How to draw a small chassis in CAD?

Draw a little bit, enter L (straight line) (or directly with a line icon) space, left-click the mouse to determine the first point, enter the length (360), space.

This is the first straight line.

Move the mouse to the vertical direction and enter the length (180) space in the field.

And then continue to draw the frame.,Other command windows have.,The steps are in the instruction bar below the window.,Slowly get it.,Anyway, it's a little bit of drawing.,It's not very clear about this.,It's best to find a master.。。。

Generally, it is imported into other software after CAD is finished, rendering, and calculation.

I can't get on the picture.,There's no way.。。。 That's all it said.

Method 1: The easiest way is to take a picture of the real thing**, insert it into the CAD, and then copy it directly, as simple as a primary school student drawing! Of course, there is an error between the size of ** and the size of the real thing, and you need to actually measure the real thing for the specific size!

Method 2: If you want to use ProE, you should first draw the 3D model of the real thing in Proe, and then import it to CAD to form a 2D drawing, and then mark the size!!

Method 3: If you have any questions, you can go to the "CAD Master" post bar to ask questions, and professional CAD engineers will answer for you, I hope mine will help you!

Do you want to draw 2D or 3D? 2D screw drawing method is not very simple Can not be disassembled to draw the appearance of the picture is not on the line CAD import proe is very troublesome, it is recommended not to do this proe import cad is very simple (need to be modified appropriately to meet the 2D drawing standards) you have proe basics like the parts in the chassis general stretching, array, holes, chamfering, drafting, scanning and other basic operations are done, the chassis has a sheet metal function to draw the fastest.

Draw a 100 straight line along the four diagonal points vertically.

Connect the four lines one after the other to get the desired box.

In 3D space, execute the menu bar "View - 3D View - Southwest Isometric Side".

Draw a 1000x800 quadrilateral.

Select the drawn quad and right-click "Copy with Base Point".

Paste, moving down 100 from a point on the first quad.

Connect the upper and lower quadrilaterals to get the desired cuboid.

I think it's absolutely OK to draw more realistically, first use SOLIDWORKS 3D modeling and import it into CAD.

Yes, there are drawings, the design is reasonable and you can process, mainly considering the cost and processing technology, whether anyone is willing to do a single piece, what to do, etc.

You can make acrylic to make a board after the design is completed.

Having tools The most important thing about materials is to have a certain amount of hands-on ability.

Of course you can do it with acrylic sheet

CAD does not have high requirements for most computer configurations, except for memory modules, memory 8G is suitable. Others are in a normal configuration, or even slightly lower than the normal configuration.

I could, just fine, and make some cigarette money.

Hello landlord.

I don't know if you're using Auto CAD 2010 or Electronic Plates or Yaochuang or something else.

I'll use these apps too.

It is best to choose stable accessories for the design of the machine, and it is recommended to choose a first-line brand with reliable quality.

1. If it is only a two-dimensional plane design, and the number of lines is less than 8000, then the requirements are not very high.

The integrated graphics card can be satisfied, and there is no need for any professional graphics card mentioned above.

2. If the number of lines in your drawing exceeds 12,000, it is recommended to use a discrete graphics card.

3. If you want to carry out three-dimensional design, and there are more than 20,000 lines, the requirements are high, and it is recommended to use a professional graphics card.

I'll give you the configuration according to the medium requirements.

3 cores +5670 +2G + 500G configuration.

ProcessorAMD Athlon II X3 445 520 (licensed original package).

The performance of the triple core is more than 20% higher than that of the X2 255 E6500 and other dual-cores.

Motherboard MSI 870-C43 470 510 yuan.

Alternate Gigabyte 770T-D3L 510 540 yuan.

The new motherboard with 770 chips was only launched after November 2010.

Graphics card Dilan Hengjin HD5670 Extreme 2nd Generation 512M 490-530 Preferred.

Alternate: Xunjing Jingtai HD5670 (HD-567X-YNF) 490-510

Memory Kingston 2G DDR3-1333 (Licensed Boxed) 150 Lifetime Warranty.

The best compatibility, the best after-sales memory brandConventional alternatives are "Apacer" or "ADATA".

HDD WD5000AAKX 500G SATA3 16M (Blue Disk Box) 255

This is a new interface of the hard drive, oh three-year warranty.

Power supply FSP Blue Ocean 350 160 yuan The conversion efficiency is up to 83

Alternate: OC Triple Q5 Low Carbon 170 or Great Wall Silent Master ATX-350SD 160

Now the host rating of 230W is completely sufficient, and the margin is fully considered. All of the above are guaranteed by a three-year warranty.

Chassis optional 90 yuan Suggestion: Huntkey Parkson C611 or Colorful MT482 or Xianma Chasing Wind B8

Optical drive Samsung TS-H663D 165 24 times *** recorder.

Alternate Jianxing ihas 524 155 yuan.

Now the optical drive is not necessary, and the total price does not include the optical drive.

The total price is 2200 yuan.

The main components are all first-line brands, which fully meet your design requirements.

Oh, there are alternative accessories, I hope it will help you.

1. Operating system requirements: Windows7 SP1 (32-bit and 64-bit), including updated KB bits and 64-bit), Windows10 (64-bit only, version 1607 or later).

2. CPU type requirements: minimum GHz processor.

3. Memory requirements: minimum 8GB.

4. Display resolution requirements: minimum 1920x1080 resolution.

5. Graphics card requirements: minimum 1GB GPU, with 29GB S bandwidth, compatible with DirectX 11.

7. Other requirements:NetFramework version or later, Adobe Flash Player v10 or later, Google Chrome (for AutoCAD Web).

Buying a cheap professional graphics card helps a lot.

For AutoCAD, if it is installed in the XP system, 512 memory, single-core CPU 2 G or more, and integrated graphics card can be. With a computer without a monitor, it is about 2000.

,PLC programming uses the COM port,Now there are not many COM ports,Dell D630 can meet your requirements。

CAD needs to perform better first! Then the graphics card should be good first! The higher the video memory, the better! It would run smoothly that way!

Normal configuration is fine.

I think it's almost 2000