What are the skills of minesweeping, the rules and skills of minesweeping

Minesweeping skills [Sharing] Without further ado, I summarize the goals of advanced minesweeping exercises as three stages: speed - skill - speed The first stage: speed (applicable to people for more than 160 seconds) In this stage, it is hard practice, as long as you spend time, you can reach 160 seconds, and the time spent depends on personal understanding.

Understand certain formulas, such as between a strip"121, two 1s above is thunder","212, above 1 and 2 on the diagonal upper corner is thunder","1221, two 2 above is thunder","2112, the top of the two 1s is not thunder, the top of the 2 and the bevels on both sides are thunder"Probability theory can be used where you need to guess, and although you may not always be able to guess correctly, you will definitely guess more correctly than you will guess wrong. In addition, don't guess twice where you can guess once, two consecutive 50% equals 25%, for example: 1 2 mouth 1 mouth mouth 1 obviously there is a thunder in the left two squares, and there is a thunder in the right two squares.

If you guess the two on the left first, you have 50% of the matches, then you have to guess the two on the right, and finally it becomes a 25% chance of success. If you guess the right first, you have 50% of the right, and then you can push out the left one, no need to guess The second stage: skills (suitable for people of 100-160 seconds) When you reach this level, don't care about the time when you play again, put the goal on using the least number of clicks, as long as you can click less once, resolutely do not click more For example, there are several 1s next to a red flag, and double-clicking which 1 has the best effect.

In addition, sometimes marking the red flag also makes you spend more time, such as right-clicking the red flag first, and then double-clicking the 1 next to it, and the result only pops up one square, so why not just point out that grid? Just click Remember, don't care about the time, you may be slower at first (slower, more time is used than before), but slowly you will become faster (the click speed is still not fast, but the time is used less than before) Stage 3: Speed (100-80 seconds for people) On the basis of the second stage, speed up the clicking speed and see how many clicks can be made per minute, and strive to increase the speed to 120 clicks or more minutes Pay attention to any detail, the resolution of the monitor, the sensitivity of the mouse, the sitting posture, the way to take the mouse, the mood at the time, and the rhythm of ** on the computer Excerpts.

I can't play minesweeper, the teacher teaches you the rules of minesweeping.

The rules of minesweeper are to click on the square, if it is a mine, the game loses, find all the mines game to win, the tricks are as follows:

1. At the beginning, it is purely a matter of luck, as long as you click on an area, you can officially start. 1 represents that there is a thunder in the up, down, left, right and oblique angles of 1, and it is pushed in turn, 2 has 2 thunders, and 3 has 3 thunders.

2. The second and most important step is to determine the location of the mine according to the existing situation.

3. Next, it is to calculate, which is also a very critical step, for example, because the 1 on the right side of 2 already has a subordinate thunder, so there is no thunder directly below the 2 on the right, so it can be judged that there are two mines on the left, satisfying two 2s.

There is already a definite mine, at this time, you just need to put the mouse on 1, hold down the right button, and then click the left button, and all the other blocks around 1 will be clicked. This little trick is very helpful for speeding up.

5. Two 2 clips and one 1, and there must be thunder under the center of 1. Two 2 clamps n, n > 1 3, 3 all have thunder underneath. If the central number is 1, it means that there will definitely be a thunder in the 8 grids around 1, that is, there will be thunder diagonally. Three 1s in a row, and the middle 1 has thunder.

When the minesweeper rules, first of all, just point a small man on it, and a small piece will appear, and the number displayed on it represents how many mines are in the eight grids around, and it is judged that the thunder can be planted in the flag, and all the mines are found to be victorious. The trick is that two 2 clips and one 1, there must be thunder in the middle, two 2 clips n 3, and all 3 have thunder.

How to sweep mines

Minesweeper is a very classic stand-alone game on the computer, its basic rule is to click a small grid at random, there will be a small block, the number displayed on it means that there will be several mines in the surrounding eight grids, for example, 1 is only 1 thunder around, the right click can be a flag for this grid, and the left click can turn the grid open.

Techniques for minesweeping

Fill in all the parts that are not thunder, then the remaining grid must be thunder, right-click to mark the flag. Some of the basic skills of minesweeping have just learned, two 2 clips and one 1, and there must be a mine under the center of the 1, which is directly marked.

Two 2 clamps n (n>1) 3, 3 all have thunder at the bottom, the center number is 1, which means that there must be a thunder in the 8 squares around 1, that is, there is thunder diagonally. Three consecutive 1s, the middle 1 has thunder, these are some basic judgment methods, after mastering the need to extend the judgment according to different situations.

The rules of the game are very simple, click on the squares, if it is a mine, the game loses, find all the mines to win the game.

Tips:

1. Double-click on the single thunder: hold down the right button on the grid with thunder and do not let go, move to the number 1 and press the left button, and then release the right button (i.e.

2. Listening to the fast-paced ** helps to concentrate and can also mask the sound of the mouse.

3. Reduce the resolution of the screen and reduce the sensitivity of the mouse at the same time, which helps to improve operability.

Note:

1. Practice makes perfect a game, novices can start with the beginner and start step by step.

2. Don't be obsessed with one grid, you can try to find it from somewhere else.

3. Don't guess whether there is thunder under the grid, each grid is connected with each grid.

4. Minesweeper bug: Open the minesweeper interface, enter xyzzy, press the shift key in the lower right corner, at this time, the mouse is placed in the minefield, and you will see a small light dot flashing in the upper left corner of the screen.

The minesweeper mantra is as follows:

1. As soon as you see this single 1 connected block, it must be a thunderbolt.

2. Since a thunder has been determined, the blocks connected to the surrounding 1 must not be thunder and can be opened.

3. Look at the skills of 3, the 3 below are only connected with two unopened blocks, so these three must be thunder.

4. This kind of three 1s are connected, and only one of the bottom ones must be thunder, and the square indicated by the arrow above is definitely not thunder.

5. The skill of the number 2, this 2 is only connected to two squares, then these two must be thunder.

If all the mines in the vicinity of a tile have been marked, pressing the left and right keys at the same time will automatically sweep away the remaining tiles around it, saving you from pressing them one by one.

In the grid lined up, two 1 clips and one virtual 2, 1 bottom difference Qi socks must have thunder; Two 2 clamps and one 1, 1 must have thunder under it; Two 2 clamp n 3, all 2 and 3 have thunder underneath; Two 2s are on the side, and there are mines under 2; Three 1s in a row, and the middle 1 has thunder. Four consecutive 1s on both sides of the 1 have thunder.

The 2 and 1 here are not only the squares of can be applied, sometimes for example, 3 or 4, but there is already a mine nearby, and the remaining 1 or 2 are not yet certain, of course, you can also use this principle.