The computer often freezes with a blue screen, but if you turn it on and turn it off once, it s fine

Try! 4。Check if other games are installed, uninstalled, incompatible!

5。Try: 360 system first aid kit to kill stubborn Trojans! "File Recovery Area" to delete files completely!

System Repair, Select All, Fix Now! [Critical step].

Network Repair, Start Repair, Restart PC! 【Key Step】DLL File Recovery, Add Lost DLL File Recovery!

6。Optimizer, clean registry junk! Reload!

7。Game version, incompatible with computer memory, conflicts, try to change the game version!

1.Repair the low level of the hard disk. Then check it again with the documents. See if it's all fixed.

2.If it still doesn't work, the hard disk partition will be divided into areas with bad sectors. Then install the system. Check whether there are frequent crashes during operation.

3.If it still exists, you have to open the case and check it thoroughly. First of all, check if the CPU fan is not working properly.

Memory. Whether the graphics card connector is not in good contact. If the sound card network card is not onboard, also check.

Identify suspicious points one by one and deal with them. RAM is not enough. Hard drive damage.

Too much CPU dust (affecting heat dissipation)!

Hope Simple can help you! It is recommended to clean up the dust first.

It should be a memory and performance problem, which may be caused by data out-of-sync or missing errors. It is recommended to use a single 2GB or 4GB single

It's that the temperature is too high, you let him cool down and then turn it on, preferably with an exhaust fan.

It also tampers with desktop icons, and adds a lot of favorites to the browser that can't be deleted. The desktop's browser home page is locked...The account of the online game is stolen, and even the password of the online banking account can be stolen.

2.System files are corrupted if important running files of the operating system are lost or corrupted, 3When using the beta version of the software or pirated software, the computer crashes due to some bugs or unstable programs in the application software, resulting in incompatibility with the system.

4.Caused by hardware problems, poor heat dissipation, excessive dust in the computer, overclocking CPU settings, bad sectors in the hardware, loose memory modules, etc.

5. The remaining space of the hard disk is too small or there are too many fragments.

These are several cases.

2. Then click [Quick Scan].

2. Then click [Start Now].

2.Disk errors will be automatically detected and repaired during the startup process, so you should wait patiently and perform disk defragmentation after the detection and repair is completed and booted to the desktop.

See if there's a problem with heat dissipation? Detect the hard disk under it.

Memory module wipe ah memory module problem.

Judging from **, there is a problem with your computer's hard drive, and f can't get through it. Find a way to get a U disk PE system installation disk, and then enter the PE

system, run the disk detection repair command, detect and repair f disk: chkdskf: f, and then restart the computer, which should generally solve the problem. Of course, if it still doesn't work, it is recommended that you send it for professional repair or replacement hard drive.

Remove the dust from the computer, add CPU silicone grease, check if the CPU fan is good, reinstall the graphics card driver, if it doesn't work, redo the system, reinstall the driver, or not, it may be that the graphics card is broken, change the graphics card, it is recommended to go to the place where the computer is repaired and let them help you get it, it may not be a graphics card problem, it is other hardware, such as memory modules, CPUs, motherboards, power supplies, etc.

This is used in the self-test of your F disk, into the PE.

chkdskf:/f

After that, it should be enough to restart.

1. Memory module quality problems or memory slot quality problems, causing the system to constantly restart with a blue screen, open the chassis after power failure, do a single memory module test or replace a new memory module test, until the blue screen problem disappears.

2. Due to the excessive dust accumulation in the chassis, the motherboard is short-circuited due to the damp environment, open the chassis after power failure, and use a brush and leather drum to clean the dust in the chassis to return to normal.

3. For software reasons, such as being infected with Trojans and viruses, you can **360 Security Guard + 360 Antivirus Combination, press F8 when you boot up, select "Safe Mode" to boot to the desktop, and then manually start 360 Security Guard to clean up Trojans and viruses.

There are 2 possibilities

1 is a hard disk problem

2 is a system problem! The possibility of the system is relatively large, you reinstall the system and see!

It is recommended that you unplug the graphics card and memory and plug them back in. It's possible that you don't have good contact with these things. Then there's the fact that you're making the system yourself. The problem can be solved.

1 Ensure the correct BIOS settings. The settings in the BIOS must be appropriate, the wrong BIOS settings will cause you to freeze when running Windows.

2 Always check the contact status of computer accessories. Running in the case of poor board contact will cause the system to crash, so when replacing computer accessories, be sure to make the board fully contact with the motherboard.

3 Clean the chassis regularly. Too much dust will cause poor contact between the boards and cards, causing the system to crash during operation, so the chassis should be cleaned at all times and not let too much dust accumulate in the chassis.

4. Insist on carefully checking and killing viruses. Do not use CD-ROMs or floppy disks from unknown sources, and check attachments in emails with anti-virus software before opening them.

5 Shut down in the correct order of operation. Do not turn off the power before the application software finishes running normally, otherwise it will cause system file damage or loss, and cause a crash during startup or operation.

6 Avoid multitasking at the same time. Do not run other software during defragmentation or checking your hard drive with anti-virus software, as this will cause a crash.

7 Don't be overly innovative. The drivers of various hardware do not have to be updated at any time, because the drivers that have just been developed often have bugs in them, which will cause damage to the system and cause the system to crash, and the latest is not necessarily the best.

8 When uninstalling the software, use the built-in anti-installer or the installation and uninstallation method in Windows, do not delete the program folder directly, because some files may be shared by other programs, once these shared files are deleted, the application software will be unusable and crash.

9 When setting up a hardware device, it is best to check for Interrupt Reservation (IRQ) and do not let other devices use the interrupt number, so as not to cause interrupt conflicts and cause system crashes.

10 When surfing the Internet, do not open too many browser windows, otherwise it will cause insufficient system resources and cause the system to crash.

11 If your machine memory is not very large, do not run a program that takes up a lot of memory, such as Photoshop, otherwise it will easily crash when running.

12 For system files or important files, it is best to use hidden attributes so that these files are not deleted due to wrong operation and cause system panic.

13 When modifying the master boot record of the hard disk, it is best to save the original record first to prevent the original boot record from being unable to be restored due to the failure of the modification.

14 CPU, graphics card and other accessories generally do not overclock, if you really need to overclock, pay attention to the temperature of the board after overclocking, CPU, graphics card, etc. work at abnormal frequency and temperature for a long time, it will automatically restart or crash, and burn the CPU, graphics card, and motherboard.

It may be the influence of a program that makes your computer incapable of opening the program. Reboot into safe mode to kill the virus, or uninstall some unused software, or simply redo the system, it only takes 20 minutes to redo the system, and even the vulnerabilities are solved. If you have a lot of anti-virus stuff, it may take you a lot of hours, and it may not be toxic.

I would also like to know what the exact reason is.

The Trojan virus has to be reinstalled in the system.

Causes of the computer blue screen:

1. Insufficient virtual memory causes system multi-tasking errors.

2. CPU overclocking causes arithmetic errors.

3. Calculation errors caused by incompatibility or damage of memory modules.

4. The optical drive is opened abnormally when reading the disk.

5. Attacked by unknown programs or viruses.

6. Version conflicts.

7. There is an error or corruption in the registry.

8. Software and hardware are incompatible.

9. There is a bug in the application

Computer Blue Screen Solution:

Update security software, update drivers, and detect and kill Trojan viruses.

If the above methods are invalid, then the hardware is broken, and it is recommended to send it for after-sales repair.

Friends, hello, this is a software conflict or uneven hot and cold memory, resulting in a boot blue screen caused by poor contact, after restarting, the software conflict elimination memory has been warmed up and the contact is sufficient, so it will boot normally, I hope it will help you, I wish you happiness!