-
Anonymous users2024-02-12How long have you been buying your car? There are two reasons, one is that the iron sheet inside is used for defective goods, and it is rusty. The other is the unqualified car paint, and the first one may be larger. If you don't get the paint off, you still don't want to deal with it, and if you deal with it, you have to remove the pimple piece and spray it anew.
-
Anonymous users2024-02-11This should be the bottom is not done, it is sprayed if it is not dry, and there is gas in it after a long time or the temperature rises, and it swells out to form a granular bulge, and it can only be re-polished and painted.
Hope this helps, please!!
-
Anonymous users2024-02-10There are two reasons, one is that the iron sheet inside is used for defective goods, and it is rusty. The other is the unqualified car paint, and the first one may be larger.
-
Anonymous users2024-02-09You need to go to the 4S store to negotiate, if it is not very serious, just throw the light on the new car. However, if it is already a product quality problem, the seller needs to propose a solution.
-
Anonymous users2024-02-08I didn't spray it well, but it took too long, so let the 4S store deal with it simply.
-
Anonymous users2024-02-07Small bumps in the newly sprayed car paint are definitely abnormal and belong to the quality problem.
If this happens, it means that the repair shop is not professional and there is no professional painter. If you follow the normal operation process, scrape putty, bottom spray, and spray up, basically there is no such problem. This kind of problem can basically eliminate the problem of paint, most of which are not adjusted and operated.
Therefore, you must find a repair factory to deal with it, and you may generally do polishing.
-
Anonymous users2024-02-06Summary. If there are a lot of small particles on the surface of the car paint, first clean the car surface, clean it with water and car washing liquid, and then polish the car surface with a polishing machine, the polishing machine can remove the small particles on the car surface, the polishing effect of the polishing machine is better, after polishing, you can use the car care agent for care, the care agent can protect the car surface and make the car surface smoother, and finally, you can use the car wax for care, the car wax can protect the car surface and make the car surface brighter, The above is the treatment method of many small particles on the surface of automobile paint.
If there are a lot of small particles on the surface of the car paint, first of all, you must clean the wide and simple surface of the car cousin, clean it with water and car washing liquid, and then polish the surface of the car with a polishing machine, the polishing machine can remove the small particles on the surface of the car, the polishing effect of the polishing machine is better, after polishing, you can use the car care agent for care, the care agent can protect the car surface, make the surface of the car more smooth and good, finally, you can use the car wax for care, the car wax can protect the car surface, make the car surface brighter, The above is the treatment method of many small particles on the surface of automobile paint.
I'm sorry I don't understand, but can you elaborate on that?
Reasons:1Small particles on the surface of automotive paint may be caused by the aging and wear of the surface of automotive paint or the influence of the external environment on the surface of automotive paint.
2.Small particles on the surface of the car paint may also be caused by the car paint surface not being maintained in time or the car paint surface not being repaired in time. Workaround:
1.Clean the surface of the car paint, wash off the small particles on the surface of the car paint with clean water, and then wipe the surface of the car paint with a damp cloth to keep the surface of the car paint clean. 2.
To repair the surface of the automobile paint, fill the small particles on the surface of the automobile paint with the surface repair agent of the automobile paint, and then polish the small rubber and particles on the surface of the automobile paint with a polishing machine to keep the surface of the automobile paint smooth. Personal Tips:1
Regularly maintain the surface of the car paint, and repair the small particles on the surface of the car paint in time to keep the surface of the car paint smooth. 2.Try to avoid the surface of the car paint being affected by the external environment, such as sunlight, rain, etc., in order to keep the surface of the car paint smooth.
-
Anonymous users2024-02-05Summary. Hello, this depends on whether the paint surface is damaged, if the paint surface has been damaged, it can only be re-painted, if the paint surface is not damaged, this can be repaired without traces.
Will this paint fall off? Can I leave it without treatment if the paint does not fall off?
Will this paint fall off? Can I leave it without treatment if the paint does not fall off?
In this case, the wire has rusted, and if it is treated, it needs to be re-treated and then painted. That's how it goes. 【】
Hello, this kind of problem is generally caused by the fact that the pre-treatment of the vehicle painting is not well treated, resulting in rust on the bottom of the car and small bumps on the surface of the paint. 【】
Hello, this depends on whether the paint surface is damaged, if the paint surface has been damaged, it can only be re-painted, if the paint surface is not damaged, this can be repaired without traces. 【】
The place where the pimple rises is on the fuel tank cap.
Will this paint fall off? Can I leave it without treatment if the paint does not fall off?
In this case, the wire has rusted, and if it is treated, it needs to be re-treated and then painted. That's how it goes. 【】
Hello, this kind of problem is generally caused by the fact that the pre-treatment of the vehicle painting is not well treated, resulting in rust on the bottom of the car and small bumps on the surface of the paint. 【】
Hello, this depends on whether the paint surface is damaged, if the paint surface has been damaged, it can only be re-painted, if the paint surface is not damaged, this can be repaired without traces. 【】
Will this paint fall off? Can I leave it without treatment if the paint does not fall off?
In this case, the wire has rusted, and if it is treated, it needs to be re-treated and then painted. That's how it goes. 【】
Hello, this kind of problem is generally caused by the fact that the pre-treatment of the vehicle painting is not well treated, resulting in rust on the bottom of the car and small bumps on the surface of the paint. 【】
Hello, this depends on whether the paint surface is damaged, if the paint surface has been damaged, it can only be re-painted, if the paint surface is not damaged, this can be repaired without traces. 【】
The rusty bulge of the car paint should be removed from the bulge paint surface, do anti-rust treatment, and then fill the putty, then wait for the putty to dry thoroughly, then polish and smooth, and finally spray the car paint. If there is a bulge in the car paint, the quality of the car paint or the operation of the paint repair, you can make a claim, it is best to go to a regular professional repair shop or 4S shop for appraisal and find a professional to deal with it. >>>More
In the light, one can observe threads on the paint, but they are usually not easy to touch. Such fine scratches can be easily removed with wax and fine cutting abrasives such as mirror polishing wax. Because the abrasive is fine to the nanometer level, it will not destroy the original protective layer of the car paint. >>>More
The paint bulges, there may be a quality problem with the paint, or it may be in the process of repairing the paint, the primer is sprayed before it dries, and there is moisture between the topcoat and the putty, and if it is evaporated by high temperature, air will appear, resulting in the paint bulging; In addition, it may also be caused by rust caused by moisture in the metal area under the paint. If the paint bulging is not dealt with in time, not to mention the impact on the appearance, the bulging area will slowly expand, and finally lead to the paint cracking and falling, which will damage the body, repair trouble, and expensive. >>>More
Kelp is the ingredient we often eat, the edible use value is very high, the usual edible kelp is all dried kelp, must be soaked in water, clean the salt content of the outer skin and dirt to carry out cooking. When the kelp is just soaked in water, it is normal for the hot bubbles caused by its own moisture absorption. If the soaking time is long, the kelp bubbles rot, rancid, and causes bubbles, and it is inedible! >>>More
What is the cause of the unevenness on the surface of the car paint film? There are two reasons, one is that the iron sheet inside is used for defective goods, and it is rusty. The other is the unqualified car paint, and the first one may be larger. >>>More