If I buy a new manual transmission car, how can I drive it to save fuel?

When the manual transmission car starts, remember to step on the clutch to the end with the left foot, hang a gear, put the right foot on the accelerator in the void, slowly lift the clutch while releasing the handbrake and lightly step on the accelerator, step on the clutch with the left foot slowly lift a little and then step on the accelerator immediately, and the vehicle starts smoothly. Each time the ignition is fired, the program controls the fuel injector to inject a large amount of fuel. Frequent start-ups and stalls, fuel consumption is naturally high.

The higher the engine speed, the higher the computer can control and increase the fuel injection of the engine through sensors such as the throttle position sensor, and then increase the engine speed, and the more gasoline will be consumed. Each engine has a maximum economic speed, usually between 1500 and 2500, so it is advisable to keep it in this range as much as possible. Take German car 5 gears as an example, 1st gear is used for speeds below 20 km/h, 2nd gear is used for speeds between 20 and 40 km/h, 3rd gear is used for speeds between 40 and 60 km/h, 42nd gear is used for speeds between 60 and 80 km/h, and 5th gear is used for speeds of 80 km/h or more.

If the speed is not enough, be sure to downshift, especially to avoid the engine speed for a long time below 1800 rpm, otherwise not only fuel consumption, but also damage the engine.

Personally, I feel that when driving, don't drive above 80 at every turn, especially in ordinary cars. It is a car with an approximate price of less than 100,000 yuan. Because of this.

If the car soars above 100 speeds, it will consume a lot of fuel. And don't step on the accelerator too hard when you start the car. In that case, it will also be wasted, and a lot of oil will be wasted.

Manual transmission cars are more fuel-efficient than automatic transmission cars, new cars pay attention not to step on the accelerator to step on what car, fuel also image the new car run-in effect.

Today's cars, basically have a fuel consumption display function, it is recommended to display the instantaneous fuel consumption function, you can see the fuel consumption value at starting, idling, and high speed, so that you will have an overall understanding of the fuel consumption performance of your car, which is a good reference for your own driving habits. When parking, the gear is put into neutral, but the engine is still running, at this time, the engine is actually idling, and it is running to consume fuel. If you park for a few minutes, it's a good idea to turn off the engine and try to prevent the engine from idling, as the fuel consumption of 3 minutes of engine idling can make the car travel 1 km.

Acceleration is best done at an economical engine speed of around 2000 rpm, and throttle force of 30%-50% is optimal. The speed is too high, the amount of fuel injection is large, the speed is too low, and the engine output torque is too small. If the throttle is too strong, the thickening program will be initiated, and the amount of fuel injected will increase significantly.

The throttle force is too small, and the engine output torque is too small.

My car has a cruise at a fixed speed, and the basic starting and acceleration are all cruise at a fixed speed, which is quite fuel-efficient. Proper control of the speed or neutral gear, such as acceleration when going uphill and neutral gear when going downhill, can reduce some fuel consumption. The overall fuel-saving strategy of cruise control is to accelerate for a while and coast in neutral gear for a while (too steep downhill may lead to speed loss of control, so pay attention to safety, it is better to coast in low gear, and never neutral).

The same goes for foot pedaling. However, if the terrain of the road is not undulating, the speed control is very good.

Cars are the most fuel-guzzling when they speed up, and the smoother the ride and the fewer brakes, the more fuel-efficient. Therefore, when driving on the road, make sufficient predictions, such as predicting the distance to the vehicle in front and the distance and time of the traffic light, and try to slide without stepping on the brakes. If you step on the accelerator all the way, you can consume twice as much fuel.

It is estimated that the fuel power of the car is 2% lower than that of a light car with an extra 45 kilograms of stuff. It is recommended to develop the habit of cleaning your car, tidying up the trunk regularly, and try not to put things on the roof, as the wind resistance caused by the roof rack full of things will reduce the number of gasoline distances by 5%. After a speed of more than 75 km/h, the car will consume about twice as much fuel as it would normally drive to overcome air resistance.

The official statement should be to drive at a constant speed and reduce the number of starts and brakes.

It took more than 90,000 kilometers for my car to change the brake pads, and even the 4S repairman found it incredible. He said that he could still run 20,000 or 30,000 kilometers in the last two pieces.

Novices will not necessarily be more fuel-efficient than automatic transmission cars, so first of all, you must be familiar with the performance of the car, be able to drive skillfully and then ask the old driver for advice, and you should summarize more, and the number of kilometers will naturally go up.

A manual transmission car is the most fuel-efficient if it does not accelerate or slide away, but the right foot must be ready to brake at any time when it is not accelerating.

Cars with manual transmission should maintain a reasonable coordination of speed and gear, and do not step on the accelerator, so as to save fuel.

Don't accelerate or decelerate, choose the right gear, no matter what the car, the engine speed between 2000 and 2500 is the most economical speed. When the road conditions are good or running at high speeds, you can choose to step on the accelerator for a few seconds and release the accelerator for a few seconds. Of course it will be a little tiring.

But I think it's fun to drive.

Slow oil feeding, slow start, slow acceleration, avoid stepping on the accelerator and braking suddenly.

My car can run more than 10,000 kilometers with 300 yuan of oil.

Road Condition 1: You need to stop 100 meters ahead, and the current gear is 3rd gear.

Fuel-saving tips: Quickly move up 4th gear, then slide with gear.

When you drive a car, you must first clarify the current road conditions, what kind of road conditions determine what kind of driving style: what is the vision ahead, other motor vehicles, non-motor vehicles, pedestrians, road conditions, etc., depending on the road conditions, the driving style is also different.

Stop in the first 100 meters without obstacles, the current gear is 3rd gear, the speed is 40 km/h, is this how to run the 100 meters, or do you step on the accelerator first to increase the speed to 50 km/h, or even 60km/h, in the shortest possible time, and then move up to 4th gear?

The answer is the latter. However, it is important to note that do not refuel after moving up 4th gear, but coast in 4th gear until the end of the 100 meters. So, to some extent, not all deep throttle on the accelerator necessarily costs a lot of fuel.

Of course, the moment you step on the accelerator is fuel-efficient, but in this way, you can win the time of economic driving (coasting without stepping on the accelerator), and then the economic driving speed will win back the amount of fuel wasted due to instant refueling, and it is still fuel-efficient in the whole driving process.

Road Condition 2: When you are not close enough distance from the car in front to move up to 3rd gear.

What should you do when you can't move up to 3rd gear or speed from the car in front of you, but it seems too low to drive in 2nd gear?

At this point, you can put it in 2nd gear, then step on the throttle deeply, and then don't move up to 3rd gear, but cut into neutral and use inertia to slip. Mr. Xu, a team driver with more than 20 years of driving experience, summed up this experience. "It's fuel-efficient without having to hit the brakes too quickly after moving up third gear, and it also saves you the trouble of switching from third gear to neutral the next time you're approaching the car in front. ”

How to turn on oil in a manual vehicle. Manual pregnant women are still the most common cars, manual files mainly rely on manpower to complete the operation of changing gear, so that the driver can better experience the fun of climbing, accelerating joy and driving the car, the most important thing is that it is a manual bar that saves oil, and then we will talk about how to open the hand.

The shift movement should be fast, accurate, and placed, shorten the shift operation time to reduce the kinetic energy loss of the car, thereby saving fuel, but also from the high block, do not wait for the inertial force of the car movement to disappear too much block, which is equal to the vehicle restarting, accelerating, and thus fuel, so it is necessary to change the shift in time, without dragging.

How to turn on the car.

Don't walk away and abuse the brakes. Before driving, try to avoid traffic jams on the way, because in this case, the manual vehicle is larger than the normal drive, and the brakes should be minimized in the drive. The engine and low gear play a more economical role.

Start trick, unlike auto shock, when the manual carriage starts, the left foot remember to put the clutch on the clutch, hang a gear, put it on the right foot empty, slowly lift the union, pull the throttle loosely, slowly lift the left turn foot on the left, then slightly press the throttle, and the vehicle will save the oil.

Drive as much as possible in the right gear, each car has its own characteristics, when the high-speed engine moves at high speed, the speed is high, such as 2000 rpm, the low-speed engine speed may be lower, such as 1500 rpm, what we need to do is based on the current speed, increase the work of the engine of the most comfortable engine, of course this time the maximum oil of the engine;

Maintain the best speed, the most savvy driving state intuitively, the most economical speed is 60-80 km for small displacement vehicles and 80-100 km for medium vehicles.

There are also a lot of veteran drivers to do this. It can achieve the effect of saving, because it is good, of course, there is a bad place, just bring carbon to the engine, the heart of the car is not good.

Driving to choose the right gear according to the road conditions, starting the dynamometer to change the block, manual block for a long time, you can also master the way to save.

1. Gently press the accelerator to accelerate slowly.

City driving, intersections are a major feature, floor oil start does have a sense of pride, but the next intersection again meet the red light, followed by a foot brake is inevitable, high fuel consumption in exchange for the power is lost in vain, and wait for the lights, those vehicles that are overtaken by you have also caught up. It can be seen that driving in the city, starting fast and accelerating sharply, does not allow you to save more time, but wastes fuel and increases the probability of traffic accidents.

2. Less brakes when driving.

Whether it is the acceleration of the car when starting, or braking while driving, frequent large changes in vehicle speed will cause fuel consumption to increase. In order to save fuel, try to avoid such drastic, frequent speed changes.

When driving, do not frequently step on the brakes to reduce speed, always pay attention to the conditions on the road, and reserve the distance from the car in front. When you need to stop at a red light or other conditions, use low-frequency braking to coast slowly to avoid rapid and frequent braking. This not only saves fuel, but also ensures safe driving.

3. Shift gears appropriately and control the speed.

Car gear, vehicle speed, engine speed is interrelated, in the case of high speed, the fuel injector input more fuel into the engine, the engine output stronger power into the gearbox. Different engines have different most economical and practical speed zones, in which the best combination of fuel consumption and power can be achieved.

Fourth, the tire pressure value should be reasonable.

Tire pressure is the most easily ignored, too low tire pressure not only increases driving resistance, tires are also more likely to age, but it is not recommended to hit the tire pressure too high, will affect comfort, and there is a risk of puncture, just control the tire pressure within the range specified by the vehicle.

Fifth, maintenance should be done on time.

The maintenance of the vehicle must not be slack, oil, filter, spark plug and other consumables closely related to the engine must be replaced in time, deteriorated oil not only can not play the effect of lubrication, but also increase the resistance between the various parts of the engine, in addition to the spark plug ignition problem, is also a waste of fuel culprit.

Although there are many ways to save fuel, they are all about fully understanding your car and adopting a more suitable driving style. Whether the manual transmission can save fuel consumption depends entirely on the driver's driving skills. It's only a matter of time before you become a seasoned veteran.

I think when changing gears, you should step on the clutch lightly, never step on the brakes, and don't step on the brakes quickly, you must step on it gently, so that you can save fuel.

When changing gears, you can gently press the throttle to accelerate slowly and change gears in time. When driving normally, care needs to be taken to minimize the sudden acceleration as much as possible. In general, tap the throttle and change gears frequently. Reduce top speed and refuel.

Manual transmission cars should be well matched with oil separation. And when stepping on the accelerator or brake, it should also be slower, which is more fuel-efficient, and it should be at a constant speed when driving.

When driving a manual transmission car, you should keep the speed of the car at a constant speed, reduce the placement of heavy objects on the car, and keep a safe distance from the car in front, so that you can definitely save fuel.

Compared with a manual transmission car, it should be very smooth to drive, and do not give fuel violently. Keep it at a constant speed all the time, which will be more fuel-efficient.

Fuel-saving methods for driving a manual transmission car:

1. Maintain a reasonable driving speed.

Each type of car has its own economic speed, at which the fuel consumption is the lowest. However, the economic speed of ordinary cars is not high, and most of the commonly used economic speeds are 65 90km h.

2. When starting the cold car, try to avoid prolonging the engine heating time.

The heating time of the engine should not be artificially extended when the car is started cold, otherwise it will be counterproductive. Just take care not to drive at high speed immediately after ignition. You should walk slowly for a few minutes and then gradually increase your speed.

In winter, the slower driving time can be extended. Not now.

3. Avoid unnecessary idling.

Generally, a car that idles for more than one minute consumes more fuel than it does when it is restarted, so if you stop for a long time, you can turn off the engine.

4. Sudden acceleration and deceleration should be avoided as much as possible during driving.

Strive to maintain a steady speed while driving, and avoid sudden acceleration and deceleration. Don't slam on the accelerator to accelerate. This will only greatly increase fuel consumption, but will not save much time.