4 Can a 5 meter high apartment be made with two floors? How do you design the layout?

The apartment can be divided into two floors, so we must first carry out the overall design planning and layout according to our own needs。There are many young people who like to raise the house very much, because this type of house is usually cheaper, and we can transform it according to our own needs. For example, a 60-square-meter high-rise apartment can reach 100 square meters by making it into two floors, which meets daily needs.

Before we start decorating, we must first carry out the most basic design layout. First of all, the height of the upper and lower floors, the thickness of the floor slab is usually about meters, and the height of the whole apartment is meters, which means that the height of the lower floors is in meters, and the height of the upper floors is about two meters. Then it is the functional division of the lower and upper floors, many people will choose to design the lower part as a living room, kitchen, due to the need to receive guests, higher can make the other party feel more spacious, is a kindergarten teacher will not make us feel depressed.

Most of the top is used as a bedroom, which can ensure privacy, and it doesn't matter if the height is a little lower.

Secondly, it is necessary to carry out interior design, for example, the kitchen and living room must consider the direction of water and electricity, especially the drainage of the bathroom, if the conditions permit, you may wish to make a bathroom upstairs and downstairs, which will be more convenient to use. Before designing, we also need to combine the placement of furniture, especially the socket must be sufficient, otherwise it may bring trouble to subsequent use. You can ask the designer to make an overall design drawing, and then start to decorate after adjustment, after all, this is a big thing, and it is not something that can be started casually.

Finally, it is necessary to select the construction and style of the floor staircase, for example, the inclined staircase can make full use of the space below and serve as a storage room. The floor slab style is usually divided into steel structure and concrete structure, and the steel structure is cost-effective and can be planned according to demand. Concrete structures, on the other hand, are more expensive, but have less vibration and a higher load-bearing capacity.

It is very good to make two layers of high-meter technology, so if you want to carry out the whole design and layout, the best way is to have a good partition, and the design space should be from top to bottom, which is relatively good.

A metre-high apartment can be divided into two floors, but it is best to plan carefully when designing, make good use of every space, and find a professional designer.

OK. You can use the upper floor as a bedroom and the lower floor as a living room, which will be more practical and separate the movement and static.

Summary. How to design a double-storey apartment with a length and width: dear, I'm very happy with your question!

Generally speaking, the area of the apartment is relatively small, the living room, bedroom, dining room, etc. are all in a large space, so the first thing to consider when decorating is the functional partition, generally speaking, the functional partition can be effectively separated by some partitions and so on. 2. The purchase of furniture is complementary to the overall decoration of the room, so the choice of furniture plays a very key role in the overall decoration. In the selection of furniture, it is necessary to determine it when designing in the early stage, after all, the space of the apartment-style house is limited, and the size should be determined when designing.

3. The overall style can choose simple, modern and other space-saving residences, do not choose American, European and other styles, but for which style, we must strive to be concise and bright, so that the room appears more layered, so that the space seems much larger. 4. Most apartments don't have wardrobe space. Try using curtains and adding a wall, and then hanging a lever or shelf to transform a part of the room into a wardrobe.

The bedroom can only accommodate the next bed, so you can put enough effort into the headboard and bed frame. At the same time, it is absolutely amazing to create storage space and make it appear larger.

How to design a double-storey apartment with a length and width: dear, I'm very happy with your question! Generally speaking, the area of the apartment is relatively small, the living room, bedroom, dining room, etc. are all in a large space, so the first thing to consider when decorating is the functional partition, generally speaking, the functional partition can be effectively separated by some partitions and so on.

2. The purchase of furniture is complementary to the overall decoration of the room, so the choice of furniture plays a very key role in the overall decoration. In the selection of furniture, it is necessary to determine it when designing in the early stage, after all, the space of the apartment-style house is limited, and the size should be determined when designing. 3. The overall style can choose simple, modern and other space-saving residences, do not choose American, European and other styles, but for which style, we must strive to be concise and bright, so that the room appears more layered, so that the space seems much larger.

4. Most apartments don't have wardrobe space. Try using curtains and adding a wall, and then hanging a lever or shelf to transform a part of the room into a wardrobe. The bedroom can only accommodate the next bed, so you can put enough effort into the headboard and bed frame.

At the same time, it creates a storage space and makes the space look wild, and the celebration is bigger.

Dear, this suggests that you find a designer to measure the size of the plan.

Hello, there are three ways to do loft compartments, the height of the layer is more reasonable to distribute the lower meter, and the upper meter is more appropriate. The three methods are: 1. The advantages and disadvantages of this method are obvious.

The advantage is that the construction period is short and the cost is low. The disadvantages are: the firmness is relatively poor, the waterproofness is poor, the vibration is very large, even if the soundproof cotton is laid between the bracket board and the floor, the sound insulation effect is still very poor, there is almost no privacy upstairs and downstairs, and there is no fireproof, so in the process of doing, the wood must be fireproofed.

2. This method of steel frame structure is more common, because the construction period is short, and the construction period is also moderate. The construction difficulty is medium, but the disadvantages are also more obvious: the vibration is large, the anti-cavity stuffy water and sound insulation are poor, and the thickness of the compartment is large, and the ceiling is about 20cm-30cm.

This method is first of all to use the channel steel as the main support, every 50-80 cm, and then weld it with a triangle steel at intervals of 50-80 cm, and the welding point is best to repeat the anti-rust paint 3 times. 3. Concrete cast-in-place partition concrete cast-in-place partition is generally made of double-layer laying reinforcement, the main reinforcement is 14mm, the auxiliary reinforcement is 10mm, the vertical rough partition between laying is about 15 cm, and the cement should be 425 strength, and the ratio of C25 or C30 high-strength concrete is proportioned. According to the operation method, it can be divided into three sub-categories in cast-in-situ, one is the wall welding method, the other is the reinforcement welding method, and the third is the chemical bolt method.

My house is on the ground floor and is almost 5 meters high. It is planned to be divided into two tiers. Now I want to know what material is better for interlayering. How much does it cost? How much does the staircase cost?

The mezzanine of a house generally has three materials; Concrete structure, timber structure, steel structure, etc. The weight of the concrete structure is too heavy, the construction period is too long, the quality is not easy to control due to too many processes, the concrete wall in the early stage and the crack layer in the later stage are not easy to bond and crack, the seismic performance is not good, and the economy is high. The weight of the wood structure is too light, the wood is not easy to repair and cover, it is not resistant to moisture and fire, it is easy to rot, it is easy to crack, and the impact resistance is not good.

The steel structure has high strength, light weight and good seismic performance. Therefore, it is better to choose a steel structure for a comprehensive proposal.

How do I split a TV background wall into three pieces?

The size is divided according to the size of the home background wall, the size of the background wall will be coordinated with the size of the craft grid, if the whole TV wall is 3 meters, then each craft grid will account for 1 6 of the entire background wall.

Can a metre tall house be made into two floors on the first floor?

It is impossible to open the windows, but there is no problem in building the second floor inside。Some are demolished because the materials used, such as cement pouring, increase the weight of the building itself, which is a kind of damage to the bearing capacity of the floor itself, while others are made of lightweight, structurally stable C-shaped steel, but the cost will be very high, about 2,000 yuan per square meter.

My house is meters high on the ground floor. I want to build it into a re-examination building. What is the way to improve.

Digging down is unrealistic, it's not clear what neighborhood you live in, it's a lot of work, it also breaks the moisture barrier, the water will flow backwards underground, be careful! The four meters and five meters are divided into two floors, and the thickness of the mezzanine floor slab is calculated by 20 centimeters, and the floor height is meters, which is relatively low. So, it depends on what you want for the two-story functionality.

If the living room on the first floor can be slightly higher meters, the bedroom and storage room on the second floor can be reasonably distributed. Digging down is unrealistic, it's not clear what neighborhood you live in, it's a lot of work, it also breaks the moisture barrier, the water will flow backwards underground, be careful!

A background size to divide the size,The background wall is large and the size of the process grid is also wider, so it will be coordinated,If the entire TV wall is 3 meters,Then each process grid。

Make the apartment a duplex and use some warm tones so it doesn't look oppressive.

It is easy to crack, has poor earthquake resistance, and has a high economy. The weight of the wooden structure is too light, the wood is not easy to repair, it is not moisture-resistant or fire-resistant, it is easy to be mothed and cracked.

I think it's important to have an open kitchen at this time, so that you can have a wider view.

Some demolitions are due to the use of materials such as cement pouring to increase the weight of the building, which is a kind of damage to the bearing capacity of the floor.

Make the apartment duplex and then use some warm tones which are weaker but still powerful.

Repression refers to a mental process that can be perceived by the conscious mind and disturbs the conscious feelings, and is the method used by each person to control certain desires and desires, which are not in the same serious conflict with the consciousness as those of the subconscious process, they are weak but still powerful.

The steel structure has high strength, light weight and good seismic performance; Therefore, it is better to choose a steel structure for comprehensive advice.

Wood is not easy to repair, not moisture-resistant, not fire-resistant, easy to be mothed, easy to crack, and not good seismic resistance.

3 0 1 The floor area of a building shall be calculated as the sum of the horizontal areas of the outer perimeter of the natural layer of the external wall structure. Structural floor height.

If it is at or above the level, it is promised to calculate the full area; If the height of the structure is below, the area of 1 2 should be calculated.

Excerpt from - "Code for Calculation of Construction Area of Construction Projects" is a national standard, numbered GB T50353-2013, which has been implemented since July 1, 2014. The original "Code for Calculating the Construction Area of Construction Projects" GB T50353-2005 shall be repealed at the same time.

Regardless of the height of the floor, the floor area is calculated according to the natural floor.

As far as the current market in Chongqing is concerned, there are relatively few meter-high apartment projects compared to normal high-ceiling projects. For this kind of meter-high project, you can make two floors by yourself when you decorate it later, which is equivalent to you buying one floor and then giving away the area of one floor. Another situation is that the policy introduced in Chongqing in April will not allow the land acquired after April this year to build such meter-high projects.

Therefore, this kind of product will become an out-of-print product in the future and has a high investment value.

I hope mine can help you and I wish you a happy life.