Can you use the same wire for bathroom socket box kitchen socket? Thank you

Updated on home 2024-06-29
15 answers
  1. Anonymous users2024-02-12

    As long as the load on the wires is sufficient, it doesn't matter. You can share a line.

  2. Anonymous users2024-02-11

    The bathroom socket box and the kitchen socket can use the same wire, but not high-power appliances at the same time.

  3. Anonymous users2024-02-10

    It is best not to share a line between the socket of the bathroom and the kitchen, because the bathroom has shower gel, electric water heater, etc., and the kitchen has an induction cooker, electric wok, microwave oven, etc., which are all household high-power electrical appliances.

  4. Anonymous users2024-02-09

    Generally, the same power cord cannot be used. In the distribution box of the user's home, there is generally a separate road for the kitchen and a separate road for the bathroom.

    The living room and bedroom are separate all the way.

    And all of them are added with leakage protection, such as the bathroom and kitchen road, which may trip because the current is too large.

  5. Anonymous users2024-02-08

    Because the power of the electrical appliances in the bathroom and kitchen is relatively large, it is not recommended that you use the same line, if you have to use the same line, the main line of the socket should be larger, I hope it can help you.

  6. Anonymous users2024-02-07

    1. The bathroom socket box kitchen socket can use the same line, provided that it is thick enough, 2. But generally speaking, it is recommended that the bathroom and kitchen do not use a line, it is best to run the line separately, the kitchen alone all the way, and the bathroom alone all the way.

    3. It does not affect each other during maintenance.

  7. Anonymous users2024-02-06

    The bathroom and kitchen are generally not in the same direction, and generally speaking, there are many household appliances, so the bathroom and kitchen should not use a line, it is best to run the line separately.

  8. Anonymous users2024-02-05

    Bathrooms and kitchens will use high-power appliances, if it is the first decoration, it is best to separate the wiring, if you use the same line should choose 6 square millimeters of copper wire, you can bring 7 to 8 kilowatts of load, OK. Remember to choose the leakage protection automatic switch.

  9. Anonymous users2024-02-04

    In general, this is not recommended. In my case, if there is an electrical failure, I can't be sure that it is the first electrical failure.

    In general, an electrician or wiring master knows how to wiring the wiring.

  10. Anonymous users2024-02-03

    Yes, you can use the same line.

  11. Anonymous users2024-02-02

    Nowadays, the electrical appliances in the bathroom are relatively powerful, such as bath bombs, hair dryers, water heaters, etc. There are also a lot of electrical appliances in the kitchen, and it is recommended to use separate copper wires of not less than 4 square millimeters for the bathroom and kitchen.

  12. Anonymous users2024-02-01

    Depending on how much power electrical appliances are used, it is okay not to overload.

  13. Anonymous users2024-01-31

    Summary. Hello, about your question, I think in our home decoration process, home decoration water and electricity renovation can be described as a key project, because it is closely related to the daily life after decoration, for us, if we do not understand the installation and modification of water and electricity need to pay attention to what problems, it will bring a lot of difficulties to the decoration or decoration after acceptance. Generally, the square socket is enough, and high-power appliances such as air conditioners, water heaters, and other high-power appliances need to be connected to 4 square wires separately.

    Embedded wires in new homes are generally yes. Each house is different, if necessary, you can ask the developer or open the wiring box yourself to measure.

    Hello, about your question I think the kitchen can add an outlet to be wired in the same place.

    Hello, about your question I think in our home decoration process, home decoration water and electricity renovation can be described as a key Huai Shen project, because it is closely related to the daily life after decoration, for us, if we do not understand the installation and modification of water and electricity need to pay attention to what problems, it will bring a lot of difficulties to the decoration or the acceptance of the decoration of the concise bird. Generally, the square socket is enough, and high-power appliances such as air conditioners, water heaters, and other high-power appliances need to be connected to 4 square wires separately. Embedded wires in new homes are generally yes.

    Each house is different, if necessary, you can ask the developer or open the wiring box yourself to measure.

    If yes, it's useless to take 4 squares. Unless you come from the bus. If the room is reserved, if it can meet the needs, don't have more wiring.

    Generally, the socket, lighting, and air conditioner in the distribution box are closed single-way, or the kitchen is single-way separated, and the oak guess is ready for future maintenance or independent shutdown does not affect the lighting of other rooms or the use of car pins. What you are talking about should be a single line in a tube, and it is rare to walk a line in a tube. The location of the sockets in the kitchen is customized according to the pattern and function of the cabinets.

    Hope it helps.

  14. Anonymous users2024-01-30

    As long as the wiring is correct, it is okay to add an outlet in cases where the capacity of the wires and switches is greater than the capacity of the actual electrical appliances.

    I think you should pay attention to:

    Whether the installation quality is passable. Including labor and materials, as well as the location of installation, waterproof, not easy for children to touch, etc.

    You said that after the change, there was a trip. It can be caused by overload.

    For example, before adding sockets, due to the limitation of the number of sockets, the electrical appliances that can be used at the same time are very restricted, and the total power is within a reasonable range, so the electricity consumption is normal.

    When the sockets are added, the sockets are increased accordingly, and the number of electrical appliances that can be used at the same time is also increased. At this time, if more electrical appliances are used at the same time, the total power exceeds the capacity of the switch, which will lead to tripping.

  15. Anonymous users2024-01-29

    At least seven: range hood, gas water heater, kitchen kitchen, electric wok, rice cooker, juicer, oven, microwave oven, etc.

    Due to the large power of the electric wok, it is recommended that the electric wok socket has one road and the other sockets have one way.

Related questions
5 answers2024-06-29

The environment of the kitchen and bathroom is relatively humid, it is recommended to choose tiles with good slip resistance, moisture resistance, wear resistance and dirt resistance, such as: >>>More

21 answers2024-06-29

It is necessary to realize the effective connection between the ground wire and the equipotential terminal box to prevent the non-standard practice of equipotential and lead to excessive resistance.

10 answers2024-06-29

Introduction: The bathroom is a place where people often wash, which will inevitably lead to some water in various places. Therefore, when using electronic products in the bathroom, it is necessary to arrange the socket reasonably, so as to ensure safety. >>>More

18 answers2024-06-29

The reason for the tripping is that the socket may be short-circuited due to water, the second is that the electrical appliance is short-circuited due to moisture, and the third is that the live wire of the electrical appliance is short-circuited with the ground wire. Judging the method, unplug all electrical appliances in the bathroom, make sure that there is no water entering the socket, and then close the air and try to open it.

6 answers2024-06-29

Waterproof wall paint: performance is more important.

To decorate a bathroom, the walls are usually covered with tiles. However, the same bathroom wall material can no longer meet the individual needs, and the emergence of waterproof coatings and waterproof wallpaper provides a new opportunity for the "makeover" of the bathroom space. The formula of waterproof wall paint adds special waterproof and breathable molecules, which can form a dense paint film, so that water molecules cannot penetrate it, ensuring the breathing function of the wall, so it can be used on the wall of the bathroom. >>>More