-
Reasons: 1. There are debris at the outlet water temperature control valve under the drinking bucket.
2. The faucet is blocked.
3. Heat in the machine.
The direct connection of the tank to the faucet is not smooth.
4. The hot water nozzle will be extremely slow to discharge water due to long-term overheating.
5. If the hot water nozzle is broken, the hot water nozzle and the cold water nozzle can be interchanged.
6. The hose at the entrance of the hot bile or other places is seriously fouled and blocked.
Repair method: 1. In general, remove the back cover and look carefully when you find that the color of the hose changes significantly, cut the nylon cable tie, pull out the hose to dredge it, and add a bottle of vinegar to boil after the water in the hot tank is cleaned.
2. Water pipe leakage or blockage Water pipe is the only channel for transporting water, if the water pipe is blocked or leaking, it has a direct impact on the water output of the water purifier. Solution: Cut off the leaking or blocked water pipe, if the blockage or leakage is too large, only replace a new water pipe.
-
1. If the indicator light of the water dispenser is not lit and not heated, the reasons for the possible failure are:
1. The power supply is not connected;
2. The fuse tube is burned out;
3. The circuit board is burned out.
Solution: 1. Check whether the heating switch is placed in the "on" position. power supply and whether there is electricity at the outlet;
2. Replace the fuse;
3. Replace the circuit board.
2. If the indicator light of the water dispenser is on but not heated, the reasons for the possible failure:
1. The heating tube is burned out;
2. The thermostat is broken.
Treatment method: 1. Replace the heating tube;
2. Replace the thermostat.
-
1.Not plugged in. If the water dispenser is not connected to the power supply, it will naturally not produce hot water.
2.If the water dispenser has normal indicators but no hot water, it may be that the fuse pipe is damaged.
3.If the power is turned on normally and the fuse is normal, it is possible that the internal heating pipe is broken and the water dispenser cannot produce hot water.
-
In the case of a power outage of the water dispenser, it may neither heat nor refrigerate, it depends on whether the water dispenser is powered on, whether it is plugged in, and if it is plugged in, see if the plug is loose. It is also necessary to check whether the ** level fuse is okay, the sound mark and indicator light are still not heated when they are on, the position of the core tube is behind the water dispenser, it is an insulated plastic head, a protruding part that can be twisted, if it is loose, there will be no hot water.
-
Reasons for not coming out of the water:
1. Pipe gambling plug.
2. The switch is damaged. Pass all the relevant pipes to see if they are all blowing out with less effort. It is important to note whether the filter fitting is a plug or not.
3. The hot water pipe is blocked, and the pipe is blocked by air after heating, resulting in hot water not coming out.
4. The machine itself is faulty.
Workaround:
1. Disassemble the back cover and observe the height difference between the bottom height of the water storage tank and the cold water faucet (because it should be more than 5cm).
2. Check whether there is any foreign matter blocking at the outlet (or inside) of the cold water pipe under it.
3. Unscrew the back cover with a screwdriver. There are two outlets, one hot and one cold. You can drain it from the back, so that the water inside can be drained out, and when it is drained clean, you can press the water outlet in front to see if the water can come out.
4. Cut off the water pipe or the blocked part. If the blockage is too large, a new water pipe will need to be replaced.
-
That's because the heater is malfunctioning.
-
Reason one, the water dispenser is not energized, in the case of the water dispenser is neither heated nor refrigerated, the first thing to consider is whether the water dispenser is energized, whether it is plugged in if it is plugged in, see if the plug is loose, if it is still not energized, use an electric pen to check whether the socket has electricity. If the socket is a little bit, the plug is plugged in or there is no power, it means that the internal wiring of the water dispenser is not well connected, and you need to ask a professional master to come to repair. The water dispenser does not produce hot water, reason two, the water dispenser indicator light is on, but it is still not heated, first check whether the water dispenser's fuse pipe is intact, the position of the fuse pipe is in the rear of the water dispenser, it is an insulated plastic head, you can twist the protruding parts (loosen in the opposite direction), you can buy a few fuses and place them at home, change, in addition, the long-term use of the water dispenser may have a broken and empty wire, you can change a wire to try.
Finally, if the above reasons are ruled out, then the water dispenser is corroded and oxidized due to long-term moisture, resulting in disconnection, which needs to be repaired and replaced by professionals.
-
Hello, there are also water dispensers that do not have hot water function! It's just keeping warm!
-
Summary. There are many reasons why the water dispenser can't release hot water, and the wrong operation in the process of our usual use can cause the water dispenser to not release hot water, and the specific reasons why the water dispenser can't release hot water are: 1. The heating capacitor of the water dispenser is damaged, resulting in the water dispenser being unable to heat water.
2. The hot water sink of the water dispenser is blocked, so that the water cannot enter it for heating. 3. The circuit of the water dispenser is in poor contact, and the heating function cannot be used normally. This is the reason why the water dispenser can't release hot water, and the water dispenser should be repaired in time if there is a problem, otherwise the problem may become serious.
There are many reasons why the water dispenser can't release hot water, and the wrong operation in the process of our usual use can cause the water dispenser to not release hot water, and the specific reasons why the water dispenser can't release hot water are: 1. The heating capacitor of the water dispenser is damaged, resulting in the water dispenser being unable to heat water. 2. The hot water sink of the water dispenser is blocked, so that the water cannot enter it for heating.
3. The circuit of the water dispenser is in poor contact, and the heating function cannot be used normally. This is the reason why the drinking sun water machine can not keep an eye on the hot water, and the drinking water Hengkai and the machine should be repaired in time, otherwise the problem may become serious.
-
1. If the water outlet of the water dispenser is caused by the blockage of the faucet, then it is necessary to find a professional maintenance worker to deal with it, and find that the internal water pipe is knotted, and replace the new water pipe in time.
2. The hot water outlet of the water dispenser can not produce water, most of it is caused by a failure, and it is necessary to conduct a careful investigation to determine the reason for the lack of water, and then solve it in a targeted manner.
3. The hot water outlet does not come out of the water, the first reason that comes to mind should be the blockage of the faucet, at this time there is no tool to clean up, you can find a maintenance worker to deal with it; If you open the back cover of the water dispenser and find that the internal water pipe is knotted, then you need to replace the water pipe with a new one, and the hot water outlet will continue to come out after completion.
4. Another common reason is that the water outlet is blocked, which is due to the fact that the water dispenser is not cleaned in time during long-term use, and a lot of scale will adhere to it, causing water difficulties, so it is usually necessary to clean up the water outlet or other places with water stains in time every once in a while.
-
There is no electricity, the hot water switch is not turned on, so that the water dispenser can not release hot water.
It should be that the faucet at the hot outlet is broken, and the faucet is often aging when putting hot water. You can go to the water dispenser store and buy a different one of the same model. >>>More
Double-check if it's a water dispenser leaking or a water dispenser faucet leaking. The processing methods are as follows: >>>More
Disassembly:
Unplug the power first, turn on the two switches of the water dispenser, and drain the remaining water in the bucket. >>>More
If you buy something, you must want to choose the best one, now some of the quality of the water dispenser is not up to par with the opportunity to flood the market, a few days ago, the General Administration of Quality Supervision, Inspection and Quarantine announced the sampling pass rate of water dispenser products only, nearly forty percent of the water dispenser has potential safety hazards. It is recommended that you still choose a good brand, we buy Trijie, in the top ten brands of the top ten brands introduced on the online introduction of Midea, Angel Angel, Qinyuan, Langmu, Pentium Povos These are very big brands, you can go to the top to understand the introduction.
There are many styles of water dispensers on the market, and this should be decided according to your needs. Recently, my daughter-in-law just bought a water dispenser from Beiding, the design is really fantastic, small and exquisite, and it will not take up a large area. On the desk and coffee table, it can be placed, which is much better than the traditional one. >>>More