Family history than folding cloth wardrobe assembly tutorial How should the folding wardrobe be inst

Step 1: Install the equipment.

When buying a folding wardrobe, it is recommended that consumers first ask whether the merchant has a marked number on the equipment, if so, the process of installing a folding wardrobe will be much easier, and consumers can put the number of the equipment together for backup.

1.Bottom seat of the plate, interface mounting. The general interface is divided into aluminum alloy interface and plastic interface, the former is generally used with screws, and the latter can be directly used for practical purposes.

The two interfaces are similar for the folding wardrobe in a short period of time, but after a long time, the poor quality plastic interface will burst, resulting in the hidden danger of the stability of the folding wardrobe, so consumers should carefully consider the material of the interface when choosing the folding wardrobe.

2.After the board is assembled, please make sure that the diagonal error of the folding wardrobe cabinet is within plus or minus 1mm.

3.After the folding wardrobe cabinet is placed in place, please use a level ruler to measure whether the cabinet is horizontal, if it is not horizontal, please adjust it to a horizontal position, and the common method is to pad things under the cabinet.

4.After folding the wardrobe cabinet body, it can be installed in turn: clothes rail, stacking area, door panel, etc., this step is the easiest, and the consumer can install it in the last step.

Step 2: Installation process.

1.Find the low-priced parts of the assembled components and put them together according to the folding wardrobe booklet. Consumers should be enough in this regard, the bottom part must not be mistaken, mistakes will not only cause the hidden danger of folding wardrobes, if reinstalled better to cause damage to the interface.

If the folding wardrobe has a tripod, the tripod should be partially installed first.

2.Install the other pipes of the folding wardrobe, the installation is not difficult, but you should pay attention to the strength, if the force is too large in the process, it will cause the wardrobe to shake, and it will also cause the interface to burst.

3.After the overall frame of the folding wardrobe is installed, the cloth is installed from top to bottom according to the frame. Nowadays, many businesses are designed to be more user-friendly in this regard, and they are connected to each interface with Velcro, so that consumers can put it on at the end of the installation, which is convenient for the installation of folding wardrobes.

Open the zipper of the cloth and pull open the place where the middle is glued, with the bottom facing down. There are some small holes dug in the bottom of the cloth, and the cloth is pulled down from top to bottom along each vertical pipe according to each hole. You can skip pulling to the bottom for now.

If you want to know more about cloth wardrobes, please pay more attention to the family life network, which will provide you with more complete, detailed and updated information.

Installation: 1When installing, the cabinet is facing downwards and starts installation from left to right or right to left.

2.After the plate assembly is completed, please ensure that the diagonal error of the cabinet is within plus or minus 1mm. 3.

After the diagonal measurement is completed, please mark the position of the shelf or vertical plate of the back plate to be nailed on the two sides of the plate (side plate) to facilitate the nailing of the back plate. 4.After the cabinet is placed in place, please use a level to measure whether the cabinet is horizontal, if it is not horizontal, please adjust it to a horizontal position, and the common method is to pad things under the cabinet.

5.Once the cabinet is level, it can be installed in turn: clothes rail, drawer, door panel or sliding door, after the retractable clothes mirror, and then install the handle according to the requirements.

Cloth wardrobe assembly package pure macro bracket to make the base of the laugh book, finishing the cloth and the frame and finishing the cabinet cloth and other steps.

1.Install the base. First of all, the steel pipe of the base part should be assembled according to the instructions, if the base is equipped with a shoe rack part, install the base and then install the shoe rack part.

2.Finishing cloth. Open the zipper or adhesive part on the top of the cabinet fabric, and there will be many small holes at the bottom of the cabinet cloth to connect the steel pipe with the small holes at the bottom of the cabinet cloth.

3.Frame and cabinet cloth. Install the steel pipe on the base, and then pull the cabinet cloth up gradually in the order from bottom to top until it is completely installed, and then adjust the cloth cover on the top.

How to assemble a simple cloth wardrobe? If you don't know, check out my sharing! Here are the detailed steps, I hope it will help you!

Simple cloth rough sail wardrobe installation accessories preparation. When the simple wardrobe is bought, the steel pipes are marked with numbers, and they can be put together with the same number.

Then find the parts of the bottom frame of the simple cloth wardrobe and put them together, note that it is only the tribal stool at the bottom of the simple wardrobe. Then place the position of the simple wardrobe sorting panels.

The bracket needs to be assembled first, and the assembly method can be used first up and then down. When installing, pay attention to the long break of the plastic parts that are connected downward, so that the assembly of the wardrobe is more firm.

When the bracket is assembled, you can start to put the cloth bag of the cloth wardrobe up, at this time remember to start from the bottom half of the set, which will facilitate the final connection.

After the assembly of the second half is completed, the upper and lower parts of the bracket can be connected together in the megamatch, so that the assembly of the simple cloth wardrobe is completed.

1.Install the bottom first.

First, install the bottom of the middle, take out the bottom heel high cross-joint, and connect it with a short pipe in the middle. Install a four-way joint on each side, and then install the pipe on both sides, and decide where to put it, one side of the long pipe, and the other side of the short pipe. Then install the base cloth on both sides at the same time, and then install a tee joint on each side.

2.Set of wardrobe cloth covers.

After installing the bottom, plug in six short steel pipes, and then put the whole wardrobe cloth set up against the holes around it. Then install a layer of partition like the bottom, and then put it on top of six steel pipes.

3.Install the floor on the short side.

If the wardrobe is divided on both sides, first install the short side of the floor, first plug in the side steel pipe, then install the partition, and then connect the four-way joint, then install two horizontal steel pipes, then install the partition, and then fill the four-way joint on both sides. Repeat the partition until it reaches the topmost layer.

4.Install the steel pipe with the long side.

After the short-side partition is installed, the long side is a vertical coat-on-hanger area, and the two long tubes are connected by a tee joint in the middle until the top.

5.Install the top steel pipe.

After both sides are installed, they are directly connected with long steel pipes, so that the wardrobe is installed. If the wardrobe is too high enough to squeeze enough, it is recommended to push it backwards. So as not to be installed. At the same time, the garment steel pipe can also be installed with hook joints, which is relatively simple.

6.Set of wardrobe cloth covers.

When the top of the large set, it is best to pull the bottom to the top, so that there is space to pull the top until the upper corner is installed diagonally, at this time you can pull the cloth cover down, so that the wardrobe is installed.

It's very simple, generally the new one will have instructions If not, then refer to the following steps: 1, first put the half of the oil base and fix it with screws. 2. There is a part of the hollow rod (a longer part) that is inserted upside down on the base.

3. Finally, the top is similar to the link method of the base (after the top is finally installed, the cover can be pulled down.)

How to assemble a cloth wardrobe with nine small pockets on the side.

Cloth wardrobe installation steps**, 108 cloth wardrobe installation.