What parameters should be looked at when purchasing a multi tank ultrasonic cleaner?

1. The volume of the ultrasonic cleaning tank.

Before purchasing a multi-tank ultrasonic cleaner, customers need to understand the volume and size of the cleaning tank of the cleaning machine. Because the consignment of the washing tank volume determines whether the customer's workpiece can be cleaned normally, if the size is not suitable, then it may cause the situation that it cannot be put down, or the remaining space of the washing tank is too large. Therefore, when purchasing, it is necessary to choose the appropriate washing tank volume according to the size of the workpiece, in addition, it should be noted that the volume cannot be calculated just right, especially the standard multi-tank ultrasonic cleaning machine, because the cleaning tanks are stamping tanks, and the corners are rounded, so a slightly larger volume than the workpiece should be selected.

2. Ultrasonic frequency.

Secondly, you need to look at the frequency of the multi-tank ultrasonic cleaner. Generally speaking, the more general frequency is suitable for the cleaning of hardware, circuit boards, beakers, jewelry, plexiglass and other workpieces. However, some special workpieces require a lower or higher frequency, so the ultrasonic frequency should be selected according to the needs of the workpiece.

In addition, the lower the ultrasonic frequency, the more extensive the degree of cleaning, but the stronger the force, the higher the frequency, the more delicate the force, the weaker the force.

3. Power of the cleaning machine.

When purchasing, it is also necessary to look at the power of the multi-tank ultrasonic cleaner, the greater the power, the more vibrating heads can drive, so customers should choose the appropriate power according to the cleaning effect brought by the vibrating head.

The above are the parameters that customers need to pay attention to when purchasing multi-tank ultrasonic cleaners, which are related to the cleaning effect of multi-tank ultrasonic cleaners, so customers should not only understand more about some characteristics of the cleaning machine, but also understand more about the characteristics of the workpiece to be cleaned, so as to buy the most suitable multi-tank ultrasonic cleaner.

The multi-tank ultrasonic cleaning machine is mostly combined with spraying, bubbling, drying and other cleaning methods to form a semi-automatic ultrasonic cleaning line, which has the characteristics of fast cleaning speed, large cleaning quantity and long working time. The parameters that need to be looked at when purchasing a multi-tank ultrasonic cleaner are: ultrasonic frequency, ultrasonic tank volume, ultrasonic power, inner tank size, and cleaning process.

Jiangsu Jiujiu Jiayi Ultrasonic Technology **** will answer for you: enterprises will pay attention to the problem when purchasing ultrasonic cleaning equipment But in fact, in addition to **, there are many factors to consider, and the following parameters are to pay attention to when purchasing ultrasonic cleaning equipment.

1. Power density.

The higher the power density, the better the cleaning effect and the faster the cleaning speed.

2. Cleaning temperature.

When choosing ultrasonic cleaning equipment, you should ask about the cleaning temperature of each model, and the suitable cleaning temperature of different equipment is different. Control the temperature as required to wash more thoroughly.

3. Size. There are large ultrasonic cleaning equipment on the market, as well as small ones. The equipment used in industry is generally larger, but it is for ordinary daily use, so the body size will be small. Be sure to choose according to actual needs, choosing the wrong one will only waste resources.

Therefore, if there is a demand for ultrasonic cleaning equipment, then you may wish to refer to the above points when making a purchase, so as to choose the right one.

The ultrasonic cleaner is mainly composed of two parts: the ultrasonic cleaning tank and the ultrasonic generator. The ultrasonic cleaning tank is made of high-quality stainless steel with strong elasticity and corrosion resistance, and the bottom of the ultrasonic cleaning machine is equipped with an ultrasonic transducer oscillator; The ultrasonic generator generates high frequency and high pressure, which is conducted to the transducer through the cable connection line, and the transducer and the vibrating plate together generate high-frequency resonance, so that the solvent in the cleaning tank is cleaned by ultrasonic action.

Summary. The multi-tank ultrasonic cleaning machine used for the cleaning of small batches of electronic circuit boards, jewelry, glasses frames, glassware, semiconductor silicon wafers, etc., adopts municipal water, pure water, alkaline or weakly acidic, and water-based solvents as cleaning agents, and is mostly combined with spray, jet, hot soaking, bubbling and other cleaning methods, with suitable product drying methods, to form a semi-automatic ultrasonic cleaning production line. It is especially suitable for the cleaning of small batches of electronic circuit boards, electronic parts, clock parts, metal stamping parts, metal machining parts, jewelry, glasses frames, glassware, semiconductor silicon wafers, etc.

It has the characteristics of unique technology, strong pertinence, simple structure, easy to use, etc., and the equipment cost is low, the investment is low, and it can meet the special cleaning requirements of different products.

The multi-tank ultrasonic cleaning machine used for the cleaning of small batches of electronic circuit boards, jewelry, glasses frames, glassware, semiconductor silicon wafers, etc., adopts municipal water, pure water, alkaline or weakly acidic, and water-based solvents as cleaning agents, and is mostly combined with spray, jet, hot soaking, bubbling and other cleaning methods, with suitable product drying methods, to form a semi-automatic ultrasonic cleaning production line. It is especially suitable for the cleaning of small batches of electronic circuit boards, electronic parts, clock parts, metal stamping parts, metal machining parts, jewelry, glasses frames, glassware, semiconductor silicon wafers, etc. It has the characteristics of unique technology, strong pertinence, simple structure, easy to use, etc., and the equipment cost is low, the investment is low, and it can meet the special cleaning requirements of different products.

The ultrawave cleaning machine is mainly composed of two parts: ultrasonic cleaning tank and ultrasonic generator. The ultrasonic cleaning tank is made of high-quality stainless steel with strong elasticity and corrosion resistance, and an ultrasonic transducer oscillator is installed at the bottom; The ultrasonic generator generates high frequency and high pressure, which is conducted to the transducer through the cable connection line, and the transducer and the vibrating plate together generate high-frequency resonance, so that the solvent in the cleaning tank is cleaned by ultrasonic action.