The bathroom decoration floor is higher than the living room, what should I do?

Introduction: Everyone's home renovation style.

It's not the same, at this time the bathroom decoration you will find that the ground is higher than the living room, what should you do at this time? Let's find out.

1. What should I do if the bathroom decoration floor is higher than the living room?

We can know that the floor between the bathroom and the living room is not generally high, which may not look good at this time, and the general bathroom is higher than the floor of the living room.

There is a situation, first of all, the bathroom may have some high floors, that is, the blank room.

That's how it was designed. There is also a situation that the decoration design may not have a sense of co-ordination, at this time the ground may be higher than the living room after the decoration, so we can reduce this height a little when decorating, and make up for it in other ways. So at this time, we should understand that when the floor of the bathroom may be compared, we will flatten it on the extra ground and install some non-slip tiles, so that the paving can make its threshold relatively low, and do not design particularly prominent, between the bathroom and the living room, if it has a low threshold, we can also design it through some ways and methods.

2. Scientific design

We can also know that when some floors of the living room are relatively high, it may be a problem with the foundation, at this time we must know how to paste some tiles to thicken, and paste the tiles in the living room a little thicker, at this time you can level the height between them, so the floor of the living room should be higher than the bathroom, so that you can, otherwise some water leakage may be unhygienic. So through some methods to keep its final ground balanced or the living room should be higher than the bathroom, do not let the bathroom high into the living room, this method is unscientific, and there will be some inconvenience in life, so the flatness of the ground is very critical, we have to through some decoration design the day after tomorrow, his ground is flattened.

One can be transformed, redecorated, shoveled off the floor of the bathroom and reinstalled, and the other is to do a good job of blocking water at the base of the door rail, to ensure that the drainage floor drain of the bathroom is complete, and do not let the water in the wet area of the bathroom leak into the living room.

You can add some bricks to the door of the bathroom, and you can also decorate the bathroom door, so that you can prevent the water from overflowing in the bathroom.

At this time, you can choose to sink the countertop of the bathroom, or you can choose to raise the countertop of the living room to avoid water leakage.

If the bathroom floor is high, the water will flow turbulently, the bathroom is the place where people wash, and it is also the place with the most water, if the bathroom floor is high, the water will flow out of the bathroom and stay in the living room, affecting the health of the home, and there will be certain safety hazards. It may also have an impact on the downstairs and cause unnecessary trouble.

Wooden planks can be used to separate the bathroom from the living room so that water does not flow into the living room.

If the decoration floor of the bathroom is higher than that of the living room, you can make the bathroom floor a gentle slope on both sides, which can effectively prevent water from flowing out.

The bathroom decoration floor is higher than the living room, how to solve this problem? In order to avoid the water on the toilet floor from rushing to the outdoors, the road surface of the general toilet will be about 20 30 cm lower than the road surface on both sides of the toilet, but some people do not control the road height difference in the whole process of indoor decoration, which causes the toilet decoration road surface to be higher than that of the large living room.

That can be used to keep water out.

1. How to prevent the floor of the bathroom from being higher than the living room?

In order to better prevent the floor of the bathroom from being higher than the large living room, first in the whole process of the construction of the main structure, it is necessary to adjust the height difference between the structural pavement of the bathroom and the structural pavement of other houses according to the template under the weaving concrete floor slab, generally speaking, the pavement of the bathroom should be three centimeters lower than the pavement of other houses, and the other in the whole process of interior decoration, it is also stipulated that the construction team will carry out an overall leveling of all the rooms in the room, and it is best to vacate a one-meter control line. This kind of manipulation of the final successful floor height and width ratio of the restroom, and then can achieve the practical effect of being smaller than that of other rooms.

2. What should I do if the bathroom floor is higher than the living room before the renovation of the new house?

If you find that the bathroom floor is higher than the large living room before the house is renovated, it is easier to deal with it than after the interior decoration, for example, we can deal with the problem of road height difference through interior decoration, and we can use floor tiles to deal with it.

The thickness of the combined layer is used to solve this problem, for example, in the case of laying the floor tiles in the bathroom, you can pave a thickness of two centimeters or paste a thickness of less than two centimeters, and in the case of wall tiles of other rooms, you can also use a mixed mortar binding layer to ensure that it is around 5 centimeters, so that the total area of the large living room can be higher than that of the bathroom. In addition, you can make a concrete water retaining platform at the door of the bathroom, that is, pour a layer of concrete at the door of the bathroom.

Generally, the thickness of concrete can be manipulated within 5 cm, so that the relative height of the toilet door is more than the internal structure of the toilet.

Do the math how much it will cost you to renovate your home

1. Generally speaking, the floor of the bathroom is slightly lower than that of the living room to prevent water from flowing from the bathroom to the living room. If the floor of the bathroom is higher, different remedies need to be taken according to the actual situation. If the floor of the bathroom is higher than the floor of the living room before the decoration, you can combine the thickness of the floor tiles and wooden floors to make the height of the living room material slightly higher than the floor of the bathroom.

2. In the process of laying bathroom floor tiles, you can choose to lay a bonding layer with a thickness of no more than 2cm, and use the thin paste method for construction. When laying tiles in the living room, the thickness of the cement mortar should reach 5cm, so as to ensure that there is a thickness difference of 3cm between the living room and the bathroom.

3. But if after the decoration, you find that the bathroom floor is higher than the living room, then you can install a 2cm thick door stone at the bathroom door. In this way, after the installation of the door stone, the height of the bathroom door will be about 2cm higher than the bathroom, and the water flow out of the bathroom can be effectively avoided in the process of use in the later stage.

4. Or the bathroom can be made into a dry and wet separation area, and shower supplies can be installed in the shower room, so that the water will not flow out of the living room when taking a bath, and it can also play a certain role in retaining water.

Enter the area and get the decoration for free**].

If there is a bathroom, the ground is higher than the living room, there may be water backflow in other rooms, you can do water retaining treatment at the door of the bathroom, add the height of the water stop strip, 20 mm out of the bathroom floor and make the waterproof to the water stop strip, if the bathroom tile is not well paved, all the tiles should be replaced and re-paved.

If you want to solve this problem effectively, you can design a water retaining platform at the door of the bathroom, and then pour concrete, as much as possible to control the thickness to 50 mm.

You can use cement to build the floor of the living room to a higher base, which can solve this problem.

Summary. Hello, the bathroom floor cannot be higher than the bedroom.

Hello, the bathroom floor cannot be higher than the bedroom.

Because according to the principle of traditional Chinese physiognomy, the floor of the bathroom should not be higher than the floor of the bedroom, especially the position of the bathtub should not be high.

If the sewer pipe is blocked or the drainage is not smooth, the bathroom floor is high and sheltered in the bedroom, and the water may enter the bedroom.

If the floor of the bathroom is higher than the floor of the living room, we have to choose. The floor of the bathroom should be knocked down properly, because this is the only way to prevent the water from the bathroom from flowing into the living room.

The bathroom floor is higher than the living room floor, and a threshold should be added at this time to prevent the bathroom water from flowing out; In addition, it is necessary to pay attention to the water flow condition of the bathroom, control the water flow of the faucet in the bathroom, and maintain the faucet in time to prevent the water overflow caused by damage to the faucet.

That can only be adjusted by choosing the thickness of the floor tiles when laying them. Thick floor tiles are used for the living room, while tiles are about two centimeters thinner than the living room for the bathroom. Another way is to build a higher water retaining platform at the door of the bathroom, but this is a little less interesting in terms of aesthetics.

To increase the floor drain, you can make a groove at the door of the bathroom and the living room, and add a floor drain in the groove, and the water in the bathroom will flow out of the floor drain and will not enter the living room.

With the addition of sill stones, the bathroom floor can have an arc, a little lower inside, a little higher outside, and the floor drain can be installed inside. It is also possible to separate wet and dry areas in the bathroom.

In order to prevent the water on the bathroom floor from spreading to the outside, usually the floor of the bathroom will be about 20 30 mm lower than the ground outside the bathroom, but some people do not control the height difference of the ground in the process of decoration, which leads to the bathroom decoration floor is higher than that of the living room.

This can play a role in retaining water. <>

1. How to prevent the floor of the bathroom from being higher than the living room?

In order to prevent the floor of the bathroom from being higher than the living room, first of all, in the process of the construction of the main structure, it is necessary to adjust the height difference between the structural ground of the bathroom and the structural ground of other rooms by weaving the template of the lower part of the floor slab, under normal circumstances, the ground of the bathroom is about three centimeters lower than the ground of other rooms, and in the process of decoration, the construction team is also required to carry out an overall leveling of all the rooms in our room, and it is best to leave a one-meter control line, so as to control the ground height of the final completion of the bathroom, so as to achieve this effect lower than that of other rooms. <>

2. What should I do if the bathroom floor is higher than the living room before home decoration?

If the bathroom floor is higher than the living room before the renovation, it is easier to solve it than after the renovation, for example, we can solve the problem of the height difference of the ground through decoration, and we can lay floor tiles.

Combine the thickness of the layer to solve this problem, for example, when we lay the floor tiles in the bathroom, we can lay a thickness of two centimeters or paste a thickness of less than two centimeters, and when we pave the tiles of other rooms, we can also use the cement mortar binding layer to keep it at about 5 cm, so that the living room can be higher than the area in the bathroom. In addition, you can also make a concrete water retaining platform at the door of the bathroom, that is, pour a layer of concrete at the door of the bathroom, and the thickness of the general concrete can be controlled at about 5 cm, so the height of the door of the bathroom is higher than the interior of the bathroom. <>

There are two scenarios to solve:

Situation 1: Before renovation, the floor of the bathroom is higher than that of the living room.

1. Floor tiles can be paved to solve, for example: when building a bathroom, as long as tile adhesive is used, a thin adhesive layer of about 2cm is laid. When laying the living room floor, use cement mortar to lay a bonding layer of about 5cm, so that the living room floor will be about 3cm high for the bathroom floor.

2. You can make a screed layer in the living room, for example: if you need to lay a solid wood floor, then you can make a layer of fine stone concrete with a thickness of about 5cm on the living room floor, so that the living room floor is about 3cm higher than the bathroom.

3. You can make a concrete water retaining strip at the door of the bathroom, and the thickness is controlled at about 5cm, so that after completion, the height of the bathroom door is about 3cm higher than that in the bathroom.

Situation 2: After home renovation, the floor of the bathroom is higher than that of the living room.

1. For this problem, I personally suggest that you can deal with the door of the bathroom, for example: you can install a door stone with a thickness of about 2cm at the door of the bathroom. After the installation of the door stone is completed, the height of the bathroom door is about 2cm higher than that in the bathroom, so that the water retention demand can be realized.

2. The bathroom can be made into an area of dry and wet separation, and the shower items can be installed in the shower room, so that the water will not flow outside when taking a bath, which can also play a role in retaining water.

The floor of the living room or the floor of the bathroom can be raised and redecorated so that it is lower than the floor of the living room or as high as the floor of the living room.

You can ask a professional decorator to help us solve this problem, because we can't solve this matter by ourselves, and this place needs to be renovated, and we also need to re-lay some cement, because only by doing so, can we solve this problem.

You can build a threshold at the door of the bathroom, preferably using a marble threshold.