Can I remove and redo the sewing agent after a long time?

Updated on home 2024-07-13
13 answers
  1. Anonymous users2024-02-12

    OK. The beauty joint agent is the beautification product of the tile gap, the beauty joint agent does not have the effect of beautification and the role of caulking, the beauty joint agent replaces the original traditional caulk and grout and white lime, the beauty joint agent is impermeable and waterproof and oil-proof, will not become dirty and black, will not fall off, and the beauty of the joint has many colors, which can be matched with the color of the tile to play a beautifying role.

    The reason why the sewing agent falls off:

    The first reason: improper treatment of tile gaps, caused by local non-coverage.

    In the construction process of the caulk, if the tile gap is not smooth, there is dust and water droplets, which will lead to the fact that the combination of the caulk and the caulk is not firm and causes it to fall off.

    The second reason: caused by improper construction.

    In the construction process, after dealing with the gaps, in the process of playing the beauty joint, the beauty joint agent does not cover the tile gaps completely, and water droplets will enter in daily use, in this case, there will also be peeling, falling off and other situations.

  2. Anonymous users2024-02-11

    Whether the sewing agent can be removed after a long time depends on what sewing agent you use, if it is a one-component one-component sewing agent, it is easy to remove, because its adhesion is not strong; The adhesion of real porcelain glue and self-leveling (Chunlan Dongyu) porcelain joint agent is firm after solidification, and it is more troublesome to remove!

  3. Anonymous users2024-02-10

    I use Baxter two-component at home, very hard, very bright, if you say it is too difficult to remove and redo, but I have been doing it for two and a half years without any problems, but then again, it is easy to remove the redone sewing agent, the quality can be seen in general, indicating that the viscosity is too poor!

  4. Anonymous users2024-02-09

    The ventilation is good for 24 hours, and it rains for three days.

    The traditional caulk is applied to the surface of the caulk, but the new caulk does not need caulk to be the bottom layer, and can be directly added to the tile gap after the tile is bonded. It is suitable for gap filling of more than 2mm, and the construction is more convenient than the ordinary type, and it is an upgraded product of caulk.

    Product Advantages:

    The new material is composed of high-tech new polymers and high-grade pigments, which is a semi-liquid liquid, which is different from white cement, color caulk (dry powder cement material low-grade pigment) is mainly composed of inorganic materials.

    It is made of high-tech new polymer materials, high-grade pigments and special additives (the main materials include epoxy resin, asparagus polyurea resin, MS, etc.).

  5. Anonymous users2024-02-08

    In the construction industry, the beauty of the seam is indispensable tile caulking glue, with it the tile can become more flat, easy to do daily cleaning and care, the landlord asked how long the beauty of the seam can be dry, in fact, according to the analysis of different beauty of the seam, generally 24 hours to dry, dry can not step on the black depends on the quality of the beauty of the seam you use, if it is a single group of water-based blackening probability is relatively large, two-component of the beauty of the seam agent under normal circumstances is no problem, recommended: Chunlan winter rain, Jingcai, Zhuo Gao, Fantoni's brands are good, you can refer to it, Chunlan Winter Rain, Jingcai is about 4 hours dry, 24 hours completely dry, under normal circumstances will not step on the black, and dirty and easy to clean. Do not touch the water when applying the sewing agent, otherwise it will affect the drying effect.

  6. Anonymous users2024-02-07

    1.The sewing agent is a semi-liquid product, which is easy to solidify, and the construction is relatively simple and convenient.

    2.Generally, in the case of good ventilation, it can be dry about 2 hours after construction, and the sewing agent can reach high hardness and gloss after 24 hours, and can be used normally.

    3.However, within 24 hours, it is necessary to pay attention to maintenance and avoid scraping, knocking and other damage to the parts with the sewing agent, otherwise it will destroy the beauty of the sewing agent.

    4.If it is a newly renovated house, it is recommended to move in after 72 hours if you are not in a hurry to live in it.

  7. Anonymous users2024-02-06

    Depending on the temperature, it dries faster when the temperature is high, and dries slower when the temperature is low, generally three to four hours.

  8. Anonymous users2024-02-05

    In the construction industry, the beauty of the seam is indispensable tile caulking glue, with it the tile can become more flat, easy to do daily cleaning and care, the landlord asked how long the beauty of the seam can be dry, in fact, according to the analysis of different beauty of the seam, generally 24 hours to dry, dry can not step on the black depends on the quality of the beauty of the seam you use, if it is a single group of water-based blackening probability is relatively large, two-component of the beauty of the seam agent under normal circumstances is no problem, recommended: Chunlan winter rain, Jingcai, Zhuo Gao, Fantoni's brands are good, you can refer to it, Chunlan Winter Rain, Jingcai is about 4 hours dry, 24 hours completely dry, under normal circumstances will not step on the black, and dirty and easy to clean. Do not touch the water when applying the sewing agent, otherwise it will affect the drying effect.

  9. Anonymous users2024-02-04

    The surface layer can be solidified within 2 hours after the application is completed, and it can be completely dried after 24 hours。The beauty sewing agent is most suitable for gluing at room temperature of 5 -25, and the curing time will be affected by the air temperature

    When the temperature is low: such as the cold winter, the sewing agent is relatively viscous, and it is difficult to glue. The curing time of the sewing agent is also long, with a waiting time of 48 hours to 72 hours, or even longer.

    When the temperature is high: such as spring and autumn, the sewing agent is easy to glue, and the curing time will be relatively shortened, and it is necessary to wait for 24 hours to 48 hours.

    Precautions for beauty sewing.

    1. The best time to do beautiful seams should be when the tiles have just been pasted. Because when the tiles are just pasted, there will be a lot of sand, stones, and dust falling when the ceiling and wall are decorated in the later stage, and they are stuck in the gaps of the tiles, which is difficult to clean. The surface and crevices of the tile are the cleanest just after the tile has been applied.

    2. When constructing beautiful seams, we must pay attention to the surrounding environment. A clean, refreshing and dry environment should be selected for sewing construction, so as not to affect the curing of the sewing agent. Just after the tiles are pasted, wait for the tiles to dry before construction.

    If the tile gaps are very wet, try to find a way to dry them.

  10. Anonymous users2024-02-03

    Summary. Kiss! Hello, a blessing, a warmth, a touch.

    Have a grateful heart. Life is full of touching! Your question has been received, it will take a little time to type, please wait a moment and please do not end the consultation.

    You can also take this time to provide more effective information so that I can better answer for you. Hope mine can solve your problem and sort out the answer for you right away, please wait a moment!

    Kiss! Hello, a blessing, a warmth, a touch. Have a grateful heart.

    Life is full of emotional impulses! Your question has been received, it will take a little time to type, please wait a moment and please do not end the consultation. You can also take this time to provide more effective information so that I can better answer for you.

    I hope mine can solve your problem, and immediately sort out the answer for you, please wait for a while!

    Hello, glad to answer for you. Regret that the sewing agent has expired and can still be used in the second and stuffy years. It cannot be used after two years of expiration.

    The shelf life of the sewing agent is usually about one year, and the use of expired sewing agent will oxidize, and the beaten sewing agent will become thinner, resulting in poor curing effect and even no curing, or later detachment.

    Do you have any other questions? I can go on and on for you to answer 3I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again.

    Wishing you well; Have a good life and all the best! 4.If you are satisfied with my service, please give a thumbs up, and I wish you all the best!

    Peace and joy <>

    Ask about custom messages].

  11. Anonymous users2024-02-02

    As long as it is stored properly, it will not affect the decorative effect, but if the sewing agent has been oxidized or discolored and hardened, it can not be used again, and the sewing agent is best used within the shelf life, and the construction quality is more guaranteed. The shelf life of the sewing agent is generally about one year, and Bibihan should be stored in a cool and dry place at a temperature of about 5-25.

  12. Anonymous users2024-02-01

    No.

    The shelf life of the sewing agent is generally about one year, and it should be stored in a cool and dry place at a temperature of about 5-25.

    As long as it is stored properly, the sewing agent that has expired for half a year can also be used normally, and even as long as the sewing agent does not change color, harden, has no peculiar smell, and does not sag.

    However, factors such as too high or too low temperature, direct sunlight and other factors will shorten the life of the sewing agent. Therefore, it is best to store the sewing agent in a cool and dry place at 5-25 °C.

  13. Anonymous users2024-01-31

    Question 1: How long does it take to dry the sewing agent 24 hours in summer and 48 hours in winter.

    Problem 2: The sewing agent can be dried in a few days Under normal circumstances, the room temperature is 25 hours after the construction is completed, and the surface is completely cured within two hours, and the construction surface can be used normally within 24 hours. In the state of not drying, do not touch the sewing agent with sharp strong acid and alkali to avoid affecting the appearance.

    Question 3: How long does it take for the sewing agent to dry Qingju brand sewing agent is 3 hours for initial drying, 12 hours for curing, and 24 hours for complete curing.

    Question 4: How long does it take for tile grout to dry The grout is divided into 2 categories:

    One-component sewing agents generally dry for a few hours because they are water-based. The two-component one takes 12 hours, and the most is up to 24 hours, and the beauty sewing agent on the market is uneven, and it is recommended to use the crystal color This flat shot is still good.

    Question 5: How long does it take for two-component sewing agent to dry Generally speaking, it is about 24 hours, and the construction and curing time will vary depending on the temperature

    Construction temperature: 10 -35. At room temperature 25 hours surface drying, 24 hours to reach the intensity of use, 1 week after the strength of the strength. If you want to speed up curing, you can use heating equipment to help accelerate curing.

    Question 6: How long does it take for the sewing agent to dry? In general, the surface can be cured in 2 hours and completely dry in 24 hours.

    Hope it helps.

    Question 7: How long can the sewing agent be dry, can you step on the black after drying The sewing agent is generally dried within 24 hours, and whether you can step on the black after drying depends on the quality of the sewing agent used.

    Question 8: How long does it take for tile caulking to dry Our family has just done tile sewing, and it can be dried in about 2-3 hours at the slowest after it is done.

    Hope, thank you! Question 9: How long is the interval between the second time and the first time to make a sewing agent This depends on what you use as a base Generally, use caulk to make a base You need to wait for the caulk to dry when it is dry If you use a full fill king to make a base, you need to wait until it is completely dry before doing it, so that the effect can be the best!!

    Question 10: How to do the sewing agent if it doesn't dry for ten days Poor quality sewing agent.

Related questions
16 answers2024-07-13

Beauty sewing agent. When do I need constant temperature heating? As a sewing artist who has been working in the sewing industry for 5 years, this issue has the most right to speak. From the beginning of the one-component sewing agent to the current two-component sewing agent and epoxy sewing agent, Lingomy sewing has construction experience. >>>More

9 answers2024-07-13

The sewing agent has formaldehyde.

The sewing agent is mainly composed of epoxy resin, curing agent and pigment, which will definitely contain a certain amount of formaldehyde. However, when the regular company produces the sewing agent, the content of formaldehyde and benzene can be controlled within the standard range, and a special test report is issued, which can be used with confidence. There are also some small factories on the market, for the sake of profits, the use of inferior raw materials, resulting in serious excess of formaldehyde. >>>More

14 answers2024-07-13

I think the foaming agent used for door and window caulking is not very good, because the service life of the foaming agent is very short, and the effect of use is not particularly good, and its reinforcement effect will slowly weaken after a long time, and it may loosen.

11 answers2024-07-13

Before using Lougumei grout, the tile joint should be treated with ordinary cement-based grout or high-grade white cement mat, and the new caulk should be pressed out about about the depth from the tile surface with a tool of suitable shape and size; If the caulk has been filled in advance, the caulk in the tile joint should also be cleaned out with a suitable tool to a depth about about the surface of the brick. After the seam at the bottom of the mat is completely dry, use a vacuum cleaner or brush to thoroughly clean the surface of the work, free of dust, oil and other debris.

13 answers2024-07-13

Yes. However, it is necessary to deal with the blackened gap beforehand. >>>More