-
Anonymous users2024-02-12Dear Samsung users: According to your description, when there is a situation where the notebook won't boot, it is recommended to exclude it according to the following methods:1
Verify that the power indicator is on. 2.Observe whether the screen is lit up and whether you can see the Samsung logo screen with a blue background.
3.If you can see the Samsung logo screen, it is recommended to restore the default settings of the BIOS, that is, press F2 to enter the BIOS when the Samsung logo screen appears at boot, then press F9, select Yes, and then press F10 to save and exit. 4.
If the recovery BIOS is invalid, try whether you can enter safe mode, that is, press F8 on the Samsung logo screen when booting up, and select safe mode to enter. 5.If you can enter safe mode, it is recommended to uninstall the recently installed software program in safe mode, and observe the system after checking and killing viruses.
6.If the above operation does not work, it is recommended to reinstall the operating system and observe it (please back up your important data before reinstalling the system). 7.
If the system cannot be reinstalled or the reinstalled system is invalid, it is recommended to contact the authorized after-sales service center designated by Samsung for testing. If the power indicator of the notebook will not light up after pressing the power button, then you need to check whether the socket and power adapter have been turned on and plugged in, if there is no problem, then you need to contact the authorized after-sales service center designated by Samsung directly for testing. Samsung service center address.
-
Anonymous users2024-02-11Hello dear Samsung users:
Comments, suggestions, complaints, please click:
-
Anonymous users2024-02-10The computer is turned on, the fan rotates normally, and there is no signal from the monitor.
-
Anonymous users2024-02-09Samsung Laptop System Crash Can't Enter System Solution:
1. When the Samsung screen appears at boot, press F2 to enter the BIOS, then press F9 to select Yes, and then press F10 to select Yes to save and exit, and observe whether you can enter the system.
2. Press F8 when the Samsung screen appears at boot, select safe mode, if you can enter, it is recommended to uninstall the recently installed software program in safe mode, and observe after checking and killing viruses.
3. If the above methods are invalid, it is recommended to back up important data and reinstall the system.
-
Anonymous users2024-02-08If the Samsung laptop won't turn on, well, it may be that the motherboard is broken, and you can go to the repair center to take a look.
-
Anonymous users2024-02-07Please install genuine win10 system, caused by piracy detection system.
When the notebook fails to start, it is recommended to eliminate it as follows: >>>More
According to your description, please try it as follows:
1.Press the F2 button to enter the BIOS settings when the power is on, press the F9 key to restore factory settings, and press the F10 key to save and exit. >>>More
As you described, you can try it by following the steps below: >>>More
It has nothing to do with the settings.
This is called Crossfire technology, and it allows the discrete graphics card and the integrated graphics card to work together. But generally the discrete graphics card of this model is HD3470 This low-end graphics card, the performance is relatively poor, and the performance of the integrated graphics card is even worse, the synergy is very limited, and it will not bring significant performance improvement, it can only be slightly stronger than the HD3470 single graphics card, and it will not be essentially helpful for the improvement of game performance. >>>More
Hello: According to your description, Samsung N7102 supports the screenshot function, it is recommended that you refer to the following method to re-operate: >>>More