Overview of Vertical Mortar Mixer, Mortar Mixer Models

Hello, look at the model. A mixer is a machine with blades that rotates in a cylinder or trough to mix a variety of raw materials into a mixture or a suitable consistency. There are many kinds of mixers, including compulsory mixers, single-shaft mixers, twin-shaft mixers, etc.

Precautions: Mixers and automatic feeders must be cleaned inside, especially in winter, so as to prolong their life. The mixer is a mixer, because the usual function of the mixer is to mix and mix all kinds of dry mortar, so it is commonly known as a mixer.

Chinese name: mixer divided into: compulsory mixer, single shaft mixer Features:

Vertical mortar mixer is designed to cooperate with the promotion and implementation of the Ministry of Construction of the People's Republic of China (JGJ70-90) construction mortar basic performance test method standards, and the design of special equipment, mainly used in the construction industry, colleges and universities, scientific research units, quality inspection departments for wall powder materials and brick wall mortar strength test mixing machinery. It is also suitable for the production of artificial marble factory fabrics and other powdered mixing work. It has two relative rotations of the stirring blade moving clockwise and the stirring drum moving counterclockwise, so it has the characteristics of uniform stirring, short stirring time, high efficiency and convenient operation.

Drum mixer model: JZC350, JZC500, JZM750.

Compulsory single-shaft mixer: JDC350, JDC500.

Load the material into the barrel and close the barrel lid, which can be set on the controller according to the required time. The mixer automatically stops at the time it reaches the set level. When discharging, the machine is stopped first, and then the machine is started to remove the material in the direction of the spindle.

Clean the barrel in time.

Precautions for the use of the blender.

The drum concrete mixer should be set in a flat position, and the front and rear axles should be padded with square wood, so that the tires can be raised and overhead, so as to avoid walking when starting.

The drum concrete mixer should implement two levels of leakage protection, and after the power supply is turned on before going to work, it must be carefully inspected, and it can be used only after the empty car test transfer is qualified. In general, the empty speed is slightly faster than the heavy car (after loading) 2-3 turns, if the difference is more, the ratio of the moving wheel and the transmission wheel should be adjusted.

The above content refers to Encyclopedia - Blender.

There are three kinds of concrete mixers: compulsory mixer, self-falling mixer, vertical shaft mixer.

The compulsory mixer is through the rotation of the two horizontal mixing shafts inside the mixing silo, and drives the mixing arm and mixing blades on the mixing shaft to forcibly mix various materials entering the mixing silo.

The self-falling mixer is through the rotation of the mixing silo, so that the materials inside it continue to fall freely, so as to mix and mix.

The mixing system structure of the vertical shaft planetary mixer is upright, and the mixing arm and mixing blades are distributed in all directions at a reasonable angle. When working, as the spindle rotates, the individual stirring blades make planetary motion. When running, when the spindle rotates, the blades are driven to force the material to be squeezed and turned over for compound actions.

There is no dead angle in the mixing process, which is suitable for stirring materials with small particle size and high requirements for uniformity.

Concrete mixer is a machine that mixes cement, sand and gravel aggregate and water into concrete mixture. It is mainly composed of mixing drum, feeding and discharging mechanism, water supply system, prime mover, transmission mechanism, frame and supporting device.

The principle is the same, but the working conditions and conditions of the mortar mixer design are much worse than those of the concrete mixer, so the mortar mixer can be used to mix the mortar, but the mortar mixer should not be used to mix concrete.

Now there is a kind of machine that can mix concrete and mortar.

Kiss! Hello, happy to answer your <>

The method of mixing cement mortar by pro-machine is as follows: the feeding sequence of concrete mechanical mixing is to add stones, cement and sand to the mixer in turn, dry mix evenly, and then add water slowly, all the feeding time does not exceed 2min, and after all the water is added, continue to mix for 2min. Before that, it is necessary to pre-mix once, that is, to rinse the chamber first, so as not to affect the mix ratio of the mixture when the formal mixing is formed, and then open the tung burn to start the mixer and feed. The quality requirements of mortar mixing are implemented in accordance with the provisions of the Ministry of Construction JGJ70-2009 "Test Methods for the Basic Performance of Building Mortar".

1) When the mortar is mixed on site, the mass measurement of each component material should be adopted. (2) The mortar shall be mechanically stirred, and the mixing time shall be calculated from the completion of feeding, which shall be: 1) cement mortar and cement mixed mortar, which shall not be less than 2min; 2) Cement fly ash mortar and mortar mixed with admixtures shall not be less than 3min; 3) Mortar mixed with organic plasticizer should be 3 5min.

3) The mortar should be mixed with the void, and the cement mortar and cement mixed mortar should be used within 3h and 4h respectively; When the maximum temperature exceeds 30 during construction, it should be used within 2h and 3h respectively after mixing. Hope mine can help you <>

Do you have any other questions?

According to the actual situation of the mortar manufacturer, the equipment has an annual output of 100,000 tons, 200,000 tons, 300,000 tons, 500,000 tons, etc., which can be customized according to customer requirements.

The production line has a high degree of automation, from sand and gravel crushing, screening, drying to automatic measurement, mixing, bagging, and bulk loading of raw materials, the whole process is controlled by computer, man-machine interface, and the operation is intuitive and convenient. When choosing a device model, in addition to **, more should pay attention to the quality of the equipment, everyone should remember that cheap can not buy good things.

Ready mix mortar equipment.