What should I do if my Huawei watch doesn t light up?

The Huawei watch doesn't light up when you raise your wrist. You can reset it. Lift your wrist like that, turn it off and restart it.

If you can go to the mobile phone store to change it, then you can do without it, if you want to, you can also go to Pinduoduo to search for the Huawei watch table to play, and then he will give you something that is not bright.

The watch does not light up because the reaction is delayed, or the watch changes the action of raising the wrist, which is not very good and can be positioned. So if this happens, we can factory reset the watch.

If the Huawei watch, his hand, if it doesn't light up, he is likely to have a problem, and he will lift the hand after the transportation mounting, and then it will light up.

Huawei's watch doesn't light up. In this case, we can try to factory reset the Huawei watch, and then re-set the relevant settings, and the problem can be solved.

It should be a poor contact, and it needs to be repaired at a maintenance point, and it is not lit due to the wrong position.

If it doesn't light up, it may be a problem with his internal proximity, you can go to repair it first, or open the settings there.

You can go to the repair shop to check if the battery is dead, if so, then you need to replace the battery to use normally.

Let's see if there's a problem with your settings? If it's not a problem with your settings, then there's a problem with the recognizer on your Huawei Watch that needs to be replaced.

Is there no power, so it doesn't light up, and it may be that there is a fault inside, so I suggest you charge it first.

What should I do if my Huawei watch doesn't light up in Taiwan? You can try to restore the factory settings, if it doesn't work, it's best to go back to the factory for repair.

Huawei's after-sales service is still very good, if your watch is still under warranty, it is recommended that you find Huawei after-sales service to repair it for you, I didn't see the real thing, and netizens can't help you.

What should I do if Huawei's watch Taiwan doesn't light up? That may be because its battery is not there, and it doesn't light up, which means that it can't be used after the repair, because it's a battery.

The Huawei watch doesn't light up because there is a problem with the distance from the arm, and the general watch relies on induction.

What should I do if the watch is not lit up in Taiwan? It seems that the watch is too bright, and if it doesn't light up, go to the Huawei market for a walk, and then the receiver will meet me, right?

This may not be very sensitive, or it may take a long time.

If this happens, it is likely that some of its resistors are faulty, and in this case, it is very likely that the display circuit is faulty.

This is estimated to be the day after tomorrow to charge it first, or to see what is wrong.

Before looking at the watch, did the watch never see the light in the sleeve? If it is, it's normal, no problem, you can see the specific explanation in the manual, I won't explain.

The Huawei watch does not light up when the wrist is raised, and there may be the following reasons for Lu Ji's accompaniment:

1.*The watch is not set correctly, resulting in the wrist raising not lighting function being turned off. Swipe up on the watch interface, find the "Settings" option, enter the "System" menu, and check whether the "Raise your wrist to turn on the screen" switch is on, if it is off, turn on the switch.

2 Watch battery runs out, please. Check the remaining capacity of the watch battery.

3.The firmware version of the watch is too low, please perform a firmware upgrade or factory reset, check if you can install the new system upgrade version in the settings of the watch in hand, if you can install the new system upgrade version, please install the upgrade immediately.

4.The watch sensor is malfunctioning and cannot sense the wrist lift normally.

5.The connection between the watch and the phone is disconnected, you can try to rebind the watch so that the phone can be reconnected.

If none of the above methods solve the problem, you can contact official customer service or go to the nearest Huawei authorized repair center for repair. If you have further questions about the Huawei Watch, it is recommended that you consult the official customer service.

The information of the Huawei watch not lighting up can be caused by a variety of reasons, here are some possible reasons and solutions:1Bright screen settings:

The watch screen standby power saving mode may be set in the settings, causing the message to not light up. You need to go to "Settings" - "Standby Display" settings to set options such as "Show Text Notification" and "Do Not Disturb Mode" to ensure that text notifications and Do Not Disturb mode are not enabled. 2.

Notification permissions: The HUAWEI Watch needs to enable the notification permission to display information normally, and you need to go to Settings > Apps & Permissions > App Permissions on the phone connected to the watch and turn on the notification permissions for the apps you want. 3.

Watch system problem: If none of the above methods can solve the problem, there may be a problem with the watch system and you need to restart or restore factory settings. 4.

Other Causes: There are some other possible reasons such as low battery, unstable Bluetooth connection, etc., which may also cause the message to not light up. If you still can't solve the problem, it is recommended to consult Huawei customer service or go to a professional repair point for inspection and repair.

To turn off Do Not Disturb Mode or Do Not Disturb Period, you can swipe down on the watch face interface to open the shortcut menu and turn off the Do Not Disturb switch; Or touch Settings >Do Not Disturb to turn off Do Not Disturb or Do Not Disturb hours, or open device settings on the device page of the Huawei Health app and turn off Do Not Disturb. 3.The button exits the sleep state, and the wrist is not supported to turn on the screen during sleep, so as to avoid frequent accidental screen turning on and affecting your sleep.

When you just wake up, the bracelet has not yet exited sleep mode, and the wrist lift screen is not available at this time, please click the button on the side of the core bracelet or the virtual button of the bracelet to exit the sleep mode, and then use the wrist lift screen function. 4.Restore factory settingsPlease try to restore the device to the factory settings to see if it returns to normal, the factory reset will clear the data on the device side, please synchronize the data to the cloud before resetting the factory settings.

If the problem persists after attempting the above methods, bring the relevant proof of purchase to the nearest Huawei Customer Service Center for testing.

Summary. Raising the wrist to turn on the screen requires the hand flip action to reach a certain angle, try to increase the flip amplitude; Use the HUAWEI Wear app on your phone to check whether Do Not Disturb Mode is enabled on your watch, and then remove the mode to restore the screen when you raise your wrist. During sleep, the watch enters the [Sleep State], and the function of raising the wrist to turn on the screen will be automatically suspended, and the user can resume raising the wrist to turn on the screen by discharging the [Sleep State] after waking up. Here's a closer look:

Raising the wrist to turn on the screen requires the hand flip action to reach a slag fixed angle, and try to increase the flip amplitude; Use the HUAWEI Wear app on your phone to check whether Do Not Disturb Mode is enabled on your watch, and then you can restore the screen when you lift your wrist and turn on the screen. During sleep, the watch enters the [sleep state], and the function of raising the wrist to turn on the screen will be automatically suspended, and the user can resume raising the wrist and the screen after waking up. Here's a closer look:

Try to turn the bracelet inward to the position facing the face, and it takes a certain angle to raise the wrist or turn the wrist to turn on the screen; 2. Check whether the [Do Not Trace Rush Mode] is enabled on the Huawei Wear app, and turn it off if it is turned on. 3. If you have just woken up from sleep, please walk around a few steps to make the bracelet exit the [sleep state], and then try to raise the wrist to turn on the screen function.

Hope mine is helpful to you, thank you for trusting.