Can a concrete mixer mix feed?

It is recommended to choose Rodiger (Beijing) Machinery and Equipment, which is mainly engaged in the sales and after-sales service of Rodiger related products in China. It mainly produces mixing and reaction equipment for mixing, granulation, emulsification, coating, drying and all industrial mixing and related engineering technologies.

It can be mixed directly, the principle is the same, there are many concrete mixer companies directly sell the machine to the feed mill to mix the feed.

Modification configuration: The tank body is made of special volume plate of Wuhan Iron and Steel, which can be 15 18 cubic meters according to user requirements, and can be divided into multiple bins for loading and unloading a variety of different feeds, and can be selected according to the actual situation of the user: electric auger type (three-phase electric supporting place) or hydraulic auger type (no three-phase electric place). Hydraulic bulk feed truck realizes fully automatic operation, no need for manual feeding and discharging.

The operation is simple and convenient. Imported domestic hydraulic parts, easy to maintain. Electric auger bulk feed transport truck is the latest research and development for different customer groups, to meet the low-end market of new products, the car is not equipped with a vehicle generator, electric auger using mains three-phase 380V to power supply, the wheel base is small to adapt to rural roads.

The car is cost-effective and is favored by customers, and is suitable for small farms and feed mills with narrow road conditions. The mechanical spiral unloading method is adopted, the unloading speed is fast, and the continuous operation can be carried out, which greatly improves the production efficiency.

OK!!! But wash it clean.

How to use the multi-purpose mixer:

1. Squeezing function: wash the fruits and vegetables to be squeezed, peel them, remove the core, cut them into small pieces, and cut them into the size of the feed port. Then you need to buckle the safety buckle of the machine, plug in the power supply, press the power button, start the machine, and slowly put the pre-cut vegetables or fruits into the trough, and at the same time, you need to use the push rod to slowly push the inside of the machine, so that there will be vegetable juice or fruit juice flowing out.

2. How to use the mixer as a fruit pulp machine: connect the host and the cup holder, and then tighten the jam cup and the knife holder, and then open the lid of the cup, put the vegetables or fruits that need to be stirred into the cup, and then cut the vegetables or fruits into pieces after washing them in advance, then add an appropriate amount of cold boiled water, and then cover the cup lid. Finally, you need to put the knife holder and the cup on the base, here you should pay attention to be sure to put the machine flat and tighten it, and then fasten the safety buckle, and then turn on the power supply, so that it can be stirred into jam.

If you want to make soy milk, you need to install a filter screen, and then put the soaked soybeans into the cup from the feed port of the cup lid, then add a certain amount of water, cover the lid, turn on the power, and it can operate normally, and the filter can filter out the residue of soybean milk, making the taste of soy milk excellent.

3. How to use the multi-functional mixer as a meat grinder: first of all, you need to add a sealing ring to the knife holder, and then you need to wash the meat that you grind, remove the bones, peel and tendons, and cut it into slices and put it in the cup. The amount of each time you put it in needs to be put in according to the regulations of different products, and then add a small amount of oil or water, after putting it down, turn on the power, but it can work normally, of course, when grinding meat, you can add some seasonings according to the needs of taste, and here I also remind you that the grinding time should not be too long, otherwise it will affect the taste of the meat.

Hello dear, what is the reason why the feed mixer can't rotate 1. The mixer barrel is filled with materials that exceed the specifications (overload), resulting in the motor being unable to drive the mixing blades, so it cannot work; 2. When the weather is cold, the machine needs to be preheated before starting, otherwise the material will be crushed and stirred too early, the power will be insufficient, and it is easy to get stuck. In addition, the power of the machine is large, and the electricity consumption is also large, if the power supply of the line is insufficient, the line will heat up and the resistance will increase, which will also lead to the jam machine; 3. Whether the wiring is correct. If the wiring is wrong or mismatched, it will also fail to start, and even burn out the motor; 4. The center of mass of each micro-segment of the rolling rotor in the rotation system cannot be strictly on the rotation axis, therefore, when the rotor rotates, there will be lateral interference, and it will cause strong vibration of the system at some speeds, and the speed when this situation occurs is the critical speed.

In order to ensure the normal operation of the system or avoid damage to the system due to vibration, the working speed of the rotor of the rotating system should avoid the critical speed as much as possible, and if it cannot be avoided, special anti-vibration measures should be taken; 5. The problem of vertical feed mixer is whether the bearing is damaged. If the bearing is damaged and squeaks, it must be replaced. Therefore, our equipment is filled with butter every 40 hours of operation, using high-temperature butter.

As for how to replace the bearing, whenever the maintenance is carried out, once it is found, it will be replaced by Nakesen. Hope it helps. If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress.

Finally, I wish you good health and a good mood!

Nowadays, many places are developing the breeding industry, such as breeding cattle, sheep, aquatic product breeding, etc., large-scale breeding is generally applied to feed mixers, which can reduce manpower, so how should feed mixers be used?

Q: How should the feed mixer be used? What are the common failures that occur during application?

Satisfactory: 1. Before the application of the feed mixer, it is necessary to rotate the motor rotor vigorously to repair whether the fitness movement of the tooth claw, hammer type and motor rotor is flexible and firm, whether there is a collision in the shell, and whether the conversion direction of the motor rotor is consistent with the direction of the equipment arrow symbol.

2. The "clamping screw" of the production scheduling pressure wheel is between the pressure wheel and the template. Take 15kg of granular material during debugging, it is best to use cool bran, or 5 kg of peanut kernel meat plus 15kg of wheat husk, hydrostatic test, repeated rolling and squeezing for 15 minutes, in and out of the press, the feed vise in the mold hole clamps the nail communication, and then squeezes until everything is fed normally.

3. In the case of the use of the feed mixer, the worker should bypass the tangent direction of the hammer rotation, and it is not allowed to wear gloves to feed, and the hand can not cross the anti-counterfeiting line, and block the use of copper and sticks instead of hand feeding.

4. Pay attention to the activities of the feed mixer in time, and the feeding must be symmetrical to avoid blocking the stuffy car, and there is no need to work at high load for a long time. If it is found that there are vibrations, noise, the temperature of the rolling bearing and the fuselage is too high, and some phenomena such as outward spraying, the machine should be shut down and repaired immediately, and the shortcomings can be solved before it can work again.

5. In order to better produce safely, when the cover is taken out, the power supply must be cut off first, and the power switch of the equipment must be turned off before touching the template of the pressure wheel with other items. In addition, after the machine and equipment are used, check the tightening of each component, if you see a mark that has fallen off, you should immediately tighten it, and check whether the tightness of the transmission belt is suitable.

6. When the feed mixer is applied, there will sometimes be abnormal noises, and the proper way to deal with them is to let the machinery and equipment rotate at a high speed, listen carefully to the noise generated by the first one, and adjust the live screws in the storage tank if it is an abnormal sound in the middle of the tanker. The second is to check whether the piece is thrown and planted, and calibrate the motor rotor.

In addition, in the application of feed mixer, sometimes there will be no feeding, or the high efficiency of feeding and crushing is getting slower and slower, at this moment you can also do several types of inspections, one is to check whether the dough bag on the air outlet is deposited too much wheat flour, resulting in a long time does not disperse the wind, the second is to check whether the dragon ** leaf in the tanker is too damaged too serious, the third is to check whether the conveyor belt is loose, or due to a long time of loose hair, the fourth is to check whether the rated power of the motor is all normal, Whether the speed ratio is slightly lower due to the broken motor, the fifth is to check whether the hammer type on the rotor of the crusher motor is more seriously damaged.

Before using the feed mixer, it is necessary to rotate the rotor by hand to repair whether the claws, hammers and rotor movements are active and reliable, whether there is any bump in the shell, and whether the change direction of the rotor is consistent with the direction pointed by the arrow of the machine.

Usually, you should put some uncut feed directly into this mixer, and then pull on the switch and plug it in. The method of use is very simple.

You can put some of the feed prepared in advance into this mixer, and then you can make a feed with a better taste, and the mixing is also very uniform.

It is to prepare some of the ingredients you need, then put them in the blender, and turn on the machine to mix.

First, the first is to connect the electricity. It is necessary to ensure that the ground wire of the planetary mixer is connected normally to avoid accidents.

2. When jogging and debugging, from top to bottom, the planetary frame of the planetary mixer rotates clockwise, if it rotates in the opposite direction, then it is wrong to connect to the power supply, and it should be reconnected to the power supply.

3. When the planetary mixer barrel is loaded and pushed into the machine base, the barrel must be fixed first, and the equipment can be operated only after the planetary carrier and the barrel are sealed, so as to prevent the rotation of the planetary carrier from injuring the operator.

4. If the material needs to be vacuum degassed, first check whether the planetary mixer water tank is filled with water, and then turn on the vacuum pump to check the sealing performance of the vacuum pipeline to prevent air leakage in some places. When shutting off the vacuum, the ball valve in front of the vacuum pump is first closed. When raising the planetary cover, the vent should be opened first, and the pressure should be relieved before it can be raised.

5. When using the hydraulic station of the planetary mixer, pay attention to the pressure indication and should not open it too much. When the pressure pointer shakes, it indicates that the pressure has been overloaded and the pressure needs to be relieved.

6. After using the planetary mixer, when cleaning the barrel, all power must be cut off before cleaning, so as to prevent electric shock.

7. When producing materials, it is strictly forbidden to put your hands into the barrel to prevent danger.

8. If there is any abnormal noise in the process of operating the planetary mixer, it must be stopped immediately for inspection, and the operation can be started again after troubleshooting.

Concrete mixer operation steps and precautions:

Steps:

1. Turn the function switch on the column to the "automatic" position, press the start switch on the controller, and the whole running program will automatically control the operation by itself.

2. The whole process will automatically stop after the operation is completed, and if you need to stop in the middle of the operation project, you can press the stop button and then restart.

3. After pressing the start button, the display will start to display the time, slow, sanding, fast, stop, fast, and the running indicator lights will flash on time.

4. When automatic control, all the switches of the manual function must be dialed to the stopping position.

Operational matters:

1. The gap between the blade and the pot wall should be 3mm 2mm with a measuring gauge, and if the gap is out of tolerance, the upper and lower positions of the blade can be adjusted to achieve the specified range.

2. After each use, the stirring blades and pots should be cleaned in time, and the electrical parts should avoid violent vibration, keep away from water and high temperature, and pay attention to dust.

I don't know if you know anything about Henan Zhixin Machinery? You can pay a visit and you will get more professional answers. Only by knowing the use of the mixer can we better improve the efficiency of the project.

If the machine is relatively new, there are buttons, probably up, down, automatic water addition, manual water addition, stirring, discharging, stopping, vibration.

1. Check whether the controller is good before starting the concrete mixer;

2. The concrete mixer must be cleaned after use, especially in winter, there must be no foreign matter in the drum before use, which can prolong the service life;

3. The concrete mixer should be placed in a solid place, stabilized with a bracket or leg, and cannot be supported by tires;

4. When the concrete mixer is running, it is strictly forbidden to put the tool into the drum, and it is necessary to pay more attention to safety;

5. When the concrete mixer is raised in the feed hopper, for safety, it is strictly forbidden for personnel to pass or stay under the hopper, and the mixer hopper is fixed after the work is completed;

6. When the concrete mixer is overhauled on site, the mixer hopper should be fixed, the power supply should be cut off, and the outside should be used when entering the mixer drum.

Guardianship.

The problems, causes and elimination methods that are prone to occur in the vertical feed mixer are shown in the following table:

The vertical feed mixer adds the materials to be mixed from the lower feed inlet, and the mixing materials are entered from the feed hopper of the vertical mixer into the vertical screw conveyor by the lifting spiral in the feed mixer, and after lifting up to the top, it is then thrown in an umbrella shape, falling from the surrounding of the mixing barrel, re-entering the vertical screw conveyor from the gap at the bottom of the sleeve, and lifting it up again, so that the cycle stirs and mixes until the mixing is uniform, and the discharge port is opened to discharge the material.

It is worth noting that although the feed mixer can improve the production efficiency, there are also some dangers, and farmers must pay attention to the operation specifications when using the feed mixer. Before using the feed mixer, in addition to the need to inspect the whole machine, the belt should also be adjusted. After the machine is turned on, the machine is tested with about 15 kg of powder to observe whether the machine can be discharged normally.

After officially starting to use the feed mixer, you must be careful not to forcibly feed the material with your hands, wooden sticks, etc., to prevent your hands from getting involved in the machine.