How to determine the number and location of switches and sockets during home renovation?

The number and location of switches and sockets should indeed be done well before decoration, because a lot of preliminary homework is not enough, and after the decoration is completed, there will be a feeling that the socket is less when it is used. Because there will always be a variety of smart appliances in the future life, and if you install less, you will need all kinds of cable sockets.

To decorate a house, the first thing is that the owner himself feels comfortable and relaxed while living in it. Therefore, the location of the electrical switch and socket in the room and the number of the number of the need for the homeowner and the designer to communicate more before the decoration, the homeowner had better imagine their future life and special hobbies in their minds in advance, and the envisaged furniture layout and special requirements to the designer (plumber) to explain clearly, the designer according to the owner's own vision plus their professional technical knowledge to draw the layout of the whole house switch and socket, and the owner again to communicate and position, and then according to the drawings in the blank wall 1:1 positioning, And after the plumber gave the bottom-up, the construction was started.

Designers or plumbers should have relatively standard and practical industry standards for the height of various switches and sockets.

So here is a set of switch socket installation number location scheme, you can increase or decrease according to your own needs.

1. Entrance. <>

2. Living room. There will be more sockets in the living room, and the current life tends to be intelligent, sweeping robots, air purifiers, air conditioners, tea burners, etc., usually the sockets in the living room are easy to have more and are not less reliable.

3. Kitchen. In addition to the need for a large number of sockets in the living room, the kitchen is also a gathering place for electrical appliances, refrigerators, ovens, dishwashers, garbage disposers, water purifiers, etc.

4. Bathroom. The socket in the bathroom needs to be equipped with a splash-proof and moisture-proof cover, because there is more water vapor in this space, and the electricity needs to be safer.

5. Bedroom. The approximate location of the electrical appliances in each room. Install it on the same horizontal line as much as possible, except for special locations, for example, the sockets on both sides of the bedside table cannot be covered by the bedside table, the socket under the toilet is used to install the smart toilet, and the socket under the kitchen cabinet is left to facilitate the installation of water purifiers. Bedchamber.

I think the first thing to judge by the height of the furniture you buy, for example, the crab in the refrigerator can reach the longest **, and the placement of these furniture should be planned in advance, and try to leave more sockets.

When decorating, observe the overall layout and pattern of the home, and then formulate the home decoration design drawing, and determine the location and number of switches and sockets according to the information on the design drawing.

It needs to be determined according to the style of decoration, the socket installed in the kitchen, the location of the dishwasher and refrigerator, and the location of the sweeping robot and air conditioner in the living room.

Determined according to the decoration style. When installing at the kitchen socket, you must pay attention to the position of the dishwasher and refrigerator, and the living room must pay attention to the position of the sweeping machine and air conditioner.

In everyday life, sockets can be found everywhere. So the question is, do you know what is the location and number of decoration sockets? Where should the switch and socket be installed during decoration? Next, let me give you a brief introduction.

1.The video wall should be fitted with 2 to 3 five-pin sockets 300 mm above the ground. Of course, if it is a wall-mounted LCD TV, you need to install one behind the TV, otherwise the wires hanging on the wall will affect the overall aesthetics.

2.Install a five-pin socket at the back of the refrigerator, 300 mm above the ground.

3.Next to the air conditioner, a 16A three-pin socket should be installed, 1800 mm above the ground.

4.1 to 2 five-pin sockets should be installed under the computer desk, 300 mm above the ground, and a wiring strip will definitely be equipped in the future.

5.Microwave ovens, rice cookers and other hanging cabinets need to be installed with 2 to 3 five-pin sockets.

6.Install a five-pin socket next to the range hood.

7.Install a five-pin socket next to the water dispenser, 300 mm above the ground.

8.A five-hole socket is installed on each side of the head of the bed, 300 mm above the ground. Round-up.

How to determine the number and location of switches and sockets.

Determining the number and location of switches, sockets should first consider three aspects:

Clause. 1. The role that each room needs to play in the future. For example: which is the master bedroom, the second bedroom and the study, etc.;

Clause. 2. The location and approximate size of large household appliances and furniture, such as TVs, refrigerators and cabinets;

Clause. 3. According to the living habits of the family. If you prefer to watch TV while eating, you should consider installing a wired outlet in your restaurant.

Preliminary considerations regarding the number of sockets in each natural room:

1) Master bedroom: bedside lamp, air conditioner, cable TV, floor lamp and digital product charging, etc.;

2) Second bedroom: air conditioning, etc.;

3) Study: desk lamp, computer, speaker, air conditioner and other small electrical appliances, etc.;

4) Living room: TV, air conditioner, floor lamp, ** and cable TV, etc.;

5) Bathroom: washing machine, hair dryer and electric water heater, etc.;

6) Kitchen: refrigerator, microwave oven, induction cooker, soybean milk machine and range hood, etc.

Summary: After reading the above introduction, I believe you have a further understanding of the location and number of decoration sockets. If you want to know more about it, please continue to ******, and we will present you with more wonderful Tonghu finger content in the future.

The living room switch uses a lighting; As for the socket, it is recommended to arrange it this way, leave 2 next to the TV, for the set-top box, router use, and take into account other equipment, you can reserve another 1-2. Secondly, install one three-pin socket for the air conditioner, one on each side of the sofa for floor lamps and mobile phone charging.

2. Entrance

There is a dual-control switch for lighting in the hallway, and a five-pin socket is reserved for emergencies, such as charging electric vehicles in some households.

3. Restaurant

1 x 10A 3-pin socket, refrigerator plugged in; 1 x 10A 5-pin socket for use by sweeping robots; 2 x 10A 5-pin sockets, installed next to the dining table.

4. Balcony

2 x 10A 5-pin sockets for pre-loading washing machines, treadmills, fish tanks, etc.

5. Kitchen

1 x 10A 3-pin socket, 1 x 10A 5-pin socket for range hood or refrigerator; 1 x 16A 3-hole, 3 x 10A 5-hole rice cookers, soymilk maker, microwave oven, etc.

6. Bedroom

The bedroom needs 2 switches, one for the door and one for the bedside control; 6 sockets, one with three holes for air conditioning, two on each side of the bed for desk lamps and mobile phone charging, and the other at the foot of the bed for TV or other electrical appliances.

7. Bathroom

1 x 10A 5-pin socket for smart toilet use; 2 x 10A 5-pin sockets, hair dryer, shaver, etc.

8. Study

5 x 10A 5-pin sockets, computer, monitor, audio, etc.; 1 x 16A 3-pin socket for cavity air conditioner, etc.

The number and position of switches should be done well before the transformation, because a lot of homework in the early stage is not enough, and there will be a feeling that the socket is not so annoying to use after the transformation. Because there will always be a variety of smart appliances in the future life, if you install less, you will need a variety of cables. So here we share the number of installations and positioning schemes of a set of switches and sockets, which can be appropriately increased or decreased according to their own needs.

In our lives, we can't do without switches and sockets. So what do professionals think about the distribution of switches and sockets? Through the tour, we gave them a list of the layout of the switch sockets in the whole house, so we had to pay attention to how we needed to determine the distribution.

The entrance is an essential area for every home. However, few people install sockets at the entrance, but they don't know that they may use shoe dryers in their later lives, so it is recommended that everyone consider installing sockets. Here you can follow the relevant switch socket.

Don't miss this place when we install it. Install a dual control switch to control the living room lights, which is easy to use. Pay special attention to the location and number of five holes on both sides of the TV and sofa, so as to facilitate the use of electrical appliances such as TVs, floor lamps, and water dispensers.

If you want to buy a few corners, the owner should also consider the socket layout here.

Also, it needs to be installed here. It was a "concentration camp" for kitchen appliances. First, install the five-pin plug of the range hood on the countertop, and then use common appliances such as rice cookers, soy milk makers, and kettles.

It is recommended to choose an outlet with a built-in throttle protection. Socket rotation protection, no oil stains, clean and hygienic. Under the countertop, consider household appliances such as water purifiers, kitchen treasures, and disinfection cabinets.

and install multiple five-hole plugs for ease of use.

The number of switches depends on the lights in each room, whether it needs to be switched on and off more than once, such as the lights in the bedroom, the door is open, and the bed is closed before going to bed. You should consider the socket configuration of ordinary household appliances. For large ones, the first thing to consider is the right location, such as air conditioner refrigerator, etc.

For the kitchen, it is also necessary to arrange the location of use first, and then decide on the number of outlets. These can be marked with chalk in each room first, whether it is convenient to use, whether the location of household appliances is properly arranged, and how to leave some margin in the socket. After all, the number of household appliances increases over time.

First of all there are definitely two sockets and a switch in a room, and then you look at how many rooms there are. Secondly, it is necessary to consider how many switches and sockets there should be in the living room, for example, two switches and three or four sockets should be pressed in the living room.

I think you can think about it, there must be at least two switches and sockets in each bedroom, one in the dining room, and two in the kitchen, so that you can estimate it.

It can be estimated according to the number of rooms and the electrical appliances used, so it is especially convenient for future use.

The layout of home improvement switches will affect the future use, so we must reserve the position of the switch socket when decorating, and the following is a brief understanding.

Home improvement switch socket arrangement.

1. Master bedroom.

Switch: 1 (master bedroom overhead light).

Sockets: 6 (two bedside lamps, air conditioner, **, TV, floor lamp).

2. Second bedroom (children's room).

Switch: 1 (second bedroom ceiling light).

Sockets: 4 (air conditioner, **, desk lamp socket, spare socket).

3. Study switch: 1 (study roof light).

Sockets: 6 (network port, air conditioner, **, study lamp, computer, spare socket).

4. Guest hall switch: 1 (guest hall ceiling light).

Sockets: 6 (TV, water dispenser, air conditioner, **, floor lamp, spare socket).

5. Bathroom.

Switches: 2 (bathroom ceiling light, exhaust fan or bath bomb).

Sockets: 4 (washing machine, hair dryer, electric water heater, **)

6. Kitchen (kitchen and dining room in one).

Switches: 2 (kitchen ceiling light, dining room ceiling light).

Sockets: 7 (refrigerator, range hood, kitchen slipper, microwave oven, shabu-shabu socket next to the dining table, up to two spare sockets on the countertop).

7. Balcony: switch: 1 (balcony top light).

Outlet: 1 (spare outlet).

The same inkstones can make appropriate adjustments according to their own needs. For example, in my house, except for the kitchen balcony, there is no light on the bedroom balcony and the living room balcony, nor does there be an outlet.

The installation height of the home improvement switch.

Generally, the switch is opened and closed with a hand in the opposite direction, and the right hand is more than the left hand. Therefore, most of the switches in the home are installed on the left side of the door, so that it is convenient to open with the right hand after entering the door. Conform to the logic of behavior.

Generally, the installation height of the home switch should be meters from the ground.

The installation height of the cable switch from the ground is required to be 2 meters.

The installation height of the exposed socket from the ground is required to be meters.

The concealed socket is required to be meters from the ground.

According to the national standard, it is necessary to reserve a socket for about meters.

When the two-pin socket is wired, "left zero and right fire" is distributed up and down, "lower zero and upper fire", and the three-pin socket is "left zero and right fire, and the ground wire is connected". Precautions for the installation of home improvement switches.

1. Generally, the standards of the module behind the network cable socket are unified, if you encounter a special, please pay attention to the module style behind it.

2. The more undefeated kitchen sockets are the better, and the actual use should be considered.

3. All the switches and sockets on the wall, if you can use them, install them, and install the whiteboard if you don't need them, don't plug them, so that you can leave a manhole for the weigher in the future.

4. When wiring in the study, it must be routed according to the position of the desk and the network cable.