How to deal with dripping water at the hot water outlet of the water dispenser?

Double-check if it's a water dispenser leaking or a water dispenser faucet leaking. The processing methods are as follows:

1. Water dispenser leakage.

1. Cause of failure: The float valve of the water purifier is not installed correctly, and when the water dispenser is full, the float valve fails to stop the water from flowing down the bucket of the water purifier and causes water leakage.

Exclusion method: Reinstall the float valve, test whether it works properly, and then place it on the water dispenser;

2. Cause of failure: The silicone tube in the water dispenser is loose.

Exclusion method: Open the back plate, directly observe or add water to observe which interface leaks, find out, and use the new or original cable to fit the silicone tube on the interface. After repair, dry the parts inside the water dispenser with a dry cloth.

Second, the water dispenser faucet seepage.

Cause of failure: whether the buckle position of the faucet is tightened or whether the buckle position of the faucet is twisted teeth.

Exclusion method: clockwise.

Tighten the red or blue part of the faucet to reset the faucet tightening. Or unscrew it counterclockwise, adjust the silicone tube and spring in the faucet by hand, and then re-screw the faucet; You can also ask after-sales service personnel to come to replace the buckle of the faucet or open the back panel to replace the whole faucet.

This is generally the hot water valve seal failure, can only be replaced, can be purchased from a treasure according to the same model, if the hands-on ability is strong, you can replace it yourself, remove the water dispenser back cover plate to remove the hot water hose, unscrew the fixed plastic screw hot water valve to take it down, note that the hot water pipe and the water valve are generally bound with cable ties!

Maybe it's too hot, just change the mat.

If there is bottled water on the water dispenser, it is estimated that it is caused by the leakage of the bucket, and the leakage point is between the mouth of the bucket and the cap of the bottle. All bottled water is refilled. During the filling process, the lid is opened, and the barrel mouth will be worn to a certain extent. It is recommended to change a bucket of water that does not leak.

It may be because the seal of the water valve inside is damaged, resulting in water leakage, the water valve cannot be removed from the front, you can open the back cover to remove the water valve, and it cannot be repaired in the case of a handful, so you can buy a new product and replace it back;

For the leakage of the smart seat, if the water bottle is broken and the overflow is caused by the rupture of the water bottle, the intact water bottle can be replaced, and if the float fails when the water bucket is used and cannot be effectively sealed, the float needs to be replaced;

Water leakage of internal components of the body, such as silicone pipe rupture hot tank, cold tank weld leakage, electronic ice tank leakage, solenoid valve leakage (pipeline machine), internal overflow caused by water bottle rupture and so on, can be replaced by replacing damaged parts; Use a good and qualified water bottle to solve the problem.

You're talking about dripping water at the water inlet, right?

If yes, it's because the water valve seal inside is damaged, causing a water leak.

According to the ** you gave, the water valve cannot be removed from the front. You can open the back cover to remove the water valve, and if you can't repair it, you can buy a new one and replace it back.

It may be because the seal of the water valve inside is damaged, resulting in water leakage, the water valve cannot be removed from the front, you can open the back cover to remove the water valve, and it cannot be repaired in the case of a handful, so you can buy a new product and replace it back;

For the leakage of the smart seat, if it is the overflow caused by the rupture of the water bottle, the intact water bottle can be replaced, if Nian Kai is using the water bucket when the float fails and cannot be effectively sealed, the float needs to be replaced;

Water leakage of internal components of the body, such as silicone pipe rupture hot tank, cold tank weld leakage, electronic ice tank leakage, solenoid valve bump leakage (pipeline machine), internal overflow caused by water bottle rupture can be replaced by more noisy parts; Use a good and qualified water bottle to solve the problem.

In the case of making sure that the parts are not damaged, there may be an obligation in the outlet pipe to open the back cover of the water dispenser to see if there is an obligation in the water inlet pipeline.

First, you can look at the seals or materials around the drain. If the seal is worn or aged, it may cause water to flow out of the discharge return. You can try replacing the seal or having it reinstalled or repaired.

Secondly, there may be some dirt or garbage in the tank, which may block the drain and cause water to drip out. You can do regular tank cleaning to make sure you clean the inside of the tank from dirt and debris. This will help avoid water dripping and keep your water pure and free of impurities.

Also, you can check the water pipes of your water dispenser. Sometimes the water pipes may be damaged or deteriorated, which may cause water to flow out of the drain. If a water pipe is found to be leaking, it is recommended to replace it with a new one.

Finally, if the above methods still don't solve the water drop problem, if you have experience, you can try turning on the water dispenser and checking its inside. Find the cause of the water dripping and then fix the problem. However, if you don't have the experience or skills to repair it, it is recommended that you have a professional handle it.

If you handle it on your own, it can be dangerous and lead to more complex problems.

In short, ensuring that your water dispenser has a good environment and daily maintenance can ensure the hygiene and safety of drinking water and the long service life of the water dispenser. No matter what causes the water dispenser drain to always drip water, we need to deal with it in time to avoid causing more troublesome problems.