Is the sewing agent afraid of hot water? How long does it take to press the sewing agent

Beauty sewing agent. When do I need constant temperature heating? As a sewing artist who has been working in the sewing industry for 5 years, this issue has the most right to speak. From the beginning of the one-component sewing agent to the current two-component sewing agent and epoxy sewing agent, Lingomy sewing has construction experience.

Should the sewing agent be heated at a constant temperature? Today, let Ringo sewing to share with you, when the weather temperature is high, the sewing agent does not need to be heated, and generally when the weather is cold in winter, the sewing agent needs to be heated.

The sewing agent is heated at a constant temperature.

1.The sewing agent is made of epoxy resin.

It is made of curing agent, pigment and other materials. Too low a temperature will cause the curing agent to solidify, while heating will dilute the curing agent.

2.During the construction of the sewing machine, the temperature of the construction site is lower than 5 degrees, if the sewing agent is not heated to dilute the curing agent, it is very difficult to make the glue, even if the sewing glue gun is crushed, it is not necessary to make the sewing agent.

3.There are many ways to heat the sewing agent by boiling water, in the past, it was heated with a bucket to boil the water, and after the water boiled, put the sewing agent into hot water and soak it for about 1 minute, and then quickly take out the sewing agent. The sewing agent is scalded in hot water for too long, and in the construction of sewing and gluing, the sewing agent is easy to leak.

Therefore, it is necessary to grasp the time of the hot sewing agent, not too early, nor too late, the sewing agent is taken out early, the sewing agent has not been completely diluted, and it will be quite difficult to sew and glue.

Traditional boiling water heating method.

4.The incubator heating incubator is also a new product that came out last year, and the outer packaging is cloth, and the effect is quite good. 9 sets of sewing agents can be heated at the same time in a box, and the heating time is about 30 minutes.

The heating speed is about the same as that of traditional boiling water, but it is better controlled than traditional boiling water heating, and it can be kept in the incubator all the time, so you don't have to worry about the heating time of the sewing agent being too long, which will cause the sewing agent to leak. The traditional boiling water heating does not control the time of the stamping sewing agent, which will seriously lead to the leakage of the sewing agent.

The temperature of the sewing agent heating box can be set by yourself, and you can set a constant temperature of 3 to 40 degrees. You can feel at ease to play a set of sewing agent, and then put a group of sewing agent into it, which is simple and convenient to operate, so that the beauty sewing construction masters can save a lot of things.

Constant temperature heating box for beauty sewing agent.

5.Some people may say that the sewing agent can be used without heating, and the sewing agent can also be beaten, and it doesn't matter whether the sewing agent is hot or not.

But what Lingome wants to say today is that if the temperature is a few degrees below zero, whether you use an electric glue gun or not, you must use a perm sewing agent. Otherwise, there will be the following two situations:1

If the sewing agent tank bursts, and the glue leaks, if the sewing agent on your electric glue gun is not cleaned in time, then your electric glue gun needs to be replaced. 2.If you do not iron the sewing agent, there will be small particles in the sewing agent after the curing agent solidifies, and this small particle is produced by the curing agent.

As a kind of gap decoration material, the beauty sewing agent is widely used in the gaps of household tiles, and can make the gaps never dirty and black, which is very beautiful and durable, and maintains the beauty of the family while ensuring the health of the family. Although the sewing agent is a very good product, its function will still be tested to a certain extent when used in some dangerous places, such as the bathroom with perennial water and the kitchen with oil stains. The most likely thing that can happen is that you accidentally spill hot water on the ground, and then it flows into the cracks of the tiles, burning the seam and putting it on the road to refill.

In fact, there will be a lot of knowledge in various places where we live, for example, in terms of decoration, when we decorate our own homes, we will make some choices for some furniture or some latex paints in our homes. Because these choices are related to the harmony of our future lives, we must be serious in terms of decoration. So on the Internet, we see that some people say that the sewing agent needs to be heated, and many people are not familiar with such knowledge points, so today we are going to discuss why the sewing agent needs to be heated.

The difference in temperature, but according to the professionals, if it is winter, the sewing agent needs to be heated to a certain extent. However, if the temperature is very high in summer, there is no need for heating, so because it is a curing agent, and it is made of pigments and other materials. Then when the temperature is lower, they will solidify, and the heating will only make these hardeners more diluted.

Then when the sewing is under construction, because the temperature of the construction site is lower than 5 at that time, if the sewing agent is not heated, it will be very difficult to glue. Even when the decoration worker crushes the sewing gun, there is no way to squeeze them out, so it is necessary to heat the sewing agent at this time.

You can choose an electric sewing gun, but if it's summer, the temperature is above 30. At this time, the sewing agent does not need to be heated, because the weather is already high at this time. At this time, the workers are able to squeeze the liquid out of the sewing machine smoothly, so there is no need for heating at this time.

If you want to use the sewing agent without heating, you can also buy some electric glue guns to make the sewing agent. Because these electric applicators automatically heat the sewing agent, it will be more convenient when we are sewing in the sewing.

There is a certain amount of truth, so there is a certain reason why the sewing agent needs to be heated on the Internet, but the heating of the sewing agent is also divided into situations. If you are in a very high environment, then you don't need to heat it at this time. So if you are decorating your house in winter, you need to heat the sewing agent.

Because of the heating of the sewing agent, it can make your operation more convenient and at the same time smoother in the process of decoration.

It may be because after heating, it will be more firmly absorbed, and this still has to be handed over to the decoration master to operate.

Because after heating, the sewing agent can be more firm, and will not fall or fall off, only if it is relatively strong, it will not affect the appearance, and it can become more beautiful.

Because only when the sewing agent is heated will it have better ductility and play a better role.

That's because you get better results and you don't get any error messages.

Because the sewing agent is relatively viscous after heating, it will be particularly easy to construct at this time, and its fluidity will be particularly good, and the gluing will be smoother. The filling of the gap is fuller, and the effect will be particularly good.

The reason why there is such a saying is that there is a curing agent in the sewing agent, and the phenomenon of solidification will occur when the temperature is relatively low, so it is better to heat it.

Because the fluidity of the sewing agent is not strong enough, it needs to be heated, so that it is easier to squeeze it out and apply it to the ground.

In winter, you can wait for a few minutes to press the seam, if you wait a few minutes to press the perfect sewing agent in summer, then you can't press the seam, and the perfect sewing agent must be pressed immediately in the high temperature weather.

In the summer, the construction of beauty sewing must be cooperated by two, one person is responsible for the beauty sewing agent, the other person will press the seam, and the person in front will press how many beauty sewing agents the back person will press. After the sewing agent is punched, it is necessary to press the sewing quickly, and you can't wait and don't need to wait. After a set of sewing agent is finished, the sewing agent is in the curing process, and when you press the seam, you will find that the sewing agent cannot be pressed at all, and the sewing agent has become hard and cannot be pressed.

Whether it is winter or summer, it is necessary to pay attention to the fact that the current sewing agent is two-component, and the composition is composed of epoxy resin, curing agent, pigment, etc. The epoxy resin and the curing agent are mixed evenly, cured by chemical reaction, and the sewing agent will be cured when squeezed into water after extruding the bottle.

The beauty sewing agent is an upgraded product of the grout, and the decorative practicability of the beauty sewing agent is obviously better than that of the color caulk. It solves the problem of unsightly and dirty tile gaps. The traditional caulk is applied to the surface of the caulk, but the new caulk does not need caulk to be the bottom layer, and can be added directly to the tile gap after tile bonding.

It is suitable for gap filling of more than 2mm, and the construction is more convenient than the ordinary type, and it is an upgraded product of caulk.

Now the technology of beauty sewing agent is quite mature. In summer, it is cured in two to three hours, so now to do beautiful sewing, it is generally to press the seam after hitting a seam, don't stay for a long time, usually one person glues, another person presses the seam, if it is a person construction, you have to press the seam after two or three seams. Hope it helps!

Regardless of the temperature geometry of spring, summer, autumn and winter, you can press it with a perfect sewing agent.

If the temperature is high, try to keep it within 10 minutes.

This should be decided according to the change of seasons, the beauty of the sewing construction is generally two people together, a glue and a seam, and the summer surface drying time is relatively fast, two or three hours to dry, so the glue must be pressed within 20 minutes, and the winter must be pressed within 30 minutes.

The joint is a material that fills the gaps in the tiles, and it also has the effect of mildew and dirt, which can avoid the blackening of the tile gaps. The sewing agent is squeezed out along the gap with a special glue gun, but in winter, the temperature is relatively low, and the sewing agent may be harder and not easy to glue, so we can use hot water to soak the sewing agent.

1. Hot water soaking: Prepare a bucket of hot water with a water temperature of about 60 70 and soak the bottle in water for 5 10 minutes. If you feel that the material is still relatively difficult to beat, you can continue to soak for a while.

Be careful not to have too high a temperature and not too long. Otherwise, the material will be too thin, and the construction will cause problems such as collapse.

2. Heating bag heating: heating bag is more convenient. Pack the beautiful sewing material into a bag and let it sit to heat. It can heat multiple groups of sewing agents at one time, and the heating is more uniform.

This is because the sewing agent contains epoxy resin and hardener, both of which are susceptible to temperature. If the temperature is too low, it will become viscous, and eventually the sewing agent cannot be extruded, and it is more laborious to dispense and punch. On the contrary, as the temperature increases, the sewing agent becomes thinner, the material is easier to come out, and it is easier to form.

Therefore, if you want to use the seam in a low temperature environment, you can heat the seam in hot water for about 5 minutes, or you can put the seam in a thermostat and heat it up.

Soak it in warm water, with the glue outlet facing down, and the soaking effect will be better. Note that the sewing agent is very sensitive to temperature, if the temperature is too high, it is easy to cause product reflux or granular impurities, which will affect the use effect. The soaking time should not be too long, and it can be controlled at about 15 minutes.

If the glue still cannot be produced after soaking in warm water, it may be a quality problem of the sewing agent. Be careful not to use expired or poorly adhesive seam products, otherwise they will peel or crack later on, and eventually have to be reworked and redone.