the color change is severe, you can ask a professional repair company to repair it. You can wax solid wood furniture to form a protective film on the surface of solid wood furniture and keep the surface shiny, but it should be cleaned before waxing. You can't clean it with alcohol, gasoline, and other chemicals.

You can wipe it clean with hot tea and wait for it to dry before waxing.

Soak a clean rag in expired milk and wipe wooden furniture such as tables with a rag to remove dirt, and finally wipe it again with water. If the wood furniture has been burned by matches, etc., you can wipe it with half a lemon first, and then wipe it with a soft cloth soaked in hot water. Finally, use a dry soft cloth to quickly dry and polish it, and it will return to its original state.

If you want to renovate wooden furniture, you first need to use a certain amount of oil and various materials to maintain it, you can choose to repaint the wooden furniture, and brush a layer of oil, you can choose to repair some damaged furniture, and then renovate after repairing.

Fabric covers can be used, patches can be made locally, or refurbished stickers can be used. Some traces should also be sanded. Be sure to clean the surface of the furniture in a timely manner and reapply a coat of paint.

After cleaning the wooden furniture first, we can renovate our furniture very beautiful and good-looking; Brush a new layer of paint on the surface, make a layer of soft pack, or brush some putty powder on it, and after the putty powder dries, it is necessary to carry out fine polishing, and the furniture should be polished more beautifully.

How to renovate wooden furniture.

The first trick: old furniture renovation stickers.

The best-selling "furniture renovation sticker" on the Internet, made of PVC plastic, is very rich in varieties and colors, easy to paste, and can be cleaned with water, which is a widely used wallpaper in home decoration. After the sticker is attached to the surface of the table, there will be no cuffing. This sticker can be removed with a slight heat of the hair dryer, and it is easy to replace if you don't like it.

The second trick: repaint old furniture.

For wooden furniture, consumers are tired of seeing the old wood texture for many years, and they like to choose the way to paint the furniture to make it look new. However, not all furniture is suitable for painting, and the surface of panel furniture is often bonded with a layer of melamine board that is difficult to peel off, and the surface is painted with poor adhesion, compared to solid wood household items are more suitable for repainting.

Yes, now it is to advocate environmental protection, you can choose water-based wood paint to help change the color of wood furniture. The excellent water-based wood paint is quite good, simple and easy to construct, and the specific construction operation is as follows

Start by choosing what color you want to paint.

Antique lacquer is translucent, if there is originally a wood grain to show the original wood grain, polish it first, it also has to increase adhesion. Solid paint can be directly covered, and the color is more vivid.

If the surface of the construction is relatively smooth, you can brush the primer first to increase the adhesion Brush the primer 2 to 3 times every 3 hours or so After 12 to 24 hours, you can brush the color you want to brush 2 to 3 times Every 3 to 5 hours Finally, 48 hours of construction, you can brush a varnish again to play a wear-resistant and waterproof role Brush 2 to 3 times Every time about 3 hours Try to avoid collision after brushing the varnish 3 days The surface is dry 7 days The paint film reaches the best hardness

Suggestion: If the paint is thicker, you can add less than 10% of the water to dilute it

Use 120 grit coarse sandpaper to polish the damaged area, and rent a vertical filial piety to remove all the wood wax oil or paint on the solid wood.

Use 240 mesh fine sandpaper or finer sandpaper to polish until the hand is very delicate to the touch, and there are only small fine marks. It is best to sand along the wood grain.

You can wipe the dust with a damp towel and dry it naturally. Wipe off dust and dust.

Give the furniture an environmentally friendly water-based wood primer, water-based paint with water as a thinner, and there are few harmful substances in the manuscript, so after drying.

Water-based wood topcoat. Apply every 2-4 hours, each time the surface should be dry and placed in a ventilated place. If dust falls on it, beat it off with sandpaper.

<><How to renovate old wooden furniture?

1. Make preparations

1. Spread newspaper on the floor first, then open the doors and windows to ensure adequate ventilation. Place the wooden furniture to be painted on the newspaper. Before you begin, wear a mask and gloves. Suspicion.

2. Use a screwdriver to remove the hardware on the furniture. If you're going to paint a chest of drawers or dresser, remove the hardware on it before you begin. This has two advantages: one is to ensure that the paint is not brushed on the hardware; The second is to replace the hardware with new or complete painting.

3. Use glue joint agent (putty) to repair notched, holey, and dented notches. Use a putty scraper to scrape off any excess glue and allow the glue to dry.

4. Use sandpaper to polish the surface of the furniture. This is done to remove protective varnish or paint from the surface of wooden furniture, making it easier for the primer to adhere to the furniture. If there is an unevenness in the area where the grout is applied, it should also be sanded fully with sandpaper, so that the place where the grout is applied is flush with the rest of the furniture.

5. After sanding the surface of the furniture, use a clean coarse cloth to gently wipe it to remove the residue and make the surface of the furniture clean and tidy. If desired, you can use a mild detergent and then dry the surface of the furniture with a cloth.

2. Start priming and brushing

1. If you want the furniture to look uniform in color, apply a layer of primer. Gently apply a primer to the surface of the wooden furniture with a paint brush and roll with a roller. Paint brushes are used to brush edges, corners, and hard-to-reach areas; Roll a large, uniform area with a roller that does not have a wavy shape.

Wait for the primer to dry before painting.

2. After the primer is dry, polish the surface with a bucket of fine-grained sandpaper. Sanding with sandpaper allows the paint to adhere better to the primer.

3. Start painting, first with a roller, then with a paint brush. If possible, roll the evenly with a foam roller and then repaint it evenly with a paint brush. Pay special attention to which rollers can't be brushed, such as corners.

Wait for the paint to dry and check to see if there are any unpainted pins.

4. If necessary, brush another layer of paint. According to professional paint craftsmen, one layer of primer and paint is not enough to produce a professional effect, wait for the first coat to dry (preferably overnight, at least 6 hours), and then brush the same paint again with the above method.

5. Brush protective paint (optional). Once the paint is dry, apply varnish or sealant to avoid nicks and scratches. This also adds a slight sheen to the furniture.

6. Wait for the paint to dry and the painting work will be over!

Furniture After a long period of use, it will inevitably look more old or worn, discoloration and other phenomena, some people feel that it is a pity to throw away the old furniture, if the cost of replacing it is too high. All will choose to renovate old furniture, thenOld furniture refurbishedWhat are the steps? Let me explain it to you.

Steps to renovate old furniture

1. The steps of refurbishing old furniture - unpacking.

In order to maintain the integrity of the entire piece of furniture, the structure should be observed first when disassembled. After carefully observing the structure of the furniture, each part is marked with a serial number for installation after refurbishment, and the furniture should be disassembled in the reverse order when it was assembled. Be sure to maintain the integrity of the furniture, carefully disassemble it as little as possible to break the paint film and form new damage, and it is best not to use a planer.

2. The steps of refurbishing old furniture - cleaning.

You can use a high-power hair dryer to clean up the dust and accumulated soil on the old furniture, but you must not wipe it with a damp cloth, and wiping it with a damp cloth before you see the face of the parts itself will cause unpredictable damage. Some furniture parts also have adhesives such as cement slurry, chemical paint and other garbage, and these furniture parts must not be removed with chemical agents.

3. The steps of refurbishing old furniture - depainting.

When refurbishing old furniture, the old workpiece can be kept without painting. Furniture is generally lightly polished with fine sandpaper, and the harder parts can be scraped with a knife. Note that the original carved part can not be damaged when removing the paint, otherwise it will cause permanent damage, and it is useless to repair it.

4 Steps to renovate old furniture – ingredients.

When batching old furniture renovation, it is necessary to consider the processing requirements of the furniture and the bearing capacity of each part, and then batch it, requiring no cracks, no scars, and no decay.

5. The steps of refurbishing old furniture - polishing.

You can use an angle grinder to polish the paint surface of the old furniture, if the furniture is a thick tung paint surface, then you need to use a blowtorch to bake the paint surface and then polish it, and the thin paint surface can be directly treated with a scraper. For the polishing of old furniture, each part must be white in place, no dead corners can be left or paint and oil stains, and the color should be consistent. After sanding, the surface of the furniture should be hot, so that the finish will be very good.

6. Steps of old furniture renovation - assembly.

The old furniture is assembled with special glue powder, which must be assembled in accordance with the original furniture structure, the mortise and tenon structure of the furniture should be tight, and the diagonal of the frame should be symmetrical.

7. Steps to renovate old furniture - paint or decoration.

The last is to paint the old furniture, it is not to simply paint, but to try to retain the original paint surface of the furniture. The paint film of old furniture also needs to be polished, and if you want to have a good effect, you can use people to rub the furniture repeatedly. For the grinding of furniture paint surface, it is required that there should be no dead corners, no oil stains, and the color should be uniform.

I hope it will be helpful when you renovate your old furniture. It is recommended that when you choose paint for refurbished furniture, you should choose a product with the same properties as the original paint on the surface of the furniture, so as to avoid the phenomenon of chemical reaction between the two paints.