Does Minesweeper have a thunderbolt artifact? Minesweeper Minesweeper Minesweeper?

Look at the picture, <>

The reasoning is very complicated.,It's definitely not thunder in the green circle.,This chaos is easier to push.,There's a thunder in the two squares next to the 4 on the track.,The 4 under the finch and the 3 can be pushed out of the green is not thunder.。 The others are based on the total number of remaining mines, and 4 more are extrapolated using the hypothetical method, with one color representing the possible distribution location of one type of mine.

Try your luck and choose one with a high probability.

According to its principle of action, it is divided into two categories: mechanical minesweeper and blasting minesweeper. There are three main types of mechanical minesweepers: rolling, percussion and excavation, which are hung in front of tanks and special minesweeping vehicles. Rolling minesweepers rely on the gravity of the rollers to detonate mines; Percussion minesweepers rely on high-speed rotating rollers to swing the chain to detonate mines by striking at the ground; Excavator minesweepers rely on a coulter to plow mines out of the ground and out of the path.

There are two types of blast minesweepers, which are used to open up infantry access and tank access, both of which rely on the ** effect of explosives to detonate or disable mines. There are rigid in-line charges, flexible in-line charges, group charges and tandem group charges, etc., and most of them are towed or pushed by rockets to open up passages in minefields.

My best!

Yours is a mechanical minesweeper. According to the working principle, mechanical minesweepers are divided into three types: rolling type, digging type and strike type. Rolling minesweepers use the weight of steel rollers to blast mines, heavy.

7 10 tons. Excavator minesweepers use toothed coulters to dig out mines and row them out of ruts, weighing tons. Percussion minesweepers use moving parts to slap the ground and make mines**.

The rolling and digging types open up rutted paths, the width of the minesweeper on each side is meters, and the speed of the minesweeper is 10-12 kilometers per hour. The strike type opens up a full path, the width of the minesweeper can be up to 4 meters, and the speed of the mine is 1 2 kilometers per hour.

The goal of the game is to find all the mines in the minefield as quickly as possible without stepping on them. If it's a mine that's dug up, you lose the game. If you can't tell if a block has mines, right-click twice to mark it with a question mark (?).

Later, you can right-click on a block once to mark it as a mine, or right-click on a block twice to remove the marker.

If all the mines around a number block are marked, you can point to the block and click the left and right mouse buttons at the same time to dig up the remaining blocks around it. If the mines around the numbered block are not fully marked, the other hidden or unmarked blocks will be pressed once (i.e. flashed) when both buttons are clicked at the same time.

Look for common combinations of numbers, which will often indicate common combinations of mines. For example, three adjacent numbers 2-3-2 on the sides of a set of undug blocks indicate that there are three mines in a row next to those three numbers.

Skill comes from practice... If you play more, you'll be almost accurate...

The detachment of the Engineer Corps' Mine Blasting Brigade is usually responsible for clearing mines on roads, important targets, and areas, and providing technical guidance for mine clearance of other arms. Minesweeping is carried out with reconnaissance and then clearance. If time is pressing, you can sweep while probing, and sometimes clean directly without detection.

Post-war comprehensive mine clearance refers to the operation of carrying out comprehensive reconnaissance and thorough removal of mines and other materials in the fields, rivers, mountains, forests, residential areas, roads, and so on where battles have been fought. Because the area is vast, the tasks are heavy, and the number of troops and time required is relatively large, except for important targets and areas that are cleared by the engineering troops, ordinary areas can be cleaned by other branches of the armed forces or militia under the guidance and assistance of the engineering troops. Before clearing mines, it is necessary to collect relevant documents and intelligence materials on the enemy's mines and bombs, so that measures can be taken in a targeted manner.

Other branches of the armed forces and militia that are responsible for mine-clearing tasks should be trained in mine-detection and mine-clearance techniques. When organizing operations, each detachment can be used for reconnaissance and search and platoon of an area or target; It can also be organized into reconnaissance detachments and search and platoon detachments to operate separately. The mine-clearing detachment should report its operations to its superiors in a timely manner and submit a mine-clearance report form after completing its tasks.

The leading organs should organize a review or quality check of the areas (targets) that have been cleared, and only after confirming that the clearance is thorough can the troops be allowed to be stationed or handed over to the local authorities.