Do I need to clean my new refrigerator and clean my new refrigerator?

Problems to pay attention to when buying a new refrigerator.

First of all, pay attention to whether the position of the refrigerator is reasonable and whether it is convenient for the refrigerator to dissipate heat. It is also necessary to check the power supply of the home, whether it is grounded, and whether it is a dedicated line.

Second, before use, the user should carefully read the attached product manual and check the various parts of the refrigerator. The power supply used in household refrigerators is mostly 220V, 50Hz single-phase AC power supply, when working normally, the voltage fluctuation is allowed between 187-242V, if the fluctuation is large or high and low, it will affect the normal operation of the compressor, and even burn the compressor.

Third, the refrigerator should use a single-phase three-pin socket and be wired separately. Pay attention to protect the insulation layer of the power cord, do not overpressure the wire, and do not change or lengthen the power cord at will.

Fourth, after checking that it is correct, the refrigerator should be left to stand for 2 to 6 hours before turning on to avoid oil circuit failure (refrigerator after handling). After the power is turned on, listen carefully to whether the sound of the compressor is normal when starting and running, whether there is the sound of the pipes hitting each other, if the noise is too loud, check whether the product is placed smoothly, whether the pipelines are in contact, and make corresponding adjustments. If there is a loud abnormal sound, the power should be cut off immediately and a professional repairer should be contacted.

Fifth, it is necessary to run with a reduced load at the beginning of use, because there is a running-in process for the moving parts of the new machine. After running for a period of time, add a large amount to prolong the life of the refrigerator.

Sixth, when using the refrigerator for the first time, you should not store too much food, and leave appropriate space to keep the cold air circulating, and try to avoid the refrigerator working at full capacity for a long time. Hot food should be cooled to room temperature before putting it in to avoid the refrigerator not being shut down for a long time. Food should be sealed in a plastic bag or plastic wrap or put in an airtight container, which can prevent food from being damp, dehydrated, and smelly.

Foods with water should be removed from the water and placed to avoid excessive frost due to the evaporation of a large amount of water. Note that liquids and glassware should not be placed in the freezer to prevent frost cracking damage. Do not put volatile, flammable chemicals, corrosive acids and alkalis to avoid damaging the refrigerator.

We should pay attention to the above points during use, and I believe that your refrigerator will be more durable.

Five taboos for cleaning the refrigerator.

The refrigerator must be kept clean and dry, and the following points should be paid attention to when cleaning and sanitation of the refrigerator

Do not scrub the refrigerator with acid or alkali solutions.

Do not scrub the box with organic solvents.

Do not scrub the refrigerator with hot water.

Do not rinse the outer shell and inner tank of the refrigerator with water.

Do not scrape off dirt with a sharp object.

Therefore, when cleaning the refrigerator, the shell and inner tank of the refrigerator should be scrubbed with a soft cloth dipped in warm water or neutral detergent (such as soapy water), and the dust on the condenser should be removed with a soft brush, or a vacuum cleaner can be used to vacuum the dust. If there is too much dirt on the box, you can use a towel to stick toothpaste or laundry detergent and wipe it off with water. After the cleaning work is completed, wait for the refrigerator to be completely dry before putting in the food to energize it to start working.

Tips for deodorizing your refrigerator.

Wipe the inside of the box with a soft cloth, then put in half a glass of liquor and close the refrigerator door, and the odor can be eliminated after 24-28 hours. It can also be deodorized with activated carbon or deodorant.

Do you need to clean <> new refrigerator when you buy it: Yes. 1. The newly bought refrigerator can be wiped clean with clean water.

2. If you are not at ease with only water, you can use potassium permanganate aqueous solution to clean it, which can play a better role in sterilization. 3. After washing, let the box dry before use, too wet is not good for the stored food, and the food can be stored after the power is on.

This answer applies to most brands of refrigerator models such as Gree, Midea, Haier, etc.

<> needed. The inside of the newly bought refrigerator can be gently wiped clean with clean water, the sealing strip of the refrigerator can be scrubbed with alcohol or vinegar water, and after cleaning, the door will be opened and left empty for about half a day without plugging, so that the air in the refrigerator can circulate, and then it can be used.

<> new refrigerator to be cleaned. Cleaning method: 1. Pour an appropriate amount of white vinegar into the container.

2. After wetting the rag, wipe the inside of the refrigerator. 3. After the internal wiping is completed, the external dust can be wiped clean as needed. 4. After completion, open the refrigerator and dry it until the white vinegar water evaporates, and then it can be plugged in.

This answer is applicable to most brands of refrigerator models such as Rongsheng, Midea, and Haier.

Newly bought refrigerators are recommended to be cleaned, mainly due to long-term sealing, lack of air circulation, and the smell of plastic and the refrigerator material itself.

The main ways to clean a new refrigerator are:

1. Clean the inside of the new refrigerator, open the door and leave it empty for about half a day without plugging in, so that the air in the refrigerator can circulate.

2. The empty machine runs for about 3 hours, so that the air in the closed refrigerator can be circulated inside and outside.

3. Some activated carbon wrapped in paper can adsorb peculiar smells, effectively adsorb free chlorine, phenol, sulfur and other organic pollutants in water, and purify and remove impurities. It can also be used for gas purification, gas separation, air drying, food preservation, and the product has more functions such as decolorization, deodorization, deodorization, purification, and so on.

4. Fresh grapefruit peel and orange peel can also make the air in the refrigerator fresher for a period of time.

Maintenance of the refrigerator.

1. Frequently clean the dust on the back or bottom of the refrigerator condenser and compressor. Dust can be removed using a vacuum cleaner or brush. Be careful not to use a damp cloth to wipe dust off the refrigerator and compressor.

2. When the refrigerator is out of use for a long time, the power should be cut off first, all the food in the box should be taken out, the inside and outside of the box should be cleaned up, and the door of the box should be opened for several days to fully dry the box and dissipate the odor in the refrigerator.

3. Check the drain pipe. If the drain is clogged, the water will leak into the refrigerator. Poke the drain pipe with wire to remove the build-up on the drain.

4. Don't ignore the cleaning of the door seal strip, dilute the bleach with 10 times the water, moisten it with a toothbrush, and finally wash the bleach with water. The rubber strip is dirty and easy to age, which will affect the sealing of the refrigerator and increase power consumption.

5. Check the vibration, noise and temperature of the compressor. When touching the compressor shell during operation, there should be no obvious vibration, and the sound of the compressor starting should not be heard during the day.

6. Pay attention to check whether there are cracks in the power line to prevent leakage.

7. Clean and dry the inside and outside of the refrigerator with warm water or neutral detergent, and open the refrigerator door to ventilate and dry for a day.

1. The new refrigerator needs to stand for 2-4 hours.

The compressor to ensure the normal operation of the refrigerator needs some lubricating oil protection, but the refrigerator must be vibrating during transportation, at this time, the lubricating oil of the refrigerator compressor flows into other places, once the power is used, it is inevitable that there will be a failure, so, for the sake of safety, let it stand for a few hours. In addition, during the standing process of the refrigerator, all the doors and drawers of the refrigerator can be opened, ventilated and deodorized, and wiped with a damp rag with light salt water or alkaline water to sterilize, and then it can be officially powered on.

2. Refrigerator location.

First of all, dry and ventilated, no direct sunlight, secondly, the ground should be flat, and finally, the distance from the wall should be more than 10cm, all for the convenience of heat dissipation. The new machine has just arrived, and it is necessary to give it a run-in process and adapt to the process first. It is best to reach the set temperature before putting food in the refrigerator after it is shut down, which is also to ensure that the workload of the refrigerator is not increased.

3. Socket for the new refrigerator.

The circuit problem is the most important place to pay attention to, although the refrigerator is an electrical appliance, but it is different from the general electrical appliances, the current is very large when starting, is 5-10 times that of normal operation, if this time also shares a socket with other electrical appliances, not only the refrigerator is uncomfortable, the socket can not stand it, the result is that the socket is selected short circuit.