Can you use beauty joints if the tile joints are already dark?

Yes. However, it is necessary to deal with the blackened gap beforehand.

Treatment steps: 1: Use a thin-nosed spatula to remove the black substance from the gaps in the tiles.

2: After cleaning, use a vacuum cleaner to suck up the dust in the crevices.

Three: Rinse the gap with clean water, and after there is no clear water (it is generally recommended to use 12 hours later), you can use the sewing agent for construction.

The construction method of the sewing agent:

1: Install the sewing agent on a special nozzle. 2: Load the booster applicator. 3: Press the glue gun to knock off the gel about 30 cm in front to avoid uneven mixing. 4: Evenly and vigorously glue.

Precautions: 1: The remaining material of the colloidal after construction should be removed with a rag or shovel before it is completely cured within 24 hours.

2: If the construction process is interrupted for more than 20 minutes, the colloid begins to solidify, and the nozzle needs to be replaced.

3: Before construction, you need to make sure that the base surface is free of impurities, oil, water, dust, etc.

Yes, my family has also lived in it for a year, the seams are dark, it is a relative who recommended me to use the beauty of the sewing agent, the effect is very obvious, their construction staff service is really good, one by one the seams first for me to clean up clean, after doing the same as a new paste brick, you must try it is really good.

Of course, if you can't use it, can you still call it beautiful sewing? I would like to suggest you a beautiful sewing agent, which is beautiful and shiny, just like the name makes the tiles shiny.

Yes, but it is recommended that you use a good product, preferably with two-component all-ceramic glue, the effect will be much better. Not only can it cover the original black color, but it can also resist oil, dirt and water. Van Tony's is better.

What to do if you do the black edge of the tile seam, hello, after the tile seam is done, you can remedy it according to the following methods: 1) Use a knife to remove the black edge stains in the tile seams and the old tile seam, and leave a certain amount of space for the follow-up tile seam. This step can be repeated several times until the black edge stain in the tile gap is removed.

2) Make a small hole of 45 degrees in the plastic head of the tile grout, and let the tile grout squeeze out along the plastic head. Squeeze the tile caulking agent against the tile gap, pay attention to the road, don't waste the tile caulking agent too extravagantly, and don't be too less bi, otherwise you won't be able to fill the caulk. 3) Use the pressure plate to press the tile joint along the brick joint from front to back, remember to press the skin and press it several times, and press it tightly.

4) Use a knife to remove any excess tile grout that has spilled over the edge of the gap, and you're done. I hope my answer is helpful to you, and finally I wish you good health and a happy mood again! <>

The tile seam is not good-looking, and you can operate according to the following steps.

1.The first thing to do is to be prepared for the heat gun and utility knife you need. If you buy a water-based sewing agent, you can wash it with water before curing, and the sooner you clean it, the better.

2.Secondly, use a heat gun to blow the sewing agent softly.

3.Use a sewing knife or a stiff utility knife again to scrape out the sewing agent in the gap.

Use a special knife for sewing or a hard utility knife to dig out the sewing agent completely. Ensure the cleanliness of the gaps during construction and do not hurt the glaze of the tile.

4.Finally, keep the pace of the two cooperating with each other, one is eradicated, and the other is heated, until the beauty sewing glue is finished.

1. Cleaning agent for beauty sewing agent.

If you accidentally drip on the tile during construction, or if you don't clean it, you can use a degummy to clean it up. Spray the adhesive decompose on the cured sewing agent and gently wipe it off.

2. Utility knife and seam cleaning cone.

If you want to clean up the seam that has been dried and cured in the gap, you must first blow the seam soft with a heat gun, and then use a seam knife or a hard utility knife to scrape out the seam in the gap, taking care not to hurt the tiles.

3. Find a professional to deal with it.

If you are worried that you will not be able to clean up the sewing agent cleanly and completely, you can also go directly to the home improvement company, and they will have someone to clean it up, so that you can save the trouble of doing it yourself.

Taking method 2 as an example, the method of removing the beauty seams is as follows:

Step 1: Prepare the heat gun and utility knife you need.

Step 2: Use a heat gun to blow the sewing agent soft.

Step 3: Use a sewing knife or a stiff utility knife to scrape out the sewing agent in the gap.

Step 4: Keep the pace of the two cooperating with each other, one is eradicated, the other is heated, until the beauty glue is finished.

Notes:

The finished sewing agent can be redone, but it will be time-consuming before and after the production process, so when there is a production demand, the color should be selected before construction to avoid unnecessary trouble in the later stage. If rework is required, it must be dealt with in a timely manner, and the longer the curing time, the more difficult it is to clean.

It is generally not recommended to deduct the tile seam, because there is no good way, it is labor-intensive and a waste of time, and it may be more wasteful than the first construction.

It is also easy to damage the corners of the tile, and it is likely that the corners of the tile will be damaged due to sharpness.

The construction company will remind that it is not easy to deduct the tile seam when it is done, and the company will provide a color swatch for the owner to choose carefully.

After the hair dryer blows hot, shovel it off with a utility knife.

Usually after the tiles are paved, the owners will make another layer of beautiful joints, so that the gaps between the tiles can be filled, which can prevent the gaps from hiding stains and improve the decoration of the tiles. Tiles are easy to turn black after a period of use, so how to clean the tiles when they are black? What should I pay attention to in the construction of beautiful seams?

If only the surface is black, you can first moisten the black area, and then use a detergent to wipe it slowly; If the bottom is black, you need to use oxalic acid or a special detergent to remove it; If the above methods are ineffective, it is recommended to ask professional construction personnel to clean up or re-apply.

What should I pay attention to in the construction of beautiful seams?

1. Keep it dry indoors.

When doing beauty sewing, it is necessary to avoid rainy weather and do it in dry and ventilated weather. If it rains, it is recommended to do beauty sewing two or three days after the rain stops. If the indoor environment is humid, it is recommended to use a hot air blower or dryer to evaporate the indoor moisture and reduce the humidity in the air.

2. Pay attention to closing the window.

During construction, doors and windows need to be closed to reduce air convection and prevent the phenomenon of solidification or whitening of the seams in the future. If the humidity in the air is too high, it will be easy to cure if the seams are done, and their surface gloss will be reduced, and they will not look bright and a little blurry.

3. The hollow drum cannot be used as a sewing agent.

Before doing the beauty seam, it is necessary to carefully check whether the tiles are generally qualified, and if there are problems such as hollowing and cracking, they need to be repaired immediately. If the tile has a hollow drum, it is not allowed to do the seam, if the seam is done, for a long time, it will exceed the tolerance range of the seam, which will cause the tile of the hollow drum to fall off.

4. Check after construction.

After the completion of the seam construction, a comprehensive inspection is required, and if there is an improper construction at the beginning, it needs to be dealt with immediately to avoid more troublesome maintenance in the future.

Baking soda and white vinegar can be used, and both baking soda and white vinegar contain a lot of cleansing ingredients that can dissolve dirt. Use a solution of baking soda and white vinegar and rub it with a steel wool ball.

In addition to using baking soda and white vinegar bucket rounds, you can also try using 84 disinfectant. The tile gaps after cleaning with 84 disinfectant will also be as white as new, but the only drawback is that the hollow collapse after use may alkalize the tile gaps, resulting in the tiles falling off or warping after a period of use.

The tile seam is dirty and black and cleaned, as follows:

1. Make tile seams.

Use a blade cleaner or a small blade to clean the blackened tile joints. Then use a glue gun to inject beauty joint agent into the tile gap, and the effect after completion. Not only will such blackened tile gaps be perfect, but it will also become very beautiful and beautiful.

2. Wash with toothpaste.

floor tile gaps, generally made of white cement and putty. You can directly use toothpaste to scrub the position of the crevices and effectively remove the oil stains from the crevices.

3. White cement waterproof wax.

The main material in the tile gap is white cement, and we prepare some white cement and mix it with water and waterproof glue. Then pour the mixed white cement evenly into the gap. Scrape it flat repeatedly with a card and wipe off the excess white cement with a rag.

When the white cement is dry, apply the waterproof wax. Not only does it look like new, but it's also waterproof.

Other methods

1. Clean with wet wipes or rolling rags.

If it is only a local location or only a slight darkening, it should be wiped with wet wipes in time to deal with it. Perhaps it is due to improper operation that has caused the stain to fall in this position, or due to changes in natural factors, which have just begun to darken, you can use wet wipes to scrub directly.

2. Toothpaste removal.

Similarly, if you find that the local part of the seam is black, you need to use toothpaste to remove it in time, apply the toothpaste to the black part of the seam, and gently brush it off with a toothbrush. In the brushing work, it is necessary to carefully observe the change of the position of the seam, if the force is too strong, it may destroy the effect of the seam, or even fail to clean the effect.

Ceramic tile is an indispensable decoration material in the decoration, ceramic tiles and tiles need to be jointed, the beauty of the joint is the upgrade of the grout, the decorative practicality of the beauty of the joint is significantly better than the colorful caulk, but many people will askIs it good to use beauty caulk for tiles??There are also many people who don't know what are the brands of tile grouts? So let's introduce it to you.

First, is it good to use beauty grout for ceramic tiles?

1.After the tile grout is solidified, it will form a smooth and clean surface like porcelain, waterproof, moisture-proof, dirt-resistant, wear-resistant, excellent self-cleaning, easy to clean, and clean with one wipe. Moreover, it is not easy to hide dirt and dirt, and produce bacteria that endanger human health.

2.Tile grouts come in a variety of colors and can be matched with a variety of different styles and colors of tiles to create a multi-style home. It is made of new polymer materials with high-tech content and high-grade pigments, which is different from white cement and caulk, and has superior performance.

3.Tile grout has glossy, rich and natural color, brings better decorative effect, and the decorative performance is much stronger than white cement and color caulk.

4.The current tile beauty grout material is green and environmentally friendly, non-toxic and tasteless, does not contain other toxic substances, and will not cause harm to people.

5.Tile joint agent has a wide range of applications, and the gaps of ceramic tiles, mosaics, stones, wood, glass and other materials can be constructed.

Second, the brand of beauty grout for ceramic tiles

1. Sewing Emperor Sewing Agent: Sewing Emperor Sewing Agent, produced by Betel Home Furnishing, is a new Ming Mo generation ceramic tile sewing commodity. It is suitable for the beautification and repair of tiles, mosaics, stones, doors and windows and other gaps and dark corners.

Sewing Emperor Beauty Sewing Agent, produced by Betel Home Furnishing, is a new generation of ceramic tile sewing products. It is suitable for the beautification and repair of ceramic tiles, mosaics, stones, doors and windows and other gaps and cornered line foundation beams.

2. Mandala sewing agent: Beijing ultraviolet light cloud technology is mainly engaged in all kinds of high-end ceramic tile companions - mandala tile sewing agent, special building materials; other polymers; Other skin chemicals; Sales and development of fire-resistant and fire-resistant materials.

3. Cainiu sewing agent: Cainiu sewing agent is a new, high-tech commodity produced by Beijing Cainiu Science and Technology, which is derived from the American formula, integrating the advantages and integration of similar products in China, highlighting its environmental protection function and the advantages of never fading.

4. Zhengran beauty sewing agent: Zhengran beauty sewing agent is a product of Beijing Jiahe Wanda Technology, which is a scientific and technological innovation modern company committed to continuously improving the home environment and supplying excellent building materials.

When decorating the house, ceramic tiles will appear, but there is a need for hooks between porcelain and ceramic tiles, so what are the brands of ceramic tile and ceramic tile joint, we have also understood it through the introduction.