What to do if the surroundings of the car are not smooth after repairing the paint?

What to do if the surroundings of the car are not smooth after repairing the paint? If you want to go to a regular 4S shop to repair it, it is not smooth, they are responsible, and they must deal with it for you until you are satisfied.

The solution to the non-smooth car paint brush after repair is as follows:

1. To clean the scratches, you must first completely remove the rust, dirt and grease on the paint surface, and you can first use very fine water sandpaper dipped in water to gently grind off the rust spots, and completely wipe them off to ensure that the rust will not expand;

2. Soak the No. 2000 water sandpaper in soapy water for 20-30 minutes to make it softer, so as not to cause great damage to the paint surface of other original cars;

3. Clean up the surface dust, fix the sandpaper with a sandpaper pad, dip it in water and gently polish the paint surface of the scratch until the paint surface is consistent with the surrounding height.

1. The industry uses 2000 water sandpaper for polishing. If you are more cherished, you can choose a higher grade, but the time you grind will be significantly longer. You can choose up to 5000 numbers, and after you feel that there is no problem, you can use car wax to restore the luster after cleaning;

2. Buy a spray can, they should have water sand paper and nizi to send, first polish with gauze paper, then use nizi to make up, dry, and then use gauze paper to polish flat, and then use a paint pen and matching oil to mix together and shake well, spray with a spray can, and the distance will be even.

The first is that the quality of bright oil is not good, the second is that the spraying process is not standardized, these two problems waxing and polishing can only be re-painted, the third is due to the poor painting environment, the surface of the bright oil is dirty, you can use the method of waxing and polishing to restore the luster, and there is a simplest way is to polish a large area, but it will not completely change, and the paint is always different from the original paint.

This situation is very common, it should be that when spraying paint, other places are not well covered, and then the flying paint when spraying paint is stained.

This is generally caused by the master's carelessness. It is recommended that you go back to the repair shop immediately and ask for treatment, the sooner the better. Generally, it can be dealt with in several ways, the first is to slowly wipe it little by little in the car wash, and it must be fully washed after the car is cleaned, and then dipped in water and wiped little by little.

Another method is a simple and crude direct polishing. However, it cannot be polished often, otherwise it will cause some damage to the car paint.

If the car is repainted after scratching and then the surrounding area is not smooth, it may not have been done well when it was sprayed, you can find a paint shop and ask them to do it again.

If the car is not smooth around after the paint is touched, you can wax all the body by waxing, so that it will be very smooth and shiny.

If your car is repaired with paint, the surrounding area is not smooth, then it means that you have not dealt with it well, and you must treat the repair place smooth before spraying paint.

If the car is not smooth around after touch-up, then you can also polish it, which will make his paint smooth and smooth.

What to do if the surroundings of the car are not smooth after repairing the paint? This situation can be done to the repair of the car after the paint, what if the surroundings are not smooth? In this case, can I go to the repair place for polishing?

After he is polished, the brightness around you will be very bright.

If the car is not smooth around the paint after repairing it, it means that the quality of the paint is not so good, so he is not smooth.

Polishing and waxing can be performed.

Polishing is a method of removing scratches and rough uneven parts on the surface of the paint through grinding wax and polishing machine, polishing can grind off the aging paint film of the paint surface, so that the new paint film is produced and restored to brightness. After polishing, waxing or glazing can achieve better results.

Polishing process: 1. Wash the car and remove iron powder and impurities.

2. Inspect all paint surfaces to confirm the degree of defects such as scratches, oxide layers, acid rain spots, dust spots, and orange peels on the paint surface.

3. Cover the area that needs to be painted.

4. Grinding, grinding is the use of abrasives to solve the deep problems that affect the appearance of the paint surface, such as oxide layer, streaks, pollution, and fading.

5. Polishing, polishing is a process after grinding, which is different from the role of grinding. Grinding is to flatten the paint surface to remove deep pollution such as stripes and oxide layers; Polishing is to further smooth the paint surface after grinding, remove the residual stripes of grinding, and the moisturizing ingredients in the polishing agent penetrate deep into the paint surface to make the paint surface show a soft own luster. The polish can also be used alone to remove minor oxidation and dirt.

I would use a hard object to scratch the paint area twice, and then find insurance and go to the 4S shop to repair the paint, which is really uncomfortable, but it is a good way.

The reasons for the unsmooth surface after painting 1, improper surface treatment before painting, not thoroughly cleaned 2, poor spraying environment, poor light 3, inferior diluent or improper use of ratio 4, improper painting technique, too fast 5, too large distance from the spraying surface 6, too high ambient temperature of spraying 7, too large air pressure for spraying, improper adjustment 8, poor substrate grinding, poor surface handling, uneven surface not enough, improper sanding sandpaper.

There are three reasons why the paint surface is not smooth after painting, the first is that the quality of bright oil is not good, the second is that the spraying process is not standardized, these two problems waxing and polishing can only be re-painted, the third is due to the poor painting environment, the surface of the bright oil is dirty, you can use the method of waxing and polishing to restore the luster, and there is one of the easiest ways is to polish a large area, but it will not completely change, the paint is always different from the original car paint, there is nothing else to do, it is difficult to get it yourself.

My car has also been painted, I went to the 4S shop to repair the paint, this situation also happened, no way, after he left the light a little better, but it is definitely not as good as the original.

Either the foundation is not flat, or the painting technology is not good, these two are no problem, that is the difference between spray paint and baking paint, if you do not bak paint, it is best to choose to spray in the summer high temperature weather, the fluidity of the paint is good, it can be evenly distributed, and it looks relatively smooth.

It is likely that the bottom is not smooth in the first place, it may have been uneven, you can confirm it yourself, fix it in time if there is a problem, and polish it in time if there is no problem.

My front bar was rubbed, 4s**700 up, said to remove it and look at it again, and finally went outside to get it, jet + sheet metal 350, it feels the same as the original factory after getting it, 4S shop still has hard power.

I also sprayed myself, the original paint surface is very smooth, after respraying, carefully look at the surface uneven, and then I only went to the 4S shop, the man didn't say anything, just sprayed me again, it's nothing.

I've encountered this situation before, I went to the Internet to search for it, and they all said that this should be waxed, and the effect may be relatively better, but if it is not smooth, it can also be properly polished, which is actually okay. But I can't get it myself, I really can't help it, and then I gave the spray paint master to play **, the paint master said to come over to give me some wax, grinding it will be smooth, I didn't expect to really get it for me, or find a professional person is more reliable.

I didn't know about this thing before, and then I was not good at spraying paint myself, and then my friend recommended it to me, and this is really good.

Waxing and polishing. This is the easiest way, I guess it's the only way, this kind of thing doesn't seem difficult, but in fact, it requires technical work, and it's better to find someone to get it.

It can be cleaned with clean water, or it can be cleaned with some glass water, which will make the paint very clean.

Probably you need to pour a special cleaning solution on top of the rag, and use the cloth to gently wipe the car paint, don't use a brush to brush hard.

You can first put the car wash liquid on the car and then wash it with a tool, this method can make the car very clean.

Summary. Hello, there are three reasons why the paint surface is not smooth after painting, the first is that the quality of bright oil is not good, the second is that the spraying process is not standardized, these two problems can only be re-painted due to the poor painting environment, the surface of the bright oil is dirty, you can use the method of waxing and polishing to restore the luster. Hope it helps.

Not smooth after painting. What to do..

Hello, there are three reasons why the paint surface is not smooth after painting, the first is that the quality of bright oil is not good, the second is that the spraying process is not standardized, these two problems can only be re-painted due to the poor painting environment, the surface of the bright oil is dirty, you can use the method of waxing and polishing to restore the luster. Hope it helps.

Can polishing be rough and smoothed?

OK. What kind of method do individuals use to polish it?

1. Fill the soil, 2. Mix paint, 3. Varnish. 2, 3 hours will do. It won't take too long.

If it's a large area of touch-up, it will take a while. After all, there is a certain degree of difficulty in mixing paint, and the paint returns to the year, and the use environment is different, so a skilled master will adjust the color to be more consistent, and the paint mixing work is very long. Large-area touch-up needs to be carried out in a dust-free environment, so as not to get dust into the paint, and the steel plate will cause the paint to be poor, or easy to peel off, which will take 2 to 5 days.

Check and polish the paint surface after the car is repaired with a touch-up pen: due to uneven hand force, it is likely that the paint surface will be uneven, or the color will be slightly uneven. Don't rush to deal with it immediately, remove the tape first, wait for 2 to 3 days, gently wipe it with wet suede or car wash sponge, then apply abrasive wax, and gently grind until the paint surface returns to smoothness.

As long as the paint is irradiated by the sun, no matter what color of paint, the pigment will fade, and then the additives are very important. Additives are expensive.

The quality of the additives determines how the paint feels, for example, the paint that begins to fade significantly will remain shiny and new for 5 years after the additives are added. But there is also no paint that does not fade. The body should be evenly faded as much as possible, and different parts of the body should not be fading to varying degrees.