How to set the password before the computer starts, how to break the password

1. How to set the BIOS boot password (award):

Step 1 Start the computer and press the [del] button to enter the main BIOS settings interface.

Step 2 In the BIOS main menu, there are two options to set a password, they are "Set Supervisor Password" and "Set User Password".

Step 3 Select one of them and press enter, enter the password when the Enter Password dialog box appears. If you are setting this for the first time, enter the password should not exceed 8 characters, and note that this password is case-sensitive. When typing, the screen will not display the entered password, press the [Enter] key after entering.

Step 4 Immediately after that, the confirm password dialog box appears, enter the same password again (note: the original intention of this item is to verify the password just entered, if the password entered twice is inconsistent, you will be asked to re-enter it).

Step 5 Then in the BIOS main menu, select the "Advanced BIOS Features" item, select the "Security Option" item with the cursor key, and use the [Page Up Page Down] key on the keyboard to change the option to System.

2. How to set the system boot password:

If it's an XP or 2000 system.

Start at the interface point Set the user and password for the Control Panel.

2000 system to press the inside to use the machine, the user must enter...

If it is 98, press the "DEL" key (some original buttons may be different) to enter the CMOS settings, move the "BIOSFEATURESSETUP" with the arrow keys, and set the "SecurityOption" to "Always". Then press the esc key to exit this sub-option, move to "userpassword", enter a set of passwords, enter "y", then you will be asked to enter the same password again, and finally enter "y". Then exit the CMOS settings, reboot before entering Windows will ask you to enter the password you just set, enter the correct password to boot up.

Please see the details. In addition, some motherboard settings will be slightly different.

Resources.

The above is the method of setting, I have a way to crack it here Use debug to test into a system floppy disk, start with a floppy disk, run debug, enter the following **:

o 70 71

o 71 70

Q Restart the computer and the password will be cleared

Then setting a password for computer boot is the best way. How do I set a boot password? It's all set up in just a few steps!

Here is a demonstration of how to set the boot password of the XP system and the Win7 system.

XP System Approach:

Step 1: Click Start in the lower left corner and select Control Panel (some can right-click on My Computer).

Step 2 and then select User Account.

Step 3: If you don't have a password, you need to set the administrator's administrator password! It is also possible to create a new account.

Step 4 and then select Create Password.

Step 5: Then enter the password you want to set.

Step 6 and finally click Create Password. The password is set successfully.

Win7 system:

The first step, Win7 system and XO system are also similar'Method. Open the Start Menu button. Then click on Control Panel.

Step 2 and Next. In the control panel we find the user account link. Click enter to set the boot password.

Step 3: If you don't create a boot password! Come in and create a password for your account!

Step 4: Enter the password, so there is no need to say much here. Enter a password that you can remember.

Step 5: If you have already set it, we can also change the boot password here.

Step 6, and then after booting the system, you will be shown to enter the password.

I don't want others to look at my computer privately, but there are still some nasty ghosts who like to get other people's privacy the most. What can I do? Nowadays, we have some privacy and important files in our computers, and many people also think of setting a computer boot password, but the specific method is not clear.

In response to this problem, take win10 as an example to teach you how to set the computer boot password.

The boot password means that we can only enter the system after opening the computer after entering the correct password, which is usually composed of numbers and letters, which can protect our privacy. If you want to set a password for your computer, let's take a look at the specific steps below.

How to set the computer boot password-1

Set win10 boot password diagram-2

2. Find the button of the user account in the control panel and click to enter the next step.

Set win10 boot password diagram-3

3. On the account page, there is an entry under the words "Change Account Information" is "Change my account information in computer settings", click to open.

How to set the computer boot password Figure -4

4. Find the content of the login option on the left side and click to open.

Set win10 boot password diagram-5

5、There is a password below the right side of the login,Here if you are setting it for the first time, then it is displayed as "Add",If you have set the login password before,Then it is changed。 I've already set it up, so it's a change.

Set the computer boot password diagram-6

The above is how to set the computer boot password, I hope it can help you.

Win7 and XP are in the Start Menu, Control Panel, User Account, and then set a password.

Go to the Control Panel --- user account --- password settings.

Open the Control Panel and then there is the account user.

Click on the control panel inside the start, there is a user account in it, click on it, and set a password.

Win7 system:

Step 1: Open the Start Menu button and click on Control Panel.

Step 2: Next, in the control panel, we find the user account connection, click to enter to set the boot password.

Step 3: If you don't have a boot password, you can create a password for your account!

Step 4: Enter the password, there is no need to say much here, enter the password that you can remember.

Step 5: If the password has been set, we can also change the boot password in it.

Step 6, and then after booting the system, the password entry interface will appear.

Win10 system:

Step 1: Click the win button to open the settings option on the left.

Step 2: Find "Account Information" in the settings option and click to enter.

Step 3: Select the login option and you will see the PIN and password options.

Fourth, select the password option, if you have not set a password, you will be prompted to set a new password, and if you have set a password, you can change the password.

The above is about win7 and win10 system how to set the computer boot password method, friends who have not yet set it can refer to it.

How to set the boot password on the computer.

In this case, set the computer's boot password, turn on the computer, click Start on the left side of the taskbar, click Control Panel, click User Accounts & Family Safety, and then set the boot password here.