The sewing principle of the tribute needle machine and the use of the tribute needle machine?

The basic sewing principle of the bead edge machine or the tribute needle machine can be understood as:

1. The machine needle pierces the fabric with thread, hooks the thread from the lower hook thread, and keeps all the sewing threads below. (The needle goes down with the thread).

2. After the needle picks up and leaves the cloth, the feeding action forms the bead dots below. (The needle comes up wirelessly) 3. The needle pierces the fabric again. (needle goes down wirelessly).

4. With the cooperation of components such as bergamot and pendulum needle, the sewing thread is brought into the machine needle hook, and the machine needle brings the sewing thread to the fabric. (The needle comes up with a thread).

5. The needle is downward, and the thread hook hooks the thread. In this way, the bead machine is rotated 720 degrees by the spindle as a cycle, which can be divided into four steps, and the 5th step above is the preparation of the first step. Four steps to form a bead dot on the top and bottom.

The chain-type tribute needle machine comprises a working support and a machine, the machine is fixedly mounted on the surface of the working support, a driving motor is installed on the lower surface of the working support, the transmission shaft of the driving motor is connected with a flywheel through a belt, the flywheel is located on the right side of the machine, an electric control display screen is installed on the surface of the machine, a jumping rod is arranged on the upper surface of the left end of the machine, a needle clamp is arranged on the lower surface of the left end of the machine, the needle clamp comprises a first splint and a second splint, and a screw rod is arranged between the first splint and the second splint, The left and right ends of described screw rod are all screwed with clamping nuts, the left and right sides of described first splint and the first splint are all provided with limiting screws, and the limiting screw is positioned at the below of clamping nut, the bottom of described needle clamp is installed with organic needle, the left side of described needle is provided with hold-down plate, and the surface of described needle clamp is provided with lever. The device is simple in structure and practical.

Uses: high-end suits, coats, casual wear, professional wear, shirts, fashion, knitted clothing, bags and other cloth fabric products in the decorative imitation of hand-stitched sewing.

Features: With computer control system: sewing speed adjustment, needle length adjustment, bead size adjustment, bead point forward and negative adjustment, half needle adjustment.

Equipped with a needle protector. It will not break the needle when sewing at high speed or on thick fabrics and turns.

In addition to high-grade beaded threads, you can also use ordinary sewing threads of better quality to reduce the cost of threads. The crochet hook design makes it easy and convenient to insert the stitches into the crochet hook.

Automatic thread trimming and manual thread trimming device.

Independent pneumatic presser foot and knee presser foot.

For easy stitching, simply adjust the stitch tension knob and the release stitch tension handle.

It should be called an imitation hand-sewing bead edge machine, because it is particularly like a stitch sewn by a hand-sewing needle.

Tribute needle machine is a kind of national traditional knitting tool, mainly used for knitting fabrics and items of various shapes and textures or limbs. When knitting with a Gongtuan Shen needle machine, you need to place the knitting belt or knitting tool on the frame, and then adjust the knitting spacing and tension adjustment knob as needed. Next, wool or other weaving materials are woven into different patterns and patterns along the alternating positions of the hooks.

After that, gently lift the knitted fabric or belt and remove the knitted material from the hook.

In short, the tribute needle machine is mainly through different patterns and methods to weave a variety of distinctive national traditional fabrics and items. It should be noted that when using the tribute needle machine, it is necessary to pay attention to the reasonable setting of the tension and spacing of the hook and the material, so as to get a better knitting effect.

The basic sewing principle of the bead edge machine or the tribute needle machine can be understood as:

1. The machine needle pierces the fabric with thread, and the hook thread is opened by the lower hook thread, and all the sewing threads are kept below. (The needle goes down with the thread).

2. After the needle picks up and leaves the cloth, the feeding action forms the bead dots below. (The needle comes up wirelessly) 3. The needle pierces the fabric again. (needle goes down wirelessly).

4. With the cooperation of components such as bergamot and pendulum needle, the sewing thread is brought into the machine needle hook, and the machine needle brings the sewing thread to the top of the stove lifting fabric. (The needle comes up with a thread).

5. The needle is downward, and the thread hook hooks the thread. In this way, the bead machine is rotated 720 degrees by the spindle as a cycle, which can be divided into four steps, and the 5th step above is the preparation of the first step. Four steps to form a bead dot on the top and bottom.