How many meters should the gas hose in front of the gas appliance not be exceeded?

Updated on home 2024-06-11
21 answers
  1. Anonymous users2024-02-11

    Hello, the gas pipe in front of the gas stove should not be more than one meter five long, otherwise it will be dangerous, generally about one meter, thank you.

  2. Anonymous users2024-02-10

    There is no length limit on the gas hose in front of the gas appliance, because whether it is a gas tank or natural gas, between the gas tank and the stove, between the gas meter and the stove, it is a low-pressure gas, that is, the gas pressure in this pipeline is very small, as long as it is a special gas pipeline, as long as it does not leak how long it is. This kind of pipe is required to be used for more than one year for fire protection, and it must be replaced with a new pipe if there is no air leakage.

  3. Anonymous users2024-02-09

    I just checked for you, according to the national regulations, it cannot exceed about five meters.

  4. Anonymous users2024-02-08

    As long as it depends on the specific situation, under normal circumstances, the approximate distance should be between 40 cm and 60 cm, and there is no such problem at all.

  5. Anonymous users2024-02-07

    The money for gas appliances is generally not more than five meters too long, which is easy to cause the danger of gas leakage, and the general household is 1 to 2 meters.

  6. Anonymous users2024-02-06

    Dear, if you use it in general, it is best not to exceed two meters, the best words are more reliable within one meter and one meter five, and it is easy to have hidden dangers if you exceed two meters, so it is best not to exceed two meters.

  7. Anonymous users2024-02-05

    The gas hose in front of the gas appliance should not exceed how many meters, and this must be within three meters, so it can be personal, and it is not good to be too close.

  8. Anonymous users2024-02-04

    It should not exceed six, and it will not be easy to use if it is too long.

  9. Anonymous users2024-02-03

    How many meters should the hose of blue utensils and Qiannan utensils not exceed 100? The general length of the hose of the blue appliance Qiannan apparatus is about one-meter-five.

  10. Anonymous users2024-02-02

    As long as it depends on the specific situation, it should generally be at least 40 cm or more, so that a very good effect can be achieved.

  11. Anonymous users2024-02-01

    There is no specific length specified, only that gas pipes must be used.

  12. Anonymous users2024-01-31

    Korean dramas should not be more than the day before yesterday, this should not be too long, otherwise, this should be some more of his flow, so it should still be counted in those attention.

  13. Anonymous users2024-01-30

    According to the plot, the gas hose should not exceed how many meters, and it should not exceed 10 meters.

  14. Anonymous users2024-01-29

    No more than two meters, so it is safer, be sure to choose a better quality, pay attention to the use time.

  15. Anonymous users2024-01-28

    Pay attention to the problem of aging, pay attention to the time of use, replace it on time, and pay attention to whether there is any air leakage to avoid danger.

  16. Anonymous users2024-01-27

    Under normal circumstances, 2 meters of gas hose is enough to use, more than 2 meters may cause the hose to bend or bend, resulting in insufficient gas supply, do not use gas hose close to the stove surface, gas hose should not be pressed.

  17. Anonymous users2024-01-26

    Summary. 2.In addition, the rubber gas pipe commonly used is required to be replaced every two years at most.

    Because the life of the rubber gas pipe is very short, only 18 months, at most two years of use, serious overdue use will only return unforeseen safety hazards, so it should be checked regularly, found aging, cracking, scorching, rat bites and other conditions to replace in time, so as not to cause greater irreparable gas.

    Hello, according to the national standard, the gas hose shall not exceed 2 meters. There are several reasons for this:

    1.If the gas hose is too long, it will increase the resistance of the inlet pipe, such as the resistance of the chaotic channel, resulting in a decrease in the transmission pressure and reducing the heat flow rate of the stove. If it is too short, it will cause the phenomenon of pulling and dragging, and the hose will easily fall off.

    2.In addition, the rubber gas pipe commonly used is required from its service life, and it must be replaced after two years at most. Because the life of the rubber gas pipe is very short, the grinding is only 18 months, and it will be used for two years at most, and the serious overdue use will only bring unforeseen safety hazards, so it should be checked regularly and replaced in time if aging, cracking, scorching, rat bites, etc., so as not to cause greater irreparable gas.

    Thank you.

  18. Anonymous users2024-01-25

    The length of the gas hose is generally not more than 2 meters. The pipe is originally a weak link, many accidents occur on the pipe, theoretically the leakage of the pipe per unit length may be the same, then the longer the pipe, the higher the risk factor. In reality, the longer the tube, the higher the likelihood of being pinched (leaked).

    For example, being bent, stretched, pedaled, cracked, and aging are all potential hazards.

    According to the relevant gas safety management regulations and technical specifications, the hose should be replaced every two years. Due to the different quality of various brands of hoses, it is recommended that the hoses be replaced once a year for the user's own safety, and the user should consciously do this.

    The following points should be paid attention to when replacing the hose: When the hose is connected, a special valve fitting should be used, and then it should be tightened with a throat code. The hose length should be less than 2 meters.

    The hose must not be bent. Stretch. Phenomena such as the pedal of the mind.

    Cracked, aged hoses should not be used.

  19. Anonymous users2024-01-24

    The length of the special extinguishing hose for household Shimin gas does not exceed () meters, and the service life does not exceed () years.

    Correct answer) Correct answer).

  20. Anonymous users2024-01-23

    <> "The length of gas pipelines generally does not exceed how many meters:

    It should not exceed 2 meters, and there should be no joint in the middle, and there should be no three-permeable passage, otherwise it will not only affect the gas consumption, but also easily deform and break the crease of the hose after a long time, resulting in gas leakage. In addition, if the gas pipe is far away from the stove, you can call the gas company to request pipeline transformation, and the beam will shorten the distance between the two as soon as possible to avoid the gas pipeline being too long and causing potential safety hazards.

    How often do gas lines need to be replaced:

    Normally, the gas pipe needs to be replaced once a year or so, if it is not replaced after the year, it is easy to cause problems such as aging, cracks, and falling off, resulting in gas leakage, so it should be replaced regularly and maintenance should be done.

    Precautions for Gas Pipeline Replacement:

    1. Before replacing, you should use a tool to measure the distance between the pipe and the stove, or buy according to the size of the old gas pipe, but try to buy big brand products when buying, so that the quality is more guaranteed.

    2. When replacing, use the air valve connector, and then tighten it with the throat code.

    3. When replacing, the length of the pipe should be controlled, not more than 2 meters, and it should not be bent or passed through the wall.

    4. When replacing the pipeline, the pipeline should not be installed in a place with a flame or a relatively large radiation, nor should it be close to the stove.

    5. If it is a desktop stove, the pipe should not be wound underneath or crossed. In the case of built-in cooktops, the pipes should not be close to the bottom of the cooker and should be kept at least 10 cm away.

    6. After replacing the hose, you need to put soapy water at the pipe connection, and then turn on the gas switch to see if there are bubbles.

  21. Anonymous users2024-01-22

    Regarding hoses, it should be clear that there are several meanings:

    1. The shorter the better, not the best. In fact, many cities have completely eliminated hoses, and the cookers sold to these cities have all been changed to standard 4-tap joints and connected with aluminum-plastic pipes. There are several theories about the maximum length of a hose, that is, the longest is meters, 2 meters, and 3 meters.

    In fact, the shorter the compliance, the better.

    2. Regarding the service life of the hose, the mainstream view is 18 months, but there is also a saying that it is 36 months. In general, it should be short rather than long.

Related questions
3 answers2024-06-11

The brands of gas stoves I know are Boss, Siemens, and Fotile

9 answers2024-06-11

The method of opening the gas self-closing valve is to open the plug valve by hand, and the direction of the handle needs to be parallel to the direction of the pipeline. Gently pull the lift up and pull it to the position of the first switch. >>>More

13 answers2024-06-11

Be sure to choose a gas stove with stainless steel panels, and at the same time know the thickness of stainless steel, and the thicker the better. The burner must be made of pure copper, and only this material is the best. The higher the heat flow rate on the manual, the better, generally in between. >>>More

7 answers2024-06-11

The domestic gas burner is still in the research and exploration stage, mainly because of safety and quality issues, because gas is different from other fuel burners, once the gas leaks and the danger of pulverized coal or oil burners is completely different, but the domestic development speed is quite fast, the "Eleventh Five-Year Plan" has risen a group of small and medium-sized enterprises with technical strength, and its burner has become one of the few burner brands that can sell well abroad, and the manufacturer has a certain role in publicity. But the main reason is that the design of advanced gas and air premix, semi-premix and turbulent blending reflux combustion technology, thereby improving the combustion efficiency, increasing the combustion intensity and flame stability, and it happens that foreign (such as Riello, Italy and other countries) gas burners although the effect is the same, but due to the low cost value of China, so in foreign countries in a low price state, regardless of whether there is a problem with such a sales model, but it is also a high-tech and low-cost international market. The staged ignition combustion technology in the return zone is used to strengthen the combustion of low calorific value gas. Its optimized burner structure and random design with different brazier brick flame shapes, can make the flame shape form cylindrical, straight and flat, attached to the wall shape, to ensure the uniformity of the temperature field in the furnace, and the flame shape and flame length can be designed according to user requirements. >>>More

14 answers2024-06-11

The valve generally rotates clockwise to be off. The handle of the ball valve and plug valve only needs to be rotated 90 degrees. If the handle is parallel to the pipeline, the valve should be machined with a groove, when the groove is parallel to the pipeline, it means that the valve is open, and vice versa.