What material is used to plug the leakage of the building platform

1. Methodological measures.

Owners can eliminate this phenomenon by painting waterproof paint on the interior walls to isolate the external moisture and then scraping putty.

2.Although this kind of method can not be the problem, but can be used for a temporary effect, the best way is to contact the relevant departments as soon as possible to solve the problem, from the source to eliminate water seepage.

3.In the process of damp removal, the best way is to redo the ground waterproofing project to effectively isolate the floor from the soil layer that produces moisture, so as to play a better role in moisture prevention. Otherwise, you can also choose high-quality wall paint when painting wall paint, and apply waterproof primer and topcoat at the same time, high-quality waterproof primer can sometimes play a moisture-proof role.

4 And you can reduce indoor humidity by not drying wet clothes indoors, turning on the dehumidification function of the air conditioner frequently, and opening windows for ventilation.

2. Accountability.

1.For commercial housing, the warranty period of the waterproof layer on the roof is 5 years, therefore, if the top floor of the purchased real estate leaks during the waterproof warranty period, it is the responsibility of the developer, and the developer has the obligation to repair it free of charge, and must contact the developer as soon as possible to ask them to repair it immediately to prevent the developer from delaying beyond the warranty period and causing them to bear the maintenance costs.

If the roof leaks during the warranty period, and the developer does not fulfill its obligations, then complain to the Consumer Association, the housing and construction department and the quality supervision department.

2.For commercial housing, if the roof leakage is caused by man-made damage, even within the warranty period, the developer is not obliged to give free repairs, even if they are willing to pay, the developer often will not give maintenance. In such a case, the only way to find a vandal to provide maintenance services, or to provide maintenance by the property and let the vandal bear the maintenance costs, the specific maintenance labor and costs can be decided with the vandal, if the other party refuses to compensate for the loss, go to the judicial route.

If the vandals are not found, only the owners of the entire building will have to share the cost of repairs.

3.For the goods, if the roof leaks after the warranty period, there is nothing to do with the developer, because the roof is shared by the public, it is the responsibility of all owners. If the water leakage is not serious, a small repair can be done, then all the owners will discuss the sharing of maintenance costs, and after reaching a consensus, they will collect money and find the property to repair it.

If the water leakage is serious, such as the roof is seriously cracked, then it needs to be overhauled, apply for overhaul first**, if you apply for it, then you don't have to bear the maintenance cost of the owner himself; If the application for repair** is not approved, then only the owner of the building will have to share the cost of the repair.

How to leak, the top leakage is paved with asphalt, there are large gaps and leaks with cement, and small gaps are covered with glass glue.

Summary. What should I do if the waterproof material blocks the floor drain Hello, dear! 1. Log dredging method:

First, insert a log with a diameter close to the drain into the water pipe, put a certain amount of water in the pool, and quickly pump the log up and down without interruption, and the dirt in the pipe will be washed away under the action of suction and pressure. 2. Soda and vinegar dredging method: first pour half a cup of cooked soda powder into the sewer, and then pour half a cup of vinegar, and the reaction between soda and vinegar can remove the sticky things in the pipe.

3. Dredging method: When the kitchen sewer is blocked, you can plug the hose into the sewer, and then put in a small amount of water, and constantly pump air into it, and the pipe can be dredged. 4. Use water pressure dredging method:

Take one with a diameter of 10

What should I do if the waterproof material blocks the floor drain Hello, dear! 1. Log dredging method: first insert a log with a diameter close to the drainage outlet into the water pipe, and put a certain amount of water in the pool, and quickly pump the log up and down without interruption, and the dirt in the pipeline will be washed away under the action of suction and pressure.

2. Soda and vinegar dredging method: first pour half a cup of cooked baking soda powder into the branch and return to the sewer, and then pour half a cup of vinegar, after the reaction between soda and vinegar, you can remove the sticky things in the pipe. 3. Dredging method:

When the kitchen drain is blocked, you can plug the hose into the drain, add a small amount of water, and constantly pump air into the pipe. 4. Use water pressure dredging method: take a stick with a diameter of 10

If it is said that the waterproof material is blocked, I have no good way to dredge quietly, I can only roll the blocked sewer, clean up the blockage, or make do with the use of the coarse, maybe it will often occur in the future. Zhizhen.

Summary. What should I do if the waterproof material plugs the floor drain, just open a hole. Find a good position, just disassemble it, and reinstall one, hoping that the pipe is not blocked.

Tear it down, if the floor drain doesn't get cement inside, it's okay, if it does, it's troublesome. If you can't find the right point, you can only dismantle the floor tiles and redo them; If you find it accurately, it is good to open a hole and install a floor drain, but you should pay attention to whether the flooding of the entire floor is not possible. After the waterproof is damaged, it is necessary to do it again.

Directly remove the floor tiles, clean up the residual cement in the pipeline, brush waterproof glue in the demolition and modification area, and plug the leakage. The rest is just done according to the normal steps.

What should I do if the waterproof material plugs the floor drain, just open a hole. Find a good position, just disassemble it, and reinstall one, hoping that the pipe will not be blocked and dismantled. Tear it down, if the floor drain doesn't get cement inside, it's okay, if it does, it's troublesome.

If you can't find the right point, you can only dismantle the floor tiles and redo them; If you find it accurately, open a hole to install the floor drain brigade cover, but pay attention to whether the flooding of the entire floor is not allowed. After the waterproof damage of the family ruler, it is necessary to do it again. Directly remove the floor tiles, clean up the residual cement in the pipeline, brush waterproof glue in the demolition and modification area, and plug the leakage.

The rest is just done according to the normal steps.

The waterproof material went into the pipe, and it solidified.

If the polyurethane waterproof coating has not been used, solvents such as xylene and trimethylbenzene can be used to dilute the one-component polyurethane or B-component polyurethane. If you can't buy it, you can try gasoline. Gasoline cannot dissolve the national standard polyurethane.

If polyurethane has been used and the film is formed, it cannot be dissolved, and the wheel can only be physically removed. The roof is waterproof, because the long-term wax chain is exposed to the harsh outdoor weather environment, so it is necessary to use materials with good weather resistance. Ouqi 911 polyurethane waterproof coating is composed of polyether, isocyanate and other polyurethane prepolymer A component and curing agent B component formed by a series of chemical reactions.

The lower floor has not been renovated yet, can you take it from the pipe?

If the polyurethane waterproof coating has not been used, solvents such as xylene and trimethylbenzene can be used to dilute the one-component polyurethane or B-component polyurethane. If you can't buy it, you can try gasoline. Gasoline cannot dissolve the national standard polyurethane.

If polyurethane has been used and the film is formed, it cannot be dissolved, and the wheel can only be physically removed. The roof is waterproof, because the long-term wax chain is exposed to the harsh outdoor weather environment, so it is necessary to use materials with good weather resistance. Ouqi 911 polyurethane waterproof coating is composed of polyether, isocyanate and other polyurethane prepolymer A component and curing agent B component formed by a series of chemical reactions.

The drain is plugged with waterproofing material, and the first thing we need to do is to find out the cause of the leak. Possible causes include a clogged fingerman, damage to critical components, broken pipes, or prolonged service. If it's just a simple blockage, we can try to remove it with a detergent.

However, if the cause is more severe, a more advanced approach is needed to resolve the issue.

Here are some updated ways to deal with the waterproofing material on the floor drain plug:

1.Clean the floor drain.

If you find that the leak is blocked, the first thing you can do is clean and remove the dirt. You can use a hook or brush to clean the filter of the floor drain and rinse it with clean water.

2.Replace the floor drain.

If cleaning the floor drain still does not solve the problem, then the floor drain may have been damaged and must be replaced. If you are not familiar with the method of installing a floor drain, it is best to ask a professional to replace it.

3.Corroded pipes.

If there is waterproof material on the bottom of the floor drain, the plug at the inlet may corrode due to the water being poured in for a long time, which may also cause the floor drain to clog. Here, we can offer two methods. One is to replace the entire floor drain, and the other is to find the problem and fix it.

Either method is used, it requires expertise and experience.

4.The waterproof material is too thick.

If the waterproofing material on the floor drain is too thick, it will also cause the water to not flow normally, which will lead to the blockage of the floor drain. At this time, we can take the method of scraping off the waterproof material.

In short, we must identify the problem before taking the appropriate approach to solve it. It is important to note that if you are inexperienced in this, do not carry out maintenance and repairs yourself to avoid causing more losses and dangers.