Help The toilet tank at home is broken

The only bathroom teaches you to do the following analysis and deal with it:

The inlet pontoon is separated by the tank wall or other parts.

Adjust the position of the inlet float appropriately.

The filter element is clogged with debris.

Remove the filter, clean it, and install it again.

The inlet pontoon is low.

Adjust the pontoon to the appropriate height.

There are debris stuck between the water inlet float and the small water tank, and it cannot move up and down.

Clean up the clutter and adjust the appropriate position.

The low inlet water piece is stuck with debris.

Remove the check valve to clean up the debris and install it again.

The only bathroom hopes these will help you! It is recommended that you go to the official website of the only bathroom to learn more about this knowledge! With the rapid development of e-commerce, in 2010, the only bathroom began to combine online and offline sales model, and established China's first new marketing model based on offline serve and online B2C.

As the pioneer of the new marketing model of China's sanitary ware industry, the only sanitary ware has led the wind of change in the industry and has become the preferred brand of China's new generation of sanitary ware.

Needless to say, there was a water leak. You have to distinguish whether it is a mat leak or a leak from a high overflow, if it is a mat leak, just run to the decoration city to buy a mat and replace it, it is easy to get it. If the overflow hole is leaking, then your float is broken, just buy one and replace it.

As long as the toilet is sold, it is very simple to repair, you only need your fingers to get it, if the screws are too tight, borrow a wrench to get it.

The float (float) of the toilet tank is broken--- and the water cannot be sealed--- replaced.

The float card in the tank is owned or broken, go buy a new one, or your water bill will be constant**.

The drain switch is broken. Or adjust the float height.

If it is not a one-piece toilet, it can generally be replaced, but whether you can find a suitable accessory is a problem, and it is recommended that users change the toilet again.

Toilet fittings are the core part of the toilet, commonly known as the heart of the toilet, mainly composed of inlet valves, drain valves and buttons, roughly can be divided into two categories: conjoined and split, conjoined accessories are used for conjoined toilets. Split fittings are used for split toilets.

Secondly, the user needs to measure the distance from the lower drain valve button to the top of the water tank (note that the drain valve is measured).

If the cistern of the old-fashioned toilet is broken, we need to deal with it promptly. Because if it is not dealt with in time, it will cause us a lot of trouble and inconvenience. If you don't know how to deal with it, you can take a look at the following steps:

1.Check what the problem is.

First of all, we need to check which part of the tank is having problems. It could be that there is a problem with the valve that connects the water pipe, or there may be a malfunction in the tank that prevents the water from being stored or discharged. Once we've identified the problem, we're better positioned to solve it.

2.Replace the valve.

If the problem is with the valve, we can try to replace the valve simply instead of replacing the entire tank. Of course, this requires basic DIY tools and experience, but this method is usually more cost-effective and practical than replacing the entire tank.

3.Replace the water tank.

If there is another fault in the toilet tank, such as a crack or leak, it is usually necessary to replace the entire tank with a new one. After buying a new tank, we need to close the inlet and drain valves, and remove the old tank with the necessary tools such as wrenches and screwdrivers, and install the new tank on the old toilet.

4.Contact a professional.

If you're not a professional at identifying faults or you lack DIY experience, you may want to consider contacting a professional to repair or replace an old toilet tank. In addition to solving the problem, this also ensures that the device will not be damaged during repair and that the same problem will not occur in the future.

In conclusion, to deal with the problem of an old-fashioned toilet tank, we need to carefully examine what the problem is, choose the right way to solve it, and ensure that the equipment is not damaged during repairs. Hopefully, the above methods will help solve the problem while also increasing your knowledge and skills.

If the flush tank of the toilet is broken, you may wish to deal with it from the following aspects:

1.Observe the fault phenomenon.

First of all, you need to observe what the phenomenon of the fault is, such as poor flushing or failure to flush. According to the specific fault phenomenon, determine how to deal with it in the future.

2.Find the cause of the failure.

According to the fault phenomenon, the cause of the fault can be found to be caused by the failure of the flush valve, or it may be caused by the blockage of scale. If the valve fails, you can consider replacing the flush valve; If it is a limescale blockage, it can be removed with an appropriate amount of acetic acid.

3.Cleaning and maintenance.

In normal use, the flush tank of the toilet bowl should be cleaned and maintained regularly to prevent the adhesion of scale, stains and other substances. If there is a problem with limescale or stains, you can use a special toilet bowl cleaner to clean it.

4.Seek professional help.

If the above methods cannot solve the problem, or if you do not have the relevant experience to deal with it, you can consider seeking professional help. Please contact a professional plumbing repair company or toilet repair professional for overhaul and repair.

In short, if there is a problem with the flush tank of the toilet, you must be too worried, as long as the method is appropriate, it is not complicated to deal with. However, paying attention to maintenance during use can also effectively reduce the risk of toilet failure.

Two options: one is to let the after-sales of the toilet repair it. The other is not in the after-sales period, it is recommended that you buy a new one, but be sure to understand the model and size.

Let's talk about the first plan first: when you buy a toilet, you will keep a receipt, at this time you have to see if your toilet is within the scope of maintenance, if so, you can contact the merchant for after-sales solution.

The second is that the maintenance period is over. Don't panic, we can still buy it, the most important thing is that you have to know the brand and model of your toilet.

You can first go to the toilet store you bought and ask if there is a separate toilet seat, but according to my experience, there is generally none, but we can try it, in case there is.

After that, the merchant has no result, so let's try it online, but there are too many sizes on the Internet, so we have to measure the size of our own home. The distance between the screw holes on the toilet bowl, the width and length of the toilet lid should be paid attention to, and then the measured size can be sent to the merchant.

How to remove the toilet seat here?

First of all, of course, you must clean the toilet bowl before you start to operate, otherwise it will be very uncomfortable for you to lie on the toilet all the time.

Target. Then to find the screws that fix the lid under the toilet, the owner with greater strength can directly twist it with his hand, I recommend finding a screwdriver to unscrew it, otherwise it is easy to hurt his hands. The main reason is that the location of this screw is relatively difficult to find, and it may have to lie on the floor, so it is necessary to clean the bathroom first.

If you really can't dismantle it, find a professional to repair it.

It does not affect the use of the toilet.

It is to affect the aesthetics.

It is possible to buy a toilet seat online.