How do you properly clean the rubber strip on the side of your refrigerator?

To properly clean the rubber strip on the side of the refrigerator, first add a few drops of dish soap to a basin of warm water. Then find a piece of cloth, find one. A top-up card to pay for your mobile phone.

Then wrap the recharge card with a cloth, and then grab the recharge card and wipe it with water. This will be clean.

Here are a few ways to clean dirt from the side strip of your refrigerator:

1.Cleaning the Nano Magic Sponge Block with the Nano Magic Sponge Block is one of the more amazing things. It has a magical effect on cleansing.

No detergent is required. Take this magic sponge block and dip it in a little water, and then wipe it back and forth in the rubber strip of the refrigerator, and soon you can wipe off these black dirt and restore the refrigerator.

2.Clean with white vinegar Pour some white vinegar into the bowl, wipe the edge of the refrigerator with a rag dipped in white vinegar, or wipe with a damp paper towel dipped in white vinegar. White vinegar softens these dirts. If.

The rubber strip on the side of the refrigerator must be wiped with black crystal, which has the effect of disinfection and will not hurt its surface.

It can be cleaned with water, or it can be cleaned with some other substance, in fact, it is very simple, you can try it yourself, there is no problem at all.

Dip a rag in white vinegar, wring it out slightly and wipe the refrigerator seal, wipe it a few more times to clean up the feeling.

It can be removed and carefully brushed in water with dish soap and white vinegar. Then press it again.

Question 1: How to clean the refrigerator door seal Operation method:

1.Unplug the power plug from the socket and the interval between unplugging and plugging should be greater than 5 minutes.

2.Grasp the corner of the door seal with your hand and slowly remove the entire door seal section by section.

3.Soak a soft cloth with warm water, dip it in neutral detergent (for washing dishes and chopsticks) and carefully wipe all corners of the door seal, and wrap wooden chopsticks around the grooves to wipe clean. (After wiping, be sure to scrub the detergent residue with clean water.) ）

4.When embedding the door groove after cleaning, fix the four corners of the door seal first, and insert the door groove section by section.

Question 2: Can the sealing strip of the refrigerator be removed for cleaning, and what is the best way to clean it? Never take it off, you won't be able to put it back. Once disassembled and assembled, it is easy to deform, and then leak cold and form water beads.

Make a watering can for watering flowers, decorate it with 75% alcohol (available at pharmacies), spray it all over the seal, and wipe it with a cloth after a few minutes. If it's too dirty, clean it with dish soap before spraying.

Question 3: How to remove the refrigerator door seal and then clean It can be removed and cleaned, but you should pay attention to it carefully when removing and assembling the door seal. When dismantling, the door seal should be pulled from the 4 corners, and the door seal should not be torn too hard.

When assembling, the corners should be pressed into the door bile groove first, and then the door seal should be pressed from the 2nd end to the middle, and attention should be paid to completely press the barb wing of the door seal into the groove of the door liner.

Question 4: How to clean the refrigerator seal? Cleaning the refrigerator seal: clean it with a damp cloth dipped in detergent, and then wipe it several times with a damp rag to remove the detergent.

Question 5: How to clean the black spots on the refrigerator door seal? To give you a suggestion, apply some 84 disinfectant to the dark spots and bleach, which is what I did.

Question 6: Is it good to remove the refrigerator door seal and clean it? It can be removed for cleaning, but you should be careful when removing and assembling the door seal.

When dismantling, the door seal should be pulled from the 4 corners, and the door seal should not be torn too hard. When assembling, the corners should be pressed into the door bile groove first, and then the door seal should be pressed from the 2nd end to the middle, and attention should be paid to completely press the barb wing of the door seal into the groove of the door liner.

Question 7: Why is the sealing strip of the refrigerator door always moldy, and how should it be cleaned Reason:

Refrigerators are low, humid places, and if the grooves of the sealing strip are not cleaned regularly, bacteria can easily grow and mold develop.

Cleaning method: use toothpaste: apply toothpaste to the moldy area, then wipe it with a towel, and finally wash it off with water;

Use vinegar: Cleaning the sealing strip of the refrigerator with vinegar can clean off mildew and play a role in disinfection;

Use bleach: Dilute bleach and water at a ratio of 1:99 and wipe the moldy area with a towel to remove it.

Question 8: How to clean the sealing strip of the refrigerator Remove the sealing strip, boil it in boiling water, and then wipe it clean with a brush and stick toothpaste, and put it on.

Question 9: How to wash the refrigerator seal if it is black The refrigerator seal should generally be kept clean If it is polluted by grease stains for a long time, it will penetrate into it and cause aging, so it is difficult to clean up.

Hope it helps.

Nowadays, families basically have refrigerators, but because they have been for a long time, or they are not usually cleaned, the sealing strip of the refrigerator is black and dirty, and it is particularly troublesome to clean up. In fact, there are many methods that we can try, such as using alcohol, white vinegar, cola, etc., all of which can clean the refrigerator.

Three meals a day are indispensable, and if we want to eat fresher food, we can't do without the help of the refrigerator. And you find out that no, the freezer and refrigeration of the refrigerator have seals, which are to ensure the tightness of the refrigerator. After using the refrigerator for a few years, the seal that was originally white became very black and moldy.

Let's take a look at how to clean it.

1. Use toothpaste. The most effective way to clean the surface of the refrigerator is to clean it with toothpaste, find a damp cloth that is not too wet, squeeze some toothpaste on it, and start wiping the surface of the refrigerator. For places with more stains, you can squeeze some toothpaste or wipe it several times, this method is to use the friction agent in the toothpaste to remove stains and easy to clean, so that the refrigerator will be easy to change the old look to a new look.

Second, white vinegar and alkaline noodles are needed. This is often seen in the kitchen items, spray some white vinegar on the refrigerator seal to soften the dirt, and then sprinkle some alkaline surface on it, especially in the place where there are many mildew spots, and wait for about 5 minutes to wipe it with a rag easily, you can find that not only there is no mildew, but the color of the refrigerator seal has also changed back to the same as before, very clean, and has the effect of sterilization.

3. Baking soda cleans. Make a solution with a ratio of baking soda and water in a ratio of 1:1, stir well and pour it into a watering can; Then spray the liquid into the crevices; Brush with a toothbrush.

The cleaning effect is good, and it has a certain effect on oil stains and mildew.

Fourth, alcohol cleaning. Prepare alcohol, gauze, cards. Pour alcohol into the bowl, soak in a piece of gauze, wring it out, and wrap the card in the gauze (the refrigerator adhesive strip has many gaps, which is difficult to clean with a rag, so you need to use the card).

Wiped back and forth, and all the dirt stuck to the gauze. Alcohol can clean the adhesive strip because it also has a strong decontamination effect, it can also volatilize quickly, and it also has the effect of inhibiting and sterilizing.

Stuffing a roll of toilet paper in the fridge is amazing, and it can easily save hundreds, which is really an eye-opener!

You can remove it and wash it, if it is not convenient to dismantle, wipe it with a towel, and you can put dish soap on the towel.

This can only be removed and washed again, don't be annoyed, simple treatment will only make the next dirty come early.

The rubber strip on the side of the refrigerator is dirty and black, and you can use a towel and white vinegar to wipe it off, which can not only sterilize but also remove odor, making it as clean as new.

The rubber strip on the side of the refrigerator is made of rubber leather, if it turns black and dirty, you can use a rag with a thin steel wire to wash the dishes with dish soap, and it must be dried after washing, otherwise it will turn yellow.

The rubber strip on the side of the refrigerator is dirty and black, just take it down and wash it, and dry it after washing. Wash frequently when you are cleaning.

In fact, you can use lemon to clean it at ordinary times, then it will have a good cleaning effect, and you should pay attention to cleaning work at ordinary times.

It should be removed and cleaned regularly, and the hygiene of the refrigerator should also be paid attention to, after all, it is a place to eat, which is related to the health of the family.

The rubber strip on the side of the refrigerator is easy to get dirty and black, so we must clean it many times and scrub it frequently, so that it can be as clean as new.

Wash with a special detergent or wash with dish soap. First of all, you have to soak it in a hot water basin for a short time, pour detergent into the process of soaking, and then wash it.

The alley on the side of the refrigerator is focused, if it is not cleaned up in time, it will become dirty and black, we can take it off and wash it well with hot water and dish soap.

The refrigerator is a must-have appliance in every house, especially in the summer, its usage rate is even higher, but many people have encountered this problem when using it, that is, the refrigerator strip is dirty at every turn, so how to clean the refrigerator plastic strip dirty? Teach you how to learn it quickly.

The first method that comes to mind is to use the toothpaste that everyone has to clean it, the operation method is as follows: apply the toothpaste to the moldy area in the refrigerator adhesive strip, wait for 2-3 minutes, find an old toothbrush, dip it in water and gently brush off the mold with toothpaste, and the mold will be easily brushed off. Finally, wash it with water and wipe it with a dry rag.

The second is to use vinegar, vinegar has a good effect of removing mildew, vinegar and water are diluted at 1:5, and then add dishwashing liquid, and then use a dry rag or old toothbrush dipped in vinegar water to gently wipe the mildew spots on the gums, it will be easy for us to wipe off, very simple and practical.

If we notice that the seal on our fridge is moldy, we can use toothpaste to help clean it. First, apply the toothpaste to the moldy area of the seal. After a while, gently wipe with a towel or soft cloth (be careful not to pull the seal too hard to avoid deformation and loose seal), then wash with clean water.

The sealing strip on the refrigerator is often black and moldy, and sometimes it has a peculiar smell and smell. In this case, we can wash with diluted Clorox bleach. Clorox bleach with water 1:

99 diluted and wiped off with a towel. After wiping, the sealing strip is white, bright and odorless.

When we clean the mold, the seal is often deformed and the seal is loose. At this time, we can use a hair dryer to help it recover. The operation is very simple, directly use a hair dryer to maximize the hot air, and after a few minutes the seal will soften and return to its original state, and then it can be fixed on the refrigerator.

First of all, the first method used is our most common thing, that is, toothpaste, in addition to cleaning our teeth well, the refrigerator strip also has a good cleaning effect, apply the toothpaste to the moldy place in the refrigerator strip, wait for 2-3 minutes, find an old toothbrush, dip it in water and gently brush off the mold with toothpaste, then the mold is easy to brush off. Finally, wash it with water and wipe it with a dry rag.

The second method is also used in our common things - vinegar, vinegar has a good effect on mildew, vinegar and water are diluted in a ratio of 1:5, and then add dish soap, and then take a dry rag or an old toothbrush dipped in vinegar water to gently wipe the mold of the rubber strip, and the mildew will be easily wiped off by us, which is very simple and practical.

Teach you how to fix refrigerator seals.

Brush it clean with a brush first, and then dry it with a towel!