How to deal with the squeak of the door stopper

1. It may be that the door limiter has been used for too long and caused rust or deformation, and the owner can properly use special lubricating oil to lubricate it;

2. It may also be due to the abnormal sound caused by the loosening of the inside of the limiter, which needs to be tightened;

3. There may also be noise caused by the inner panel of the door not being fixed or stuck.

There are two kinds of common door limiters, namely torsion bar spring limiters and pull rod limiters, from the production cost or maintenance costs, the pull rod limiter is better than the torsion bar spring limiter, naturally more common, but the limit effect of the pull bar limiter is not as crisp as the torsion bar spring limiter, the performance is more linear, and some cars feel that the limit is obvious and some cars are not obvious.

The function of the door limiter is to limit the degree to which the door can be opened, on the one hand, it can limit the maximum opening of the door and prevent the door from opening too much, on the other hand, it can keep the door open when needed, and if the car is parked on a ramp or when it is windy, the door will not be closed.

There are two kinds of common door limiters, namely torsion bar spring limiters and pull rod limiters, from the production cost or maintenance costs, the pull rod limiter is better than the torsion bar spring limiter, naturally more common, but the limit effect of the pull bar limiter is not as crisp as the torsion bar spring limiter, the performance is more linear, and some cars feel that the limit is obvious and some cars are not obvious.

When these moving mechanical structures lack lubrication, they produce abnormal noises, and many doors make abnormal noises when they are opened and closed. In addition, many car owners also reported that after washing the car, the abnormal sound of the door limiter is particularly obvious, which may be due to the water in the door limiter, resulting in poor lubrication.

How to deal with the squeak of the door stopper

The easiest way is to use lubricating oil such as butter for lubrication and rust prevention, and you can also use grease, which is not expensive, not to mention that hinges and door limiters will often be used, so it is recommended that car owners need to buy grease to reduce friction and wear of mechanical parts and prolong fatigue life.

What to do if the door stopper creaks? The cause of the creaking of the door stopper is as follows: the door hinges and stoppers are worn out and the noise caused by dust and dirt sticking to the gaps.

Due to the perennial opening and closing of the door hinge and limiter, it is easy to wear out over time, and dust will accumulate in it, which will cause vibration and abnormal noise in the process of opening and closing the door. The following is the solution to the abnormal noise of the door limiter: 1. Replace the limiter:

The door limiter is damaged by force deformation and needs to be replaced. 2. Reduce the wear and tear of the limiter: the wear of the limiter or the limit function is reduced, and the limiter is replaced according to the situation.

3. Wipe the lubricating oil: the solution is to apply oil, the easiest way is to use lubricating oil such as butter to lubricate and prevent rust, reduce the friction and wear of mechanical parts, and prolong the fatigue life. @2019

How to solve the abnormal noise of the door limiter What is the cause of the abnormal noise of the door limiterThere are many reasons for the abnormal noise of the door stopper, and the common ones are insufficient lubrication of parts, deformation of the baffle, improper assembly, etc., as follows:1. Lack of lubrication of the parts, if there is a lack of lubrication, the friction between the plug and other accessories can cause some abnormal noise.

In this case, apply lubricating oil such as motor oil to the junction of the limiter or hinge to reduce friction. 2.The plug is deformed.

Improper use by the owner or a traffic accident may cause the limiter to be deformed. In this case, it is necessary to go to a repair shop for repair, or simply replace the plug. 3.

Improper assembly, some cars leave the factory with quality control issues. For technical reasons, the stopper may not be installed in the correct position and cause abnormal noise. In this case, it is necessary to go to a repair shop or 4S shop to reassemble.

If this happens to the new car, you can claim compensation from the 4S store if necessary. About Limiters: Door limiters are to limit changes in the position of the door.

When the door is stressed, it restricts the rotation of the door and prevents the door from opening automatically. There are two main types of stoppers, namely spring stoppers and torsion spring stops. @2019

<> "Door limiter is a device that every door has, and the main function of the limiter is to limit the degree of opening the door, so as to avoid excessive opening of the door and fix the amplitude of opening the door. So what to do with the abnormal noise of the car door limiter?

When there is an abnormal sound in the door limiter of the car, it is likely to be caused by insufficient lubrication, in this case, we can use grease to apply the abnormal noise position, and the problem of abnormal noise can be solved well after sufficient lubrication.

In addition, if the door stop is worn or the door is sagging, it will also cause the wear and tear of the limiter, resulting in abnormal noise, and it is necessary to replace the limiter with a new one.

Many vehicles are manufactured when the limiter may not be installed in place, resulting in abnormal noise. You can go to the 4S shop or repair shop for reinstallation, and if necessary, make a claim to the 4S shop.

When the owner improperly uses the door of the vehicle, it will cause the limiter to deform and produce abnormal noise, at this time it is necessary to go to the repair shop for maintenance, and the limiter needs to be replaced if necessary.