-
The finger joint board is beautiful, but it needs to be painted on site, and the paint-free board is environmentally friendly, but the closing is not beautiful.
-
Due to the different processes of the integrated board, this kind of board has superior environmental performance. 2. Blockboard: good moisture-proof effect, can not be directly painted.
The blockboard is made of natural wood strips in the middle and glued with thin veneer on both sides, which is one of the most important materials for making wooden counters. This type of wooden counter can be used as a structure for the middle façade of the showcase, a structure for the wooden door and façade, and so on. They are very waterproof, and their structural and supporting capabilities are also very strong.
Because the wood grain exposed on the surface of the blockboard is not very beautiful, it is rarely painted directly. 3. Medium density board: good flatness.
MDF is made from wood flour wood chips. MDF has good flatness but poor moisture resistance. In contrast, MDF has a poor grip on the nails.
When the screws are tightened, they can easily loosen. Because MDF is not strong, it is difficult to fix it again. So it is rarely used to make cabinets.
-
Introduction: With the improvement of living standards, it is also very emotional to have a drink. And many people still store alcohol at home. If you want to store wine, a good wine cabinet is indispensable. So what materials are good for wine cabinets? Let me help you out.
At present, there are three main materials of wine cellar wine cabinets: oak, pine and stainless steel. Oak is mainly used in wine rack wine cabinets, which is conducive to the storage of red wine; Solid wood materials such as pine are also good, but they should be considered wooden. density and hardness, so that it can be more durable and stand the test of time; Compared with the above two, the price of stainless steel is relatively cheap and the practicality is wider.
In terms of material, if the wine cabinet is placed in a family bedroom or hotel room, it is better to choose a semiconductor wine cabinet; If it is placed in the living room, kitchen and other places, the noise requirements are not too high, and the noise of the compressor wine cabinet is also limited to an acceptable range, then the compressor wine cabinet and semiconductor wine cabinet can be used; If it is placed in an office building and other places, and you need to take wine frequently instead of storing it for a long time, then it is better to choose a semiconductor wine cabinet; If it is placed in hotel halls, clubs, villas, wine merchant stores, shopping malls and other places, it is better to choose a compressor wine cabinet, which is not only conducive to the maintenance and improvement of wine quality, but also appears to be high-grade and has a good brand image.
The compressor is the heart of the wine cabinet, and the quality of a wine cabinet is a decisive factor. As mentioned earlier, vibration is a negative factor affecting the storage of red wine, if the compressor is not quiet enough, and the cabinet material is too light and not stable enough, then a wine cabinet will drive the overall vibration due to the vibration of the compressor, which will make the wine always in a slight vibration environment, there is no way to sleep well, and the red wine that may be woken up anytime and anywhere is in danger.
If you are a professional wine collector or wine merchant, it is recommended to use a compressor wine cabinet, which is characterized by fast refrigeration, good effect, stable performance and long service life, especially suitable for professional wine storage. If you are an ordinary wine lover or a newcomer to wine, it is recommended to buy a semiconductor electronic wine cabinet.
Humidity control is also an important part of a good wine cabinet, because humidity can affect the cork, and the wrong humidity can make the cork crack or rot, which can have a fatal effect on the wine. The humidity suitable for red wine storage is between 65% and 75%, while the average humidity in a wine cabinet without humidity control is about 55%, which can easily dry out the cork. Humidity control is a high-end design for wine cabinets, and not every unit has it, so it's a good idea to ask if this feature is available before buying.
Seeing this, I believe that everyone has some understanding of the question of "what materials are used in the wine cabinet", which is convenient for future choices.
-
Commonly used wine cabinet boards are: moisture-proof boards, which are compressed from wood pellets; Large core board, which needs to be veneered; MDF, MDF is divided into several types, and composite boards are generally used; Woodworking board, which can be mortised and tenoned, is convenient for construction, but not environmentally friendly. The details are as follows:
1. a moisture-proof board.
The moisture-proof board we are talking about is also called a compression board, which is made of wood pellets compressed inside, and glue is added, and the outside is a very hard plastic shell, such a board is actually not very healthy, because the glue will release a certain amount of formaldehyde, although many people say that this type of board is very green, but the glue contains formaldehyde, it is better to choose a solid wood board.
2. A large core board.
If you use a large core board to make a wine cabinet board, then you need to paste the panel, and the panel will definitely be painted and sealed to cover the board, so that the envy of the book will increase accordingly, and the pollution of the large core board to make the wardrobe is also very large, so when choosing, we are still cautious.
3. MDF.
MDF, divided into several kinds, about the thickness, there are a lot, if it is a wine cabinet, then generally use composite board, composite board is divided into single-sided, double-sided, and some are patterned, however, the composite board will let us see some nail holes, very unsightly.
4. Woodworking board.
The woodworking board can be connected with silver in the mortise hall, nails and screws, and the construction of the woodworking board is very convenient, but its surface treatment is the most troublesome of these types. The disadvantage of woodworking board is that the environmental protection is very low, and it is easy to cause indoor formaldehyde pollution.
-
It is best to make the cabinet with solid wood.
The use of solid wood to make wardrobes avoids the use of too many adhesives, which is more healthy and environmentally friendly, has strong load-bearing capacity, is safe and stable, and has a long service life.
It can reach more than 500 of ordinary board wood wardrobes, which are durable, but the cost of solid wood wardrobes is higher, so most of the wardrobes on the market use board or board solid combination to make wardrobes.
Cabinet panels:
The large core board is also a good choice, the large core board is a plywood with a solid wood core, the inner layer is a core made of strip-shaped logs, and then pasted on the outside to make of materials, the surface is smooth and flat, and the stability is strong. There are also MDF, woodworking board, and machine puzzle (a type of board made of solid wood).
The first step of plate decoration is to have a good design, Jutong decoration is completely tailored in accordance with the customer's actual space combined with the customer's life requirements, each household customizes exclusive 3D renderings, what you see is what you get, that is, the resulting space effect has on-the-spot reduction. <>
-
At present, the types of boards that can be used as cabinets on the market are: solid wood boards, particle boards (particleboard), multi-layer boards, MDF, finger-jointed boards, etc., and the advantages and disadvantages of various boards are listed below.
Solid wood board: the advantages are that it is a natural log, with good environmental protection, longer service life for furniture, relatively good waterproofness, and valuable wood species and collection value. The disadvantage is that the natural material and the texture cannot be unified.
First, the highest quality and high maintenance cost.
Particle board: the advantages are smooth and flat surface, relatively high environmental protection coefficient, suitable for processing, and not easy to deform. The disadvantage is that the moisture-proof performance is poor, and it is not recommended to use it in relatively humid places such as balconies, kitchens, and bathrooms, and the transverse force strength is not very good.
Multi-layer board: The advantage is that it is waterproof and can be used in toilets, balconies, kitchens and other places. The disadvantage is that the same level of board, the environmental performance is worse than that of particle board, easy to deform, and it is not suitable for high height door panels.
MDF: It is often used to make a door panel with shape, but the environmental performance is poor, so you must pay attention to choosing a good manufacturer when purchasing.
Finger jointing board: good environmental performance, only suitable for on-site furniture, poor nail holding ability, not suitable for long door panels, easy to deform.
Custom all-aluminum. Choose aluminum and wood for the wardrobe door. Aluminum-wood here refers to all-aluminum wardrobes or multi-layer solid wood panels + all-aluminum. >>>More
Now there are many boards on the market that can be used as wardrobes, and I think it is more environmentally friendly to use solid wood ecological boards.
Nowadays, home decoration is concerned, and it is usedMalaccaEco-boards to make wardrobes and kitchen cabinets can be said to be a very common situationFor the on-site production of the materials you buy, you must comprehensively consider what glue and what nails to use to close and fix the edges, and only by considering all these key links can the cabinets and wardrobes made of the Malacca eco-board be beautiful and easy to use. >>>More
A wardrobe is one of the essential pieces of furniture in your home. Now the wardrobe, not only used to store clothes, but also a house decoration, a reasonable wardrobe to create can instantly enhance the overall style of the house, highlighting the taste and quality of life of residents, with the increasing aesthetic and quality of life, more and more people choose private customization, so is the ecological board suitable for custom wardrobe or multi-layer board is more suitable? >>>More
1. Flexible mortar.
One of the common materials for waterproofing is flexible mortar. The main material of flexible mortar is emulsion and mortar, which are blended according to a certain ratio and have a certain elasticity, and the advantage of this material is that even if the base layer is deformed and cracked, it will not affect the waterproof effect of the flexible mortar. However, it cannot be used on the top surface as a backwater. >>>More