How to clean the moldy refrigerator seal

Here's how:

1. Clean with toothpaste. Start by squeezing the toothpaste, apply it to the moldy area of the strip, wait a few minutes, and wipe it with a damp towel or paper. Rinse with tap water.

2. Clean with alkaline-containing substances. We can clean it with alkaline substances, similar to alkaline noodles. Pour a spoonful of alkaline noodles on top of the moldy strips, and after a while, pour some tap water and wipe it.

3. Wash with alcohol. Use chopsticks dipped in alcohol to wipe back and forth on the moldy part of the rubber strip of the refrigerator, and then wipe it evenly with a paper towel, we can see that it is stained with stains. Then wash with clean water and you're done.

4. Wash with vinegar. We all know that vinegar is an acidic substance, and it can be reacted with moldy substances, rubbed back and forth on the moldy area with a cloth dipped in vinegar, and finally washed with water.

5. Laundry detergent cleaning. We know that household laundry detergent can remove stains, so after washing the clothes, we can use laundry detergent to wipe the mold.

6. Detergent. Detergent is generally used to wash dishes, of course, it can play a role in sterilization and cleaning, which is also a quick way.

The method of cleaning the moldy sealing strip of the refrigerator is as follows

1. Refrigerator users can apply toothpaste to the refrigerator sealing strip, and then stagnate, about a minute or so, you can use a towel and rag to wipe it, and then clean it with water, so that the dirt caused by the mold of the refrigerator sealing strip will be completely removed.

2. Vinegar can also be used to clean off the mold of the refrigerator sealing strip, and the ingredients in the vinegar and mildew will have a chemical reaction, and the residue must be wiped clean after cleaning with vinegar. Vinegar not only has this effect, but also kills bacteria on the refrigerator seal.

3. You can use an old toothbrush to dip a little dish soap to remove the mildew of the refrigerator seal, so that the cleaning effect is more thorough, and at the same time, it can also remove the odor on the refrigerator seal, which can be described as killing two birds with one stone, you may wish to give it a try.

4. Mix bleach with water in a ratio of 1:99, and then apply the mixture to the refrigerator seal, which can not only clean off the mildew on the paint, but also make the long-term yellowing of the seal look new.

1. Toothpaste cleaning method: squeeze the toothpaste on the moldy position on the Mi Li Kai seal, stay for 3 5 minutes, wipe gently with a soft cloth, and pay attention to gently wipe when cleaning, do not use force, so as to avoid the seal is not strict, and then use clean water to clean the sail.

2. Vinegar cleaning method: you can soak the towel in vinegar, then take out the towel, wipe it on the moldy position, and also use it to clean the inside of the washing machine, which can play the role of decontamination and mildew removal, and also has the effect of sterilization and odor removal.

3. Clorox bleach cleaning method: the inner seal of the washing machine will be moldy after a long time, and there will be blackening, and even the smell will appear in serious cases, in this case, it will be difficult to clean, you can use Clorox bleach to clean, the ratio of Clorox bleach and water is 1:99, and then wipe it lightly with a towel, and you can find that the refrigerator seal is white and bright after wiping.

4. The wonderful use of the hair dryer: many people will find that the sealing strip is somewhat deformed after cleaning the refrigerator sealing strip, and the sealing is not tight, so you need to use a hair dryer to help the sealing strip restore its original state, the operation is very simple, that is, use which laugh to blow the hot wind sealing strip, and it will return to its original state after blowing it for a few minutes.

Method 1: You can apply toothpaste to the moldy part of the sealing strip of the refrigerator, wait for about 1 minute, we can gently wipe it with a clean towel, and then wash it again with water, then you will find that the previous mold is gone, and the refrigerator is as clean as new.

Method 2: Vinegar can also clean off the mildew of the refrigerator seal, because the composition of vinegar and mildew will have a chemical reaction, we must carefully wipe it clean, and vinegar also has the effect of sterilization.

The above are the two cleaning methods for moldy refrigerator seals, I hope it can help you, thanks (

We all have old toothbrushes that we don't use at home, and you can use a toothbrush dipped in dish soap to scrub the mold, in fact, this effect is more obvious, and the odor of the refrigerator will also be effectively removed, you can try it. You can also use bleach to clean, pay attention to the ratio of it to water is 1:99, and evenly apply the mixed liquid to the moldy area, and the mold on the refrigerator seal will be removed.

The refrigerator is an indispensable household appliance in our lives, which can help us preserve food, avoid food spoilage, and protect the health of our family. However, because refrigerator seals are in a humid, airtight environment, they are susceptible to mold attack, resulting in mold, which can pose a risk to home health if not cleaned in time. Below, we will introduce some ways to clean the moldy refrigerator seal.

1.Ginger cleansing.

First of all, use a clean cloth or sponge to wipe the mold on the refrigerator seal, then cut the ginger into small pieces, wipe the small pieces of ginger along the seal, and at the same time add some white vinegar to make the moisture dry. This kills mold and removes odors.

2.Detergent cleaning method.

This cleaning method is suitable for more serious mildew situations, first remove the mold on the refrigerator seal, and then you can use some mild detergent, pour it into water, fully dissolve, and soak the seal. This removes stubborn mildew and allows the seal to dry before wiping it clean with a clean cloth.

3.Alcohol cleansing.

Add a small amount of alcohol to the cleaning process, which effectively removes mold and kills bacteria. First, clean the refrigerator seal with a dry cloth and wipe it thoroughly, then use a brush to dip some alcohol and gently wipe the mold on the seal. Remember not to overuse alcohol to prevent damage to the seal.

4.Soda cleaning method.

Sparkling water is a common cleaning agent, it can kill bacteria and roots, and it also has a good effect on the odor inside the refrigerator. Dissolve the baking soda powder in hot water until the concentration is moderate, then dip the soda with a brush or a chierli sponge, wash the inside of the seal and refrigerator thoroughly, and finally wipe it clean with water.

In conclusion, there are many ways to clean a refrigerator seal for mold, but different situations require different methods. In everyday life, it is important to keep the refrigerator dry and do not let water droplets stay on the seal, so that mold growth can be prevented. At the same time, clean your refrigerator regularly to keep it clean and hygienic.

The cause of mold in the refrigerator can be due to high humidity or food debris that is not cleaned up in time. Here's how to clean your fridge from mold:

1.Empty the refrigerator: Remove all food and beverages from the refrigerator and place in a dry place.

2.Disassemble refrigerator parts: Take out the detachable parts of the refrigerator, such as drawers, shelves, storage boxes, etc., and clean them with warm water and soap.

3.Cleaning the inside of the refrigerator: Wash the inside of the refrigerator with warm water and soap, especially in the corners and crevices. You can use a toothbrush or sponge to clean.

4.Disinfection: Wipe the inner wall and parts of the refrigerator with disinfectant liquid or vinegar water, which can effectively kill the blind and prevent the growth of mold.

5.Drying: Dry the inside of the refrigerator and parts with a clean towel or paper towel to make sure they are completely dry.

The cause of mold in the refrigerator seal may be due to high humidity or not being cleaned for a long time. Here's how to clean your fridge seal if it's moldy:

1.Wash the seal with warm water and soap: Wash the seal with warm water and soap, especially in the gaps of the seal. You can use a toothbrush or sponge to clean.

2.Disinfection: Wipe the seal with disinfectant or vinegar water, which can effectively sterilize and prevent mold growth.

3.Drying: Dry the seal with a clean towel or paper towel to make sure it is completely dry.

4.Keep it dry: During the use of the refrigerator, keep the inside of the refrigerator dry and avoid excessive humidity, which can effectively prevent the seal from mold.

The first trick: toothpaste.

When the seal on the refrigerator door becomes moldy, we can use toothpaste to help clean it. First apply the toothpaste to the moldy area of the sealing strip, wait for a while, gently wipe it with a towel or soft cloth (be careful not to pull the sealing strip too hard to prevent deformation and loose sealing), and then wash it with water.

The second trick: vinegar.

We can use daily vinegar to clean the moldy sealing strip of the refrigerator, and we can also clean the inside of the refrigerator, which can not only remove stains and mildew, but also disinfect, sterilize and remove odor. It is also safe and effective than placing a refrigerator deodorant.

Other methods. Sometimes the seal will not only become moldy, but also turn yellow, black and smelly, so we can use diluted Clorox bleach to clean it. Dilute Clorox bleach with water at a ratio of 1:99 and wipe with a towel wet.

After wiping, the seal will be white, shiny and odorless.

Many people say that after wiping the seal, the seal will be deformed and not tightly sealed, and we can use a hair dryer to help it recover. The operation is very simple, directly use the hair dryer to blow the maximum hot air, and after a few minutes, the sealing strip will become soft and return to its original shape, then it can be fixed on the refrigerator.

First of all, vinegar seems to help.

We can use daily vinegar to clean the moldy sealing strip of the refrigerator and the inside of the refrigerator, which can not only remove stains and mildew, but also sterilize and deodorize. Safer and more effective than refrigerator deodorant.

Second, toothpaste helps.

When the seal on the refrigerator door is moldy, we can use toothpaste to help clean it up. Apply toothpaste to the moldy part of the seal, wait for a while, then gently wipe it with a towel or soft cloth (be careful not to pull the seal too hard to prevent deformation and loosening of the seal), and then wash it with clean water.

Third, use a hair dryer to help.

Many people say that after wiping the seal, the seal will be deformed and the seal will not be tight. At this time, we can use a hair dryer to help it recover. The operation is simple.

Blow directly with the hot air of a hair dryer. After a few minutes, the seal will soften and return to its original shape. Then fix it on the refrigerator.

Four. Diluted Goliath bleach.

Sometimes the seals not only become moldy, but also turn yellow, black, and smelly. At this time, we can use diluted Goliath bleach to clean. Place Goliath's bleach with water at 1:

Dilute at a ratio of 99, then soak and wipe with a towel. When wiped, the seal will be white, shiny, and odorless.

Verb (abbreviation of verb) for cleaning methods elsewhere.

Many of the door mats in refrigerators are made of grooves. When black spots and stains appear in the grooves, you can wipe them with an old toothbrush dipped in dish soap and then dry them with a dry cloth. Stains on the refrigerator casing are particularly difficult to clean.

At this time, you can use a sponge or towel dipped in a little dish soap, wipe for a minute, and then use a dry cloth to dry the water stains.