What to do if the wall tiles are pasted to the wall without soaking, 5

Unsoaked tiles are pasted on the wall, not strong, and will definitely fall off after a period of time, it is best to remove them and re-paste them, otherwise they will be troublesome in the future, but it is useless to sprinkle some water, and they must be soaked thoroughly.

How to deal with the wall tiles after soaking in water, sweep with a broom or mop with a mop. For the newly paved tile after being blistered, the problem that needs to be paid attention to is whether the expansion of the cement mortar on the back of the tile due to moisture absorption has caused the loosening of the tile, it is recommended to check the firmness of the tile that has been paved.

If there is a loose or hollow drum, it is best to replace the loose and hollow parts, if the firmness is relatively good, it will not have any impact on the later stage.

Summary. 1. It is not enough time for the tiles to soak in water.

2. The problem of sand and ash on the wall.

The construction process of ceramic tiles should be cleaned before tiling, such as lime plaster, latex paint, wallpaper and other decorations on the wall, or there is dirt on the ground, must be cleaned up, otherwise the cement mortar and the base layer are not firmly bonded.

In addition, if there are cracks in the wall itself, it should be properly treated before tiling, so as to avoid cracking or falling off the wall tiles due to the enlargement of the cracks in the basic structure in the future; In addition, for the ground and wall with too large a difference in flatness or verticality, cement mortar should be used for leveling. Before paving, compare the color difference of the tiles.

The soaking bricks are not empty on the wall, what is the reason for their own peeling after three years?

<> you're waiting a minute.

1. It is not enough time for the tiles to soak in water. 2. The problem of sand and ash on the wall. The construction process of ceramic tiles should be cleaned before tiling, such as lime plaster, latex paint, wallpaper and other decorations on the wall, or there is dirt on the ground, must be cleaned up, otherwise the cement mortar and the base layer are not firmly bonded.

In addition, if there are cracks in the wall itself, it should be properly treated before tiling, so as to avoid cracking or falling off the wall tiles due to the enlargement of the cracks in the structure of the basic stool in the future; In addition, for the ground and wall with too large a difference in flatness or verticality, cement mortar should be used for leveling. Before paving, the celery should also compare the color differences of the tiles.

<> you still have questions, please upgrade the service.

In our home decoration, the use of wall tiles is becoming more and more popular, which brings certain beauty and convenient maintenance characteristics to our home environment. The application of wall tiles is largely based on the application of floor tiles. After the wall tiles are pasted, they should be treated to ensure the beauty of the wall tiles and maintain their long-term use effect.

Next, let's take a look at what should be done with the wall surface after the wall tiles have been pasted.

1. Caulking treatment:

After the wall tiles are pasted, the cracks seem unavoidable. It is easy to hide dirt and dirt in the cracks, which will affect the hygiene and beauty of the house. Therefore, caulking is very necessary.

First of all, before filling, it is necessary to ensure the cleanliness of the joint, wash the gap with clean water, and then fill the gap with the grout. When the gap is full, use a scraper to smooth out any excess loose slurry. At least 24 hours after the gap is filled, have a damp sponge or damp cloth ready to wipe off any excess grout and clean it up.

2. Deal with the corners:

The corners of the walls are the trickiest part, where the tiles not only need to be caulked, but also protected. This is where the ground ash and sediment are concentrated, which can damage the tile and adversely affect its water resistance.

When dealing with corners, you need to protect them with corner strips. Corner strips are necessary not only to protect the corners, but also to serve as a decorative corner. The choice of corner strips should be consistent with the color of the wall tiles or close to the hail, and there should be no too much contrast.

3. Beautify the surface of wall tiles.

Different wall tiles have different surface treatments. Each surface requires different measures to give the full pie the appearance of its texture and surface texture.

For example, for periodic cleaning and maintenance, you can use some detergent to treat the surface of the wall tiles to keep them smooth and clean. Some surfaces can be treated with polishing and waxing coatings, similar to other stone treatments.

Regarding the treatment method after the wall tile is pasted, the above are some common methods. In general, the surface treatment of wall tiles should be considered before tiling, and the quality should be ensured to ensure the beauty and long-term use effect of wall tiles.