How to restore the messy Rubik s Cube? How to restore the scrambled Rubik s Cube?

Don't expect a formula to mess with the Rubik's Cube, the following method is the layer-first method, which is the introductory method, which is recognized as the easiest to learn, please click to view. I've seen people in their 60s learn this method in one day and do it in two minutes (two months later).

The average person can learn and restore the Rubik's Cube for the first time within 1 hour.

The first few times I didn't look at the formula were about 15 minutes.

It should be around 5 minutes in 3 days.

You can play for about 3 minutes in about 10 days.

In the future, if you stay for 1 and a half minutes for the longest time (about a month or two after playing), you can only play the technique, you can enter 1 minute, and you can enter 30 seconds to learn CFOP, and you are already a master.

It takes about 150 steps to restore with this method, assuming you take one step per second, and you estimate how long it will take to restore.

If you were lucky, you could make 3 turns a second and go in 40 seconds if you were fast.

The top domestic masters can play 10 revolutions per second when playing the handy formula, and the average is about 6 revolutions.

Well, I'll give you a **, that's what I learned on it.

I wish you to become a Rubik's Cube expert as soon as possible

Give you a professional Rubik's Cube**.

Learn the beginner first. If you use dim sum, you can increase the speed in 3 minutes in 10 days.

It turned out to be a senior.,The younger brother did his own ** tutorial.,Please refer to the seniors:

The shuffled Rubik's Cube reduction needs to rely on formula formulas, which are as follows:

First, make a white cross;

2nd, the first layer of formulas: right, up, right, up, right, right, up, up, right;

3rd, the second layer of formulas: right, up, right, up, right, up, up, right

4. The second layer of the formula is reversed: right inverse, upward inverse, right inverse, upward inverse, right inverse, upward shun, right shun, right shun, right shun;

The 5th and third level formulas: right order, upward order, right reversal, upward order, right order, upper order, upper order, right reversal.

The principle of the change number of the third-order Rubik's cube is as follows:

1. 8 corner blocks: the position can be swapped (8!) can also flip the direction (38), but you can't flip a corner block alone (1 3), so you have 8!37 variations.

2. 12 edges: interchangeable positions (12!) can also flip the direction (212), but you can't swap a pair of edges (1 2) alone, and you can't flip a pair of edges (1 2) alone, so you have 12!

212 2 2 ) variations.

3. 6 central blocks: fixed and immovable.

Where to go and where to turn backwards.

First use (up - right - right - up - right - up - up - forward - forward) rotation, and then use the formula (right reverse - upward - forward - forward - up - forward - front - right forward) from the cross, and then use the formula (right straight - up - right reverse - up - up - 180 ° - right - right - right) to make four corner blocks, and then use the formula (right straight - up - right reverse - up - right reverse - forward - right shun 18 ° - up reverse - right shun - right reverse - right reverse - forward reverse - four corners, and finally use the formula (right straight - Upward Reverse - Right Shun - Ascend Shun - Right Shun - Ascend Shun - Right Shun - Lower Reverse - Right Reverse - Upper Reverse - Right 180°) also centered. The formulas of the Rubik's Cube restoration include the top cross, the bottom edge homing, the bottom corner homing, the edge block homing, the top edge position, the top corner surface position, the top edge returning, and the top corner returning, which are the basic steps of the Rubik's Cube restoration. After mastering the seven-step reduction method of the third-order Rubik's cube, you can use the formula of quick twisting to restore, and the steps of quick twisting are (r u r' u'）（r' f）（r2 u' r' u'）（r u r' f'）、u z（u' r d'）（r2 u r' u' r2 u）z'（r u'）u’、（r u r'f'）（r u r'u'）（r'f r2 u'r'u'）、r2 u' r' u') r u r u ) r u' r )、r u r u2 ) r' l'u r u' l ) u2 r2 )。

The first three steps of the third-order Rubik's Cube speed twisting are to use the two edges in the upper right corner to bridge and restore the edges, and use the first three formulas to return the twelve edges. The next step is to use the upper left edge and the back edge to bridge and restore the Rubik's Cube.

The specific steps are as follows:

1. Hold the white block in the middle against the top.

2. Then make a white cross at the top, that is, the blocks of other colors are in the corresponding position, and then return the white corner blocks to their positions.

3. Then let the middle side block return to position, turn the white side downward, find the red and green edge blocks, if the red and green edge blocks are on the top layer, then rotate the top layer in a clockwise direction.

4. Then turn the Rubik's Cube according to the formula to make the side blocks return to their positions.

5. If the red and green edge blocks are in the middle layer, but the position is wrong or the color is wrong, you can first make the red and green edge blocks in the front right position.

6. Then follow one of the following orders again, rotate once to restore.

The reduction of the scrambled Rubik's Cube needs to rely on the formula formula, which is as follows: 1. Make a white cross; 2nd, the first layer of formulas: right, up, right, up, right, right, up, up, right; 3rd, the second layer of the formula:

Right Shun, Shang Shun, Right Shun, Shang Shun, Right Inverse, Upper Reverse, Right Inverse, Right Inverse, Right Inverse; 4. The second layer of the formula is reversed: right inverse, upward inverse, right inverse, upward inverse, right inverse, upward shun, right shun, right shun, right shun; The 5th and third level formulas: right order, upward order, right reversal, upward order, right order, upper order, upper order, right reversal.

Take the third-order Rubik's Cube.

1. Face the white block in the middle to the top, make a white cross at the top, that is, the blocks of other colors are in the corresponding position, and then return the white corner blocks to the position.

2. Return the middle layer of the side block, adjust the top layer of the side block upward, and make a yellow cross.

3. Adjust the yellow corner block to the cross, usually at this time, the color of the yellow block and the side will be misaligned.

4. Finally, adjust the color block on the edge to the corresponding position.

The Rubik's Cube can be restored according to the formula, and the reduction formula is as follows:

The first step is to make a white cross;

The second step, the first layer of formulas: right order, up order, right inverse, up order, right order, up order, up order, right inverse;

The third step and the second formula: right shun, upper shun, right shun, upper shun, right inverse, upper inverse, right inverse, right inverse, right inverse;

The fourth step, the second layer of the formula is reversed: right inverse, upward inverse, right inverse, upward inverse, right inverse, upward straight, right straight, right straight;

The fifth step and the third level formula: right order, up order, right inverse, up order, right order, right order, up order, right order.

If you want to restore the messed Rubik's Cube, you must first understand the formula of the Rubik's Cube, as long as you master the recipe of restoration, you can restore the Rubik's Cube in any state to its original state.

The specific restoration method of the Rubik's cube (taking the third-order Rubik's cube as an example):

1. Return to the bottom edge: choose a color surface as the bottom surface, make a cross at the bottom of the Rubik's cube, and then spell out a cross on each surface, first spell the first layer, and the cross must be correct, and the color of the four edges of the cross must be consistent with the color of the center block on the front and back.

2. Return to the bottom corner: restore the four corner blocks of the first layer of the Rubik's Cube.

3. The second layer of edges is in place: restore the four edges in the middle layer of the Rubik's Cube.

4. Top edge position: At this time, it depends on what the situation of the Rubik's Cube in the hand is, if it is a "point", after doing the action step of the top edge position, it is a "small turn", and the top layer should be adjusted to the correct direction, and then do the action step of the top edge position, and so on, until the top layer of color is restored to a cross.

5. Top corner position: make the top surface color of the four top corners of the Rubik's Cube all adjusted to the top surface.

6. The top edge is in place: make the color of the other side of the four top edges of the Rubik's cube the same color as the color of the other four sides where it is located.

7. Apex corner homing: make the other two sides of the four top corners of the Rubik's Cube that have been faceted in the same color as the color where the corresponding face is located. After the whole adjustment is made, you will find that the Rubik's Cube has been restored.

The bottom edge is in place, choose the white side as the bottom surface, and set a cross on the bottom layer of the Rubik's Cube. The reduction edge is to spell out a cross on each face. Pay back one layer first, that is, make a cross on one side. The color of the four sides of the cross must be the same as the color of the center block on the front, back, left, and right.

2.Bottom corner homing.

Restore the four corner blocks on the first floor of the Rubik's Cube.

3.The second layer of edges is homecoming.

Restore the four edges in the middle layer of the Rubik's Cube.

4.Top edge bit.

It depends on the condition of the Rubik's Cube in your hand, such as the "point": after this action is done, it is a "small turn", then you need to adjust the top layer to the correct direction and then do this step, and so on, until the top layer of yellow is restored to a cross.

How do you ask questions? White cross.

Adjust the top color of the four top corners of the Rubik's Cube to the top surface.

6.The apex is in place.

Make the color of the other side of the four top edges of the Rubik's cube the same color as the color of the other four faces in which it is located.

7.Top corner homing.

The other two sides of the four corners of the cube that have been placed are also the same color as the corresponding faces. Questions!

Magic Revealed: Teach you how to restore a Rubik's cube in an instant, and learn this magic trick in 30 seconds.

There are many restoration methods for the third-order Rubik's Cube, among which the "layer-first method" is the most suitable method for beginners to master. A third-order Rubik's Cube, "from top to bottom", we can understand it as "top", "middle", and "bottom", and the so-called "layer-first method" is to restore layer by layer. The third-order Rubik's Cube "layer first method" is restored, which is divided into the following six stages:

The first stage: the top layer of the cross, restore the top layer of the edge. Phase 2:

Restore the top corner block. The third stage: restore the middle layer of the edges.

The fourth stage: the bottom layer of the cross, restore the bottom edge. Fifth Order Bizha Section:

Flip the bottom corner block to align the bottom color. Stage 6: Adjust the position of the bottom corner block and complete the restoration.