How do you measure the number of switches and sockets before renovating?

The number and position of switches should be done well before the transformation, because a lot of homework in the early stage is not enough, and there will be a feeling that the socket is not so annoying to use after the transformation. Because there will always be a variety of smart appliances in the future life, if you install less, you will need a variety of cables. So here we share the number of installations and positioning schemes of a set of switches and sockets, which can be appropriately increased or decreased according to their own needs.

In our lives, we can't do without switches and sockets. So what do professionals think about the distribution of switches and sockets? Through the tour, we gave them a list of the layout of the switch sockets in the whole house, so we had to pay attention to how we needed to determine the distribution.

The entrance is an essential area for every home. However, few people install sockets at the entrance, but they don't know that they may use shoe dryers in their later lives, so it is recommended that everyone consider installing sockets. Here you can follow the relevant switch socket.

Don't miss this place when we install it. Install a dual control switch to control the living room lights, which is easy to use. Pay special attention to the location and number of five holes on both sides of the TV and sofa, so as to facilitate the use of electrical appliances such as TVs, floor lamps, and water dispensers.

If you want to buy a few corners, the owner should also consider the socket layout here.

Also, it needs to be installed here. It was a "concentration camp" for kitchen appliances. First, install the five-pin plug of the range hood on the countertop, and then use common appliances such as rice cookers, soy milk makers, and kettles.

It is recommended to choose an outlet with a built-in throttle protection. Socket rotation protection, no oil stains, clean and hygienic. Under the countertop, consider household appliances such as water purifiers, kitchen treasures, and disinfection cabinets.

and install multiple five-hole plugs for ease of use.

The number of switches depends on the lights in each room, whether it needs to be switched on and off more than once, such as the lights in the bedroom, the door is open, and the bed is closed before going to bed. You should consider the socket configuration of ordinary household appliances. For large ones, the first thing to consider is the right location, such as air conditioner refrigerator, etc.

For the kitchen, it is also necessary to arrange the location of use first, and then decide on the number of outlets. These can be marked with chalk in each room first, whether it is convenient to use, whether the location of household appliances is properly arranged, and how to leave some margin in the socket. After all, the number of household appliances increases over time.

First of all there are definitely two sockets and a switch in a room, and then you look at how many rooms there are. Secondly, it is necessary to consider how many switches and sockets there should be in the living room, for example, two switches and three or four sockets should be pressed in the living room.

I think you can think about it, there must be at least two switches and sockets in each bedroom, one in the dining room, and two in the kitchen, so that you can estimate it.

It can be estimated according to the number of rooms and the electrical appliances used, so it is especially convenient for future use.

The number and location of switches and sockets should indeed be done well before decoration, because a lot of preliminary homework is not enough, and after the decoration is completed, there will be a feeling that the socket is less when it is used. Because there will always be a variety of smart appliances in the future life, and if you install less, you will need all kinds of cable sockets.

To decorate a house, the first thing is that the owner himself feels comfortable and relaxed while living in it. Therefore, the location of the electrical switch and socket in the room and the number of the number of the need for the homeowner and the designer to communicate more before the decoration, the homeowner had better imagine their future life and special hobbies in their minds in advance, and the envisaged furniture layout and special requirements to the designer (plumber) to explain clearly, the designer according to the owner's own vision plus their professional technical knowledge to draw the layout of the whole house switch and socket, and the owner again to communicate and position, and then according to the drawings in the blank wall 1:1 positioning, And after the plumber gave the bottom-up, the construction was started.

Designers or plumbers should have relatively standard and practical industry standards for the height of various switches and sockets.

So here is a set of switch socket installation number location scheme, you can increase or decrease according to your own needs.

1. Entrance. <>

2. Living room. There will be more sockets in the living room, and the current life tends to be intelligent, sweeping robots, air purifiers, air conditioners, tea burners, etc., usually the sockets in the living room are easy to have more and are not less reliable.

3. Kitchen. In addition to the need for a large number of sockets in the living room, the kitchen is also a gathering place for electrical appliances, refrigerators, ovens, dishwashers, garbage disposers, water purifiers, etc.

4. Bathroom. The socket in the bathroom needs to be equipped with a splash-proof and moisture-proof cover, because there is more water vapor in this space, and the electricity needs to be safer.

5. Bedroom. The approximate location of the electrical appliances in each room. Install it on the same horizontal line as much as possible, except for special locations, for example, the sockets on both sides of the bedside table cannot be covered by the bedside table, the socket under the toilet is used to install the smart toilet, and the socket under the kitchen cabinet is left to facilitate the installation of water purifiers. Bedchamber.

I think the first thing to judge by the height of the furniture you buy, for example, the crab in the refrigerator can reach the longest **, and the placement of these furniture should be planned in advance, and try to leave more sockets.

When decorating, observe the overall layout and pattern of the home, and then formulate the home decoration design drawing, and determine the location and number of switches and sockets according to the information on the design drawing.

It needs to be determined according to the style of decoration, the socket installed in the kitchen, the location of the dishwasher and refrigerator, and the location of the sweeping robot and air conditioner in the living room.

Determined according to the decoration style. When installing at the kitchen socket, you must pay attention to the position of the dishwasher and refrigerator, and the living room must pay attention to the position of the sweeping machine and air conditioner.

Recommended number of switches and sockets:

a) Master bedroom.

Dual control switch: 2 (master bedroom ceiling light, bedroom double control switch is very necessary, don't save this money, try to double control each bedroom).

5-pin sockets: 4 (two bedside lamps, TV reserved, spare sockets).

3-hole 16A socket: 1 (air conditioner, this does not need to have a switch, now there is bus control in the room, just turn off the air conditioner separately when not in use).

Cable TV socket: 1 ** network cable socket: 1 pc.

b) Second bedroom.

Dual control switches: 2 (second bedroom overhead lights).

5-pin sockets: 3 (2 bedside lamps, spare sockets).

3-pin 16a socket: 1 pc (air conditioner).

**Ethernet cable socket: 1 pc.

c) Study. Single switch: 1 (study roof light).

5-pin sockets: 3 (desk lamp, computer, spare socket).

3-pin socket 16A: 1 pc (air conditioner).

**Ethernet cable socket: 1 pc.

d) Living room. Dual control switches: 2 (living room top lights, some living rooms are far away from the entrance door, and you have to run to the door every day when you turn off the lights, so it will be very convenient to make a double control).

Single switch: 1 (entrance light).

5-pin sockets: 7 (TV, water dispenser, ***, spare sockets, etc.).

3-pin socket 16A: 1 pc (air conditioner).

**Ethernet cable socket: 1 pc.

TV wired socket: 1 pc.

5) Restaurants. Duplex switch: 1 (dining room ceiling light, kitchen ceiling light).

5-pin socket: 1 (spare socket).

Open 3-pin socket: 1 (refrigerator).

6) Kitchen. 5-pin sockets: 3 (rice cooker, spare socket 2)

3-pin sockets: 3 (range hood, 2 spare sockets).

One open 3-hole 10A socket: 2 (small kitchen treasure, microwave oven).

1 open 3-hole 16A socket: 2 (induction cooker, oven).

One open 5-pin socket: 1 pc.

vii) Balconies. Single switch: 1 (balcony ceiling light).

5-pin socket: 1 (spare socket).

8) Master bathroom.

Single switch: 1 (toilet ceiling light).

1 open 5-pin socket: 1 (washing machine and hair dryer).

One open three holes 16a: 1 (water heater).

Waterproof box: 2 (washing machine and water heater, the bathroom is more humid, use a waterproof box to protect the socket, it is safer).

9) toilets.

Single switch: 1 (toilet ceiling light).

Open 5-pin socket: 1 (hair dryer).

Waterproof case: 1 pc (hair dryer).

x) Corridors. Dual control switches: 2 (corridor top light, if the corridor is not long, one ordinary single opening is OK).

Whiteboards: 10.

Adjust it appropriately according to your own situation.

Notes:

1. The module behind the network cable socket is generally a unified standard, in case you encounter a special, please pay attention to take a look at the module behind it.

2. The more sockets in the kitchen, the better, and the actual use should be considered.

3. All the switches and sockets on the wall, if you can use them, install them, and install the whiteboard if you don't need them.

4. When wiring the study, you must consider the location of the desk and the network cable.

Living room: The living room is an activity area, mainly around the sofa and TV, and probably requires 5-6 sockets.

1. 2 TV sockets.

2. 1 air conditioning socket (** air conditioning can be omitted).

3. One on each side of the sofa socket.

4. Reserve 1-2 sockets in the corner (vacuum cleaners and other mobile appliances) Bedroom: In addition to the bed, there is also a desk in the bedroom, which is about 8.

1. One on each side of the bed, for mobile phone charging or desk lamp.

2. Two TV sockets (no TV in the bedroom can be omitted).

3. 1 air conditioning socket (** air conditioning can be omitted).

4. Two desk sockets, computer and desk lamp (desk can be omitted in the study) 5. Two dressers, used for mobile phone charging and desk lamp.

6. Plug in a network cable.

Kitchen: The kitchen has all kinds of small appliances and needs 7-8 sockets.

1. 1 range hood socket.

2. 1 microwave oven socket.

3. 1 refrigerator socket (refrigerator can be omitted in the restaurant).

4. There are 2-3 sockets on the operating table, which are used for small electrical appliances such as hot water kettles 5. 1 socket on the side of the sink to facilitate the installation of small water heaters.

6. 1 socket under the stove for the replacement stove.

The best layout method for new house switches and sockets! The number of locations is clear at a glance, and I regret not seeing it before the renovation!

Restaurant: Although the restaurant is only used for eating, it also needs 4-5 sockets 1 and an air conditioning socket (air conditioning can be omitted in the kitchen).

2. There are two dining table sockets, one for induction cooker hot pot, one for electric fan 3, and one for water dispenser socket.

Bathroom: 1. 1 water heater socket.

2. 1 washing machine socket (the washing machine can be omitted when placed on the balcony).

3. 1 mirror socket for hair dryer.

4. 1 toilet side socket for mobile phone charging.

How to arrange reasonably during decoration, the location and number of switches and sockets.