Is the quality of artificial cement mixer good or good quality of cement tanker

Motor power: dry mix mortar mixer with a volume of 5000L (ordinary mortar): General mixer feeds 3 tons at a time, spindle power 55kw, 6 flying knives with a total of 45kw, a mixing time of 4 minutes, 720,000 kWh of electricity is required for 300 working days a year, and the mortar output is 324,000 tons; The double-running high-efficiency mixer feeds 2 tons at a time, the spindle power is 45kw, 12 flying knives are 11kw, the mixing time is 2 minutes, 403,200 kWh of electricity is required for 300 working days a year, and the mortar output is 432,000 tons.

If you want to buy it, find a manufacturer with a little color. There are simple, semi-automated, and automated production lines for dry mortar equipment. The simple one is a mixer and a scale**3000-50000 yuan; Semi-automatic line ** at 30,000-100,000 yuan;

Dry mortar equipment, putty powder mixer, dry mortar mixer, dry mortar mixer, dust removal equipment...

Manual mixing of cement, mainly depends on the accuracy and time of the formula, which should be the same as commercial concrete. It is to look at the sense of responsibility of the workers.

The concrete of the cement tanker belongs to commercial concrete, and its formula is accurate, and each batch of samples requires the quality supervision station to test.

The state currently requires the use of commercial concrete, and many places do not allow themselves to mix. The main control is quality. But ** is about 100 yuan more expensive than mixing it yourself.

Concrete mixer truck**: 3-8 square mixer truck 10-200,000 yuan, 8-15 square mixer truck 30-400,000 yuan, 16-22 square mixer truck 40-500,000 yuan.

Cement mixer truck (concrete mixer) is a special truck used to transport concrete for construction; Due to its appearance, it is also often referred to as a snail car. These trucks are equipped with cylindrical mixing drums to carry the mixed concrete.

The mixing drum is always kept rotating during transportation to ensure that the concrete carried does not solidify. After the concrete is transported, the inside of the mixing drum is usually washed with water to prevent the hardened concrete from taking up space.

Composition:

It is composed of automobile chassis, mixing drum, transmission system, water supply device, full-power power take-off, front and rear brackets of mixing drum, reducer, hydraulic transmission system, feeding and discharging system, control mechanism and other parts. Due to technical bottlenecks, the four major pieces of domestic mixer truck tank volume of 3m -8m are used, and most of the four major pieces of domestic mixer truck with a volume of more than 8m are imported components.

The mixer truck is composed of: second-class chassis, transmission system, hydraulic system, frame, mixing tank, feeding and discharging device, water supply system, control system, human ladder and other parts. The front end of the mixing tank is connected with the reducer and is installed on the front of the frame, and the rear end is supported by two supporting rollers installed in the back of the frame through the raceway.

According to the market ** in August 2020, the price of concrete mixer truck is 10-200,000 yuan for 3-8 square mixer trucks, 30-400,000 yuan for 8-15 square mixer trucks, and 40-500,000 yuan for 16-22 square mixer trucks.

Concrete mixer trucks are used to transport construction concrete, and these trucks are equipped with cylindrical mixing drums to carry the mixed concrete.

During the transportation process, the mixing drum will always be kept rotating to ensure that the concrete carried will not solidify, and after the concrete is transported, the inside of the mixing drum will usually be washed with water to prevent the hardened concrete from taking up space.

The first quality of a cement mixer truck mainly depends on the demand, and there are two main aspects that affect the quality of a cement mixer truck. On the one hand, whether a cement mixer truck has formal procedures, that is, whether it can go to the household normally, and the first with procedures is naturally higher; On the other hand, the chassis and tonnage used in a cement mixer truck, the size of the chassis affects the size of the bodywork. Therefore, it mainly depends on the demand.

Depending on what brand of concrete mixer truck you need, it varies from 10-200,000 yuan for 3-8 square mixer trucks, 30-400,000 yuan for 8-15 square mixer trucks, and 40-500,000 yuan for 16-22 square mixer trucks.

About 250,000 for 8 parties.

About 340,000 for 10 squares.

12 14 square of about 440,000.

Sany Zoomlion's **, bulk purchase is much cheaper.

The amount of different parties is different, about 12 180,000 for 3-7 squares, about 26 390,000 for 8-15 squares, and about 44,470,000 for 16-18 squares.

Depends on where you bought the chassis. What specifications of tops, different brands and different specifications have different prices.

The difference between a cement mixer truck is not only the difference in the size of the mixing tank, but also the following differences:

1。The chassis of the mixer truck is the part with the highest cost and the highest maintenance cost in the composition of the mixer truck. For the chassis, the engine power and torque, fuel consumption, tires, frame, driving comfort and emission standards of the chassis are mainly examined.

2. Hydraulic transmission parts. Due to the poor working environment of the mixer truck, the quality requirements for hydraulic transmission parts are relatively high. There are two configurations of hydraulic transmission systems currently on the market:

One is the split configuration, which is composed of a hydraulic oil pump, a hydraulic motor, a cooler and a reducer, that is, the three major parts of hydraulic, which is mature and reliable, and easy to maintain; The other is three sets of one configuration, by the hydraulic oil pump, three sets of a reducer (including hydraulic motor, radiator, reducer), the configuration of high integration, easy installation, beautiful appearance, but because the hydraulic system oil and reducer oil is the same oil, so the requirements for oil are stricter.

Now it has become the norm to check the inspection limit all over the country, so 8 parties and more than 8 parties are mainly lightweight.

5-7 square vehicle ** is about 16-200,000.

8 square vehicle ** in about 25 square.

10. Lightweight vehicle ** about 340,000.

12-14 square lightweight** is about 440,000.

Wei (壹玖捌一三�捌三壹玖捌武) can inquire about the car.

The ** of the cement mixer truck is also different according to the different quantities.

How about this one? 8 squares - 12 squares - 16 squares?

Customized all kinds of mixer trucks according to demand, good homogeneity, high feeding and discharging speed, clean discharge, reliable hydraulic transmission system, light operation, beautiful appearance, it also has the advantages of stable rotation, reliable performance, easy operation, long working life, etc., whether it is used for concrete mixing, or agitation and transportation, it can ensure the quality of concrete.

There are Dongfeng, Foton, Valin, Sinotruk, Shaanxi Automobile, a variety of chassis for selection.

The role of the mixer truck is to transport the concrete from the pumping station to the construction site, and the mixing drum will always be kept rotating during the transportation process to ensure that the concrete carried will not solidify. After transporting concrete, the inside of the mixing drum is usually washed with water to prevent the residual concrete from hardening and taking up space, so that the volume of the mixing drum is getting smaller and smaller.

According to the moisture content of the concrete transported by the concrete mixer truck, there are three kinds of mixer trucks: wet material type, dry material type and semi-dry material type. Most of the wet material concrete mixer trucks are used in China, which can transport the concrete produced by the mixing plant (station) or the aggregate (sand, gravel), cement and water mixed according to the ratio, and in the process of transportation, the wet material is constantly slowly stirred to prevent the initial setting and segregation of concrete in the transportation process. However, the time from production to pouring of concrete generally cannot be exceeded, so as to avoid concrete solidification. So, in the longer distance transported.

In this case, dry and semi-dry material mixer trucks are used to transport them. The dry material mixer truck can directly load the dry aggregate and cement into the mixing drum of the truck according to the proportion, and the dry material in the drum is mixed during the transportation process.

The vehicle will arrive at the construction site or add water to the construction site to complete the mixing of concrete. The aggregate and cement in the concrete transported by the semi-dry material mixer truck are also prepared according to the proportion, and contain a certain amount of water, but the water content does not meet the pouring requirements, and it is necessary to add water and stir at the construction site when the vehicle is about to reach the construction site or at the construction site.

1.Cement mixer truck is a transportation equipment for transporting concrete over short distances; At the same time, the quality of the concrete needs to be ensured within the transport distance.

A mixer is a device that mixes building materials such as cement and sand.

One is a means of transport, the other is production equipment. The purchase must be based on the actual demand.

2.If you find the goods, this line is profitable.

This investment is still relatively profitable, of course, it depends on your connections. Now real estate is so hot, houses are being built everywhere, hehe, some make money.

For those who can really make money, the cement mixer truck is a special vehicle for mixing concrete, and the mixer truck is convenient and flexible to send the mixed concrete directly to the site, but the mixer can only be fixed on the construction site.

How Does a Cement Mixer Truck Work? After reading it, stay away from it on the road.

With the process of building a moderately prosperous society in an all-round way in the country, the construction of cities and the construction of new countryside are moving forward, and more and more concrete and cement must be transported from cement mixing plants to construction sites and highways. Cement mixer truck plays an important role.

The cement mixer cannot be moved, and it is directly put on the construction site for use. The cement mixer truck is a special vehicle integrating mixing and transportation, so it is recommended that the cement mixer truck is better and more practical. **In terms of the initial investment of the mixer truck, the report is also high, and the income is considerable.

Cement mixer truck is a transportation equipment for transporting concrete over short distances, and mixer is a equipment for mixing cement, sand and other building materials.

The mixer is mainly used in the on-site mixing of the construction industry, and the concrete mixed by the mixing equipment is transported to the place where the concrete is used by the mixer truck.

Generally, mixer trucks are applied to mixing plants. Now large and medium-sized cities generally promote commercial concrete, which can save costs and reduce dust pollution.

If you have a connection with the mixing plant, you can buy a mixer truck to contract concrete transportation; If you have a connection with the construction party and your city allows self-mixing concrete, you can buy a mixer for rent. Whether you can make money or not depends on the stability of the business and the safety of operations. The profit is usually more than 35%, and the business can generally recover the cost within two years.

It is mainly divided into two parts: chassis part: body part.

The commonly used chassis of concrete mixer truck are: Sinotruk, Dongfeng, Foton, Jiefang.

Now let's explain the advantages and disadvantages of each site one by one.

Sinotruk: Sinotruk chassis is cheap, but the parts department is easy to buy, and the accessories are more expensive, not suitable for long-term use, only suitable for short-term use.

Foton: From the perspective of the chassis configuration of the special car, the comparison of Foton's car in the country, the configuration is still higher, because the car entered the market late, it is not easy to be accepted by customers.

Liberation: The car is relatively well recognized in the northern market, and occupies a small market share in other markets, because the origin of liberation is in the north, all of which are more accepted by northerners, while the south has an east wind, and it is difficult for liberation to enter the southern market.

Dongfeng: **moderate, accessories are everywhere, service stations are also blooming everywhere, but the configuration is the old configuration, (Dongfeng Tianlong chassis configuration is high, driving comfort is strong, but **high).

Finally, it is to look at the topwork part of the pull, because each place is different to make special vehicles, and the quality is also different, and users still need to grasp it by themselves. For example, the gearbox is different.

The last important thing is to look at the 4 major accessories reducer, reducer, hydraulic motor, radiator.

Under the premise of quality assurance, CIMC tops mixer truck is highly affordable, cost-effective, with a full set of imported hydraulic system systems and high-strength steel tank material. As the largest special-purpose vehicle production group in China, it has 18 special-purpose vehicle modification factories such as CIMC Huajun and CIMC Lingyu, and contracted service stations and self-built service stations all over the country. You can search Zhumadian CIMC Huajun Vehicle **** Marketing Service Department for consultation.

Feeding speed: m3 min as specified in the national standard.

The feeding speed of CIMC Huajun mixer truck is greater than m3 min.

Discharging speed: m3 min specified in the national standard.

The discharging speed of CIMC Huajun mixer truck is greater than m3 min.

chassis part and body part; The three major pieces of the tops part are how about the quality.

It is mainly divided into two parts: chassis part: body part.

Chassis part: need to look at the engine reducer and other large parts, tops part: mainly the selection of hydraulic system.

There are three main types of concrete mixer selection, namely, according to the requirements of engineering quantity and construction period, according to the type of concrete designed, and according to the composition, characteristics and consistency of concrete.

1. Select according to the requirements of the project quantity and construction period.

When the concrete engineering quantity is large and the construction period is long, it is advisable to choose a medium-sized or large-scale stationary concrete mixer or mixing plant. If the amount of concrete engineering is small and the construction period is short, it is advisable to choose a small and medium-sized mobile mixer.

2. Choose according to the type of concrete designed.

When mixing concrete is plastic or semi-plastic, it is advisable to choose a self-falling mixer. If the mixed concrete is high-strength, dry and hard or light concrete, it is advisable to choose a compulsory mixer.

3. Select according to the composition characteristics and consistency of concrete.

If the consistency of the mixed concrete is small and the aggregate particle size is large, it is advisable to choose a self-falling mixer with a large capacity. For example, when mixing concrete with large consistency and large aggregate particle size, it is advisable to choose a self-falling mixer with a fast speed of the mixing drum. If the consistency is large and the aggregate particle size is small, it is advisable to choose a compulsory mixer or a mixer with medium and small capacity conical reversal discharge.