What should I do if my home is connected to wifi but I can t connect to the Internet

If you can't connect to the Internet, there are many reasons, it may be that the network is not good on the side of the business, it may be that your router signal is not good, or it may be that you are not set up well, it is recommended to reconnect and set it again.

If you can't connect to Wi-Fi, you can restart your Wi-Fi or install a network cable.

Your home wifi is connected, but you can't get on the network, which means that there is a problem with the network speed or gateway, just find someone from the network company to take a look.

Your home wifi is connected, but you can't get on the network, it may be that the quality of wifi is too bad, or the quality of the mobile phone is not good, you can change one of them.

WiFi connection but can't get on the network is likely to be a router or other problems, you can call the wifi company, that is, the wifi customer service of mobile or telecommunications to take a look.

You can reboot it once, or see if the password is correct.

Turn the wifi off and on again.

Is your network in arrears? Or if there is any fault in the network, you can call ** to consult.

If your home WIF is connected, but you can't access the Internet, it may be that your network is connected by many people, and then it is very stuck.

The mobile phone clearly shows that it is connected to WiFi, but it can't connect to the Internet?

If you are using a Huawei phone and can connect to Wi-Fi but cannot access the Internet, you can use the following methods to troubleshoot the problem:

1. If you are using a home network, it is recommended to connect to other WiFi or mobile phone personal hotspots for testing and troubleshooting

1.If connected to other wifi is normal.

1) Please do not stay away from the router;

2) Please check whether the broadband account expires, restart the router and restart the phone before trying;

3) If the router has been set to the blacklist and whitelist, you need to check whether the MAC address of the mobile phone is added to the router, if the router does not set the blacklist and whitelist, please power off the router and restart the attempt.

2.If you connect to other wifi, you can't get online.

1) Please turn the WLAN switch back on and try to connect;

2. If individual applications cannot access the Internet:

Please open Settings, enter Traffic Management in the search box above and click to enter the Traffic Management page, click Application Networking, and check whether the WLAN permissions are checked for individual applications.

Sometimes, I don't know why this happens, a small exclamation mark is displayed at the wireless network, although it is connected, but it cannot access the Internet. How to deal with this situation? Why can't I connect to the Internet when I connect to the wifi?

1.The router is unstable.

2.Some wireless routers and optical modems (broadband modems) are of poor quality and will crash after a long period of operation.

3.Solution: Turn off the power of your home wireless router and optical modem (broadband modem), wait for a few minutes, and then turn on the power and start the device.

4.After the normal start, connect to the wifi to test whether it can be used normally.

5.Broadband is down.

6.If your home wifi was connected to the Internet before, suddenly there was a problem of not being able to access the Internet.

7.And the router and cat have been powered off and restarted, but it still can't be used after connecting to wifi.

8.In this case, it is very likely that there is a problem with the broadband line, or the broadband is in arrears.

10.(2) If there is no arrears, you can transfer to the manual customer service, report the fault, and let the operator arrange staff to provide door-to-door service.

If you don't know how to dial up Internet access with a broadband connection on your computer, you can read the tutorial below to see how to do it.

12.At this time, if the computer can access the Internet, it means that the broadband line is normal and there is no problem.

13.On the contrary, if the router is not used and the computer is directly connected to the cat, the computer cannot access the Internet, and most likely there is a problem with the broadband line.

14.(3) The router is not connected to the Internet.

15.If there is no problem with your broadband line, there is no arrears in your bandwidth, and your broadband carrier is not responsible for debugging your router.

16.So, at this time, please follow the steps below to check the relevant configuration in your router.

17.You can use a computer or mobile phone, log in to the router's settings page first, find and open the Internet settings or WAN port settings, and you can see the router's networking status information.

Reasons why there is no internet for wifi connection:

1. Consult the broadband operator to check whether your broadband line is faulty or the broadband tariff is overdue;

2. Check whether the network cable connected from the cat is connected to the WAN port of the wifi router, and check whether the interface of other lines is loose;

3. Enter the WiFi router configuration interface and check whether the PPPoE dial-up username and password are entered correctly. In the DNS configuration item, set the DNS system to be consistent with that of the broadband operator.

Extended Resources: Specific Methodology Steps:

2.Click "Open Network & Sharing Center" as indicated by the arrow below.3Click on "Change adapter settings" on the left, 4

Left-click and double-click "Local Connection", 5Click "Share", then under "Share", check "Allow other network users to connect through this computer's Internet connection" and click "OK", 6Let's take a look at the network connection status, I can already access the Internet:

Mobile phones are an indispensable communication tool in people's daily lives, and in addition to that, it also has many entertainment features. Many people are inseparable from their mobile phones almost all the time, if they encounter a mobile phone that can't connect to wifi during use, they can't wait to smash their mobile phone, then, let's share with you the solution that the mobile phone can't connect to wifi, let's take a look!

1. Why can't the mobile phone be connected to the wifi computer?

If the wifi computer can be connected, it means that there is no problem with the wifi, and if the mobile phone cannot be connected to the wifi, it means that the mobile phone is a problem.

If you are using a mobile phone with wifi, you can take a look at the wifi icon. Grayed out means that you can't access the internet. In a colored state, you can access the Internet.

If the mobile phone is set with Internet protection, it is normal that it cannot access the Internet. General housekeepers have this function. You must log in to the router interface to reset the settings.

If that doesn't work, then you can see if your phone can access the Internet through 2G and 3G channels. If it does, it proves that it's not the browser that's broken. It's that your phone's wifi chip is damaged.

It is recommended to go to the local after-sales service for maintenance.

2. Why can't the mobile phone connect to the wifi sharing wizard?

Solution 1: Make sure that the switch of the wireless card is turned on, and if it is not turned on, please turn it on manually.

Solution 2: Select the correct sharing mode, Android phones can only use wireless AP WPA2 mode (Win7), iOS phones can use WPA2 mode and WEP mode.

Open the wifi sharing wizard startup interface - advanced settings - sharing mode selection - select the corresponding mode.

Solution 3: Check whether the network card of the computer network connection can be shared. If you find that the NIC that you are using is not being shared, exit the software interface completely and manually set the sharing.

Operation steps: Right-click the network icon on the desktop - Properties - Change the device settings - select the network card that you want to surf the Internet (mine is the local network card) - Right-click on the properties - Share options - the first tick, select Wireless Connection3 - OK - Restart the software.

Solution 4: Disable the built-in firewall and ARP protection of 360 and other protection software.

Open the Computer Control Panel - System Security - Windows Firewall - Turn the Firewall on or off - Select Off - OK.

It could be that your router in your home doesn't have a network.