Home decoration, the position of the toilet has been moved by 50cm, what way to buy a toilet to flus

Decoration is a particularly annoying thing, in this process there are many people who will be annoyed and sloppy decision, there must not be a time to relax, because sometimes make a wrong choice, you will regret it in the future, because troublesome things will continue to appear. For example, whether to install a toilet or a squatting pit in the bathroom, I looked at many people's homes, and they all installed toilets because they felt that the squatting pit was not high-grade enough. Is squatting really that bad?

Let's take a look.

Many people choose to squat in their homes, so what are its advantages?

1. Practical and cheap.

Squatting pits are practical, inexpensive. The most important thing is that the occupancy is less, the squatting pit is more suitable for the kind where the bathroom is smaller and the house planning is not very good, otherwise it is very inconvenient to install the toilet in this kind of house.

2. It is more conducive to defecation.

There is a scientific basis that the squatting posture of a person is more helpful to go to the toilet and can make the human body more comfortable and smooth, while the toilet is the opposite, which may cause constipation.

3. More hygienic to use.

When we use the squatting pit, we do not have direct contact with others, so the squatting pit greatly reduces the chance of infection with germs, and the use is hygienic.

There are many advantages of squatting pits, but many people think that it is not high-grade, and they will not install it, especially in the homes of rich people, no one has been to install squatting pits.

If you have the conditions, the horse smart toilet.

If the toilet position changes at 5-10cm, it is common to use a toilet shifter if you need to adjust the toilet position due to the unsuitable pit distance.

It is recommended not to use the shifter under extraordinary circumstances, although the product description can be moved by 5-10cm, but once it is moved more than 5cm, it will affect the flushing effect and easily block the toilet. If you want to move a longer distance, you can't use a shifter.

If the position of the toilet changes at about 10cm, beyond the range of the special toilet shifter, the floor can be raised, and the horizontal pipe is discharged in the elevated part, and the distance between the toilet and the pit distance is solved through the horizontal displacement of the horizontal pipe, and a water trap is also added to prevent the odor from backflowing.

Do not move more than 10 cm back and forth, do not exceed 5 cm left and right, this distance can keep the mouth of the sewer is still in the groove under the toilet, and the interface of the outlet can also be connected with it, without affecting the function of the toilet, if this limit is exceeded, there may be a leakage, or the mouth of the sewer is pressed under the edge of the toilet, which directly leads to unusability.

As long as you move, no matter how small the distance is, it will affect the flush.

Why? Once the house is built, the location of the toilet drain is decided. The spout of the toilet must be connected to the outlet of the sewer pipe, so the location of the toilet is determined.

If the toilet is moved by 1cm, the interface will be staggered by 1cm, and the water channel will be narrowed by 1cm, but the water can still pass through, and the molded stool will not pass. Then the toilet paper plugged the hole again, and the whole toilet was blocked.

If it must be moved, it is recommended not to exceed 5mm.

As long as you move more than 1 cm, you have to install a shifter, and the flushing effect is not so good, because the general toilet pit distance is based on the structural design of the house, are standard!

It's about 5cm, but it's best not to move, because after moving, I'm afraid that the water will be affected.

It is recommended that if you can not move, it is best not to move, if you must move, if you have a sewer pipe in the bathroom, then you can buy a wall toilet, so that there will be absolutely no toilet clogging problem if you move, and it is also very beautiful.

You can find a toilet seller to ask for a drain shifter, preferably 15cmBut the water is not so good, so it is better not to move the toilet.

Because of the different sitting, it is different, and if the technology is in place, it can generally only be about 5 cm.

As long as you don't deviate from the ground reservation.

There must be space, in other words, it is necessary to raise the ground, and if there is a caisson, it is not used

Hello, both flush and siphon are available. 1. Pay attention to the straight flush sewage pipe is straight, the water pipe is very thick, the gravitational acceleration of the water is used, it is simple and rough and effective, and it is easy to flush down larger dirt, so there is no paper basket in the bathroom. Water saving is also good.

However, the disadvantage is that the flushing sound is loud, and it is easy to affect the family when going to the toilet at night, and because the water surface is small, it is easy to scale, and the anti-odor function is not as good as the siphon toilet. 2. The siphon type pays attention to the sewage pipe, the structure is "S" type, which is improved from the "straight flush type", and a certain water level difference will be generated after the sewage pipe is filled with water, forming a suction force to discharge the poop. As the name suggests, "siphon" sewage mainly relies on suction, rather than the simple and rough impact of the water, so the sound is relatively small, and then the water cover can be made larger and will not splash out.

Aside from other factors, whether the toilet itself is easy to block is related to the flushing pressure, you should choose a water tank with a relatively large storage capacity and a relatively high water level.

Under normal circumstances, within 10cm;

It is possible to change the position of the toilet, but do not change it until it is absolutely necessary. The reason is that the toilet involves sewer pipes and waterproofing, and it will also involve downstairs, so if it is not changed well, the impact will be greater.

There are 3 situations in which the position of the toilet can be changed:

1. Due to the inappropriate distance of the toilet pit, the position of the toilet needs to be adjusted, and the toilet shifter can be used to solve the problem. But the disadvantage is that it is easy to block the toilet. So don't use it if you can.

2. If it is a sunken bathroom, then how to change it.

3. Discuss with the residents downstairs to change the location of the sewer pipe, generally to make a big elbow at the top of the downstairs, so that it will not be as easy to block as the toilet shifter. However, after changing the position of the sewer pipe, it is necessary to re-do the waterproofing and do a closed water test to ensure that there will be no water leakage. It is also generally suitable for small distance changes.

Shifting is moving. However, if it is moved too far from the original sewer, the ground must be raised because there is no slope to drain the sewage.

Hello, if you use a shifter, you can move 15 centimeters around the original hole 360 degrees, it is recommended that you do not move, really want to move to discuss with the downstairs, re-make a hole, re-arrange the pipe, but waterproof must be passed, otherwise the water leakage will be troublesome, do not make a hole if you move too far easy to block, the drainage pipe is generally a slope of one meter and three centimeters according to the specification. If it is not easy to make a hole, another way is to raise the platform, and ensure the slope of the drainage pipe by raising the ground, so as to ensure the smooth drainage. If you don't understand, you can add a question.

Be careful when using the shifter.

Of course, the location of the toilet should be determined according to the location of the sewer, as long as you take care of the sewer, you can move as far as you want.

Moving the toilet (toilet) during the renovation may encounter the following situations:

1.Affect the backwater when the floor tile is paved;

2.If the waterproof treatment is unqualified, it will cause leakage and affect the residents downstairs, 3The diversion of the sewer has affected the speed of drainage and has caused blockage.

If you don't have to think about any of the above issues, you can do whatever you want.

If the sewer pipe does not move, the axis can be displaced by 3 cm.

The toilet drain mouth cannot be changed unless it is absolutely necessary, and if it has to be changed, it should be paid attention to:

1. The interface adopts a 90-degree elbow of 110 (try to do it downward), the horizontal pipe of 110 should have some slope as much as possible, and a small short pipe of about 30mm should be connected to the 90-degree elbow at the new position;

2. Use the standard (domestic brand toilet, with a protruding mouth at the drain port, and insert this mouth into the 30mm small short pipe during installation) toilet, do not use double drain eyes, and pay attention to the use of the toilet.

meters, the displacement distance is relatively large, with 75 and 90 pipes, the risk of blockage is too great.

2.If the 110 pipe is moved, the ground elevation should be about 20 cm if the drop and slope are required.

3.The better way is to cut the riser, connect the tee, and then the horizontal pipe comes over, install the concealed water tank and the wall-hung toilet, the wall-hung toilet sewage outlet is 23 cm away from the finished surface, the drop is enough, and there is no problem with the sewer. And you don't have to raise the ground. The disadvantage is that the cost is relatively large.

The renovation of old houses, another name is the renovation of old houses. It generally refers to the renovation and decoration of the decoration style, water and electricity results, kitchen and bathroom department and other redesigns of the house due to the relatively long living time or the decoration does not meet the current living needs.

The principle is that the toilet drain mouth of 110 cannot be changed unless absolutely necessary.

If you have to change it, you should pay attention

The interface adopts a 90-degree elbow of 110 (try to do it downward), the horizontal pipe of 110 is as steep as possible, and a small short pipe of about 30mm should be connected to the 90-degree elbow of the new position.

Use a standard (domestic brand toilet, with a protruding mouth at the drain outlet, and insert this mouth into a 30mm small short pipe during installation) toilet, do not use double drain eyes.

Pay attention to the use of the toilet bowl.

Rerouting with a 75 pipe just needs to be raised by 150mm

Do you move out, or do you lean against a wall?

Two ways! 1 Ground elevation.

2 is to choose a toilet with a large drop.

3 Go straight to the building materials market to see if there is a suitable toilet or ask the owner directly!

The toilet needs to be moved in the home improvement bathroom, which can be avoided and best avoided to avoid the toilet blockage in the future; If it is really necessary to change, it is recommended that the bottom pipeline should not be remodeled at a right angle, but must be diagonal, which can minimize the probability of pipe blockage.

At the same time, when using it in the later stage, you must pay attention not to throw diapers, rags and other dd in the toilet!

It's best to dig up the heavy security, and if you do a raise, maybe the bathroom is higher than the outside.