-
After the mobile phone is flooded, there will be a little water backlog in the speaker, so you can first turn the speaker down, hold the mobile phone and shake it a few times. Then wipe the speaker hole with a paper towel. Use a hair dryer to turn on the hot air and blow it on the speaker, don't blow it for too long, just about a minute.
If it is caused by water, it is recommended that users use a paper towel to wipe the speaker of the mobile phone, pay attention not to use force, and after making sure that there is no water, put the mobile phone in a cool and ventilated place to dry, and pay attention not to use the mobile phone during the period.
If this situation occurs after it has been dealt with, it means that it is a hardware failure, and it is recommended that the user directly contact the after-sales service for relevant testing, or find a mobile phone repair shop to clean up the speaker or replace the speaker.
Here's how to fix it:
1. After the mobile phone enters the water, there will be a little water in the speaker, you can first turn the speaker down, hold the mobile phone and shake it a few times.
2. Then wipe the speaker hole with a paper towel.
3. Use a hair dryer to turn on the hot air and blow it on the speaker, don't blow it for too long, just about a minute.
-
If you are using a vivo mobile phone, it may be caused by liquid ingress into the internal parts of the mobile phone, it is recommended to bring the mobile phone to the service center for testing and processing (customer service center address: enter vivo official website vivo**app--my--service outlets after-sales outlets--select provinces and cities to inquire about the address of the customer service center) It is recommended to call the customer service center in advance to confirm relevant matters and understand the working hours, so as not to delay valuable time.
-
After the mobile phone enters the water, there will be a little water in the speaker, you can first put the speaker down, hold the mobile phone and shake it a few times, wipe the sound hole with a paper towel, and use a hair dryer to turn on the hot air to blow on the speaker, don't blow for too long, about a minute.
The reason for the noise is that the frequency of the eardrum vibration decreases, which will make the dust attached to the speaker stick tightly to the eardrum, resulting in noise. It can be solved by cleaning the speaker and replacing the speaker.
Precautions for phone speaker cleaning.
Care needs to be taken to make a gentle circular motion on the speaker hole while applying a little force. Keep wiping until all the dirt is cleared out. If the speaker hole is large enough, press a cotton swab into the hole.
But don't press too tightly, just enough to insert the cotton at the tip of the swab into the slot. Once inserted, turn the swab back and forth while applying a little pressure.
Use a medium-hard toothbrush to clean the speaker. Tilt the bristles towards the top or bottom of the phone, parallel to the top of the phone, and move them up and down. Then clean the toothbrush vertically (parallel to the side of the phone) and move it from side to side.
The above content refers to People's Daily Online-Alcohol Wipe instantly increases the volume and charging speed of the mobile phone.
-
If you are using a Huawei phone, we recommend that you do the following:
1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.
2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.
3. Please take out the SIM card and microSD card.
4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.
Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.
2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.
3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.
After the cell phone gets into the waterSpeakersThere will be a little backlog of water in it, so you can first turn the speaker down, hold the phone and shake it a few times, wipe the speaker hole with a paper towel, and turn it on with a hair dryerHot airBlow into the speaker, don't blow for too long, just a minute or so. >>>More
First, unlock Apple 12, find the [Settings] icon of your phone, and tap to enter. >>>More
If you are using a vivo mobile phone, it is recommended to bring your mobile phone to the local vivo customer service center for testing and processing, customer service center address: enter vivo official website vivo**app - my - service outlets or vivo official website web version - bottom - service support - service outlets query - select provinces and cities to query the address of the customer service center. It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.
There is a sizzling print when the video is recorded, that's because it has been interfered with, you can see that it is the interference made by **, which may be a problem with the mobile phone itself.
Mobile phone speakers have perfect waterproof, dustproof, and vibration-proof performance, if only the speaker enters the water, it will generally not affect the future service life after drying, so there is no need to worry. >>>More