What should I do if the spring rain keeps leaking, and the doors and windows at home are always leak

First of all, we must know what the cause of leakage is, and then repair it from ** leakage.

How to check for leakage in doors and windows.

Check the location of the leak.

Check the location of the drain holes in the window frame slots.

Check the sealing of the outer window frame and window sill.

The window should be made of good elasticity, the thickness of the old carpenter Luban doors and windows is standard, and the special sealing strip matched with the profile can ensure that the glass strip is compacted and seamless, and the sealing strip needs to be a whole, and the interface must be selected in the upper part of the window and connected with glue.

Nowadays, many doors and windows are corner windows, and there are many splicing places, which must be sealed with sealant, if they are not sealed, they will become a hidden danger of leakage.

After the gap between the wall and the window is filled with foaming agent, the gap between the window and the wall should be sealed with waterproof sealant outside, of course, the premise is that the gap is not too large.

1. The window and window sill are not tightly sealed: many of the connections between the window and the window sill are filled with foaming agent, and this filling is necessary to seal the gap between the window and the wall with waterproof sealant, in this process, if there is a loose seal, it will cause water leakage.

2. The device is not standard: there are many corner windows in the window, and there are many places for splicing, these places must be sealed with sealant, if they are not sealed, there is a risk of leakage, and there is also a factor because, in the window device, many people use blasting screws to connect the windows and walls, and the rainwater will soak into the wall along the blasting screws.

3. Non-standard planning: The main reason for the non-standard planning of the window is that there is no drainage hole, especially the sliding window, the rainwater accumulates in the sliding frame groove and cannot be excluded, and it will soak into the house after the water is full.

The above reasons are caused by carelessness during construction, therefore, there is a water leakage, you can contact the installation master at that time to come to the door for installation. If there is a water leak in the rental house, you can contact the landlord for relevant treatment.

Solution: Check the joints between the window and the wall, remove the original aging or broken sealing material, and then treat the base layer clean, flat and straight.

Because of the rain, your doors and windows have leakage problems, then I think you should at least replace the seals for the doors and windows, and even replace the doors and windows!

Just find an agency that specializes in sealing, and handle it for you.

As a veteran of the real estate renovation industry, I will introduce you to some solutions to window leakage and water seepage. Window leakage and water seepage is a common problem encountered by many homeowners, and if not addressed in time, it can lead to damage and loss of the indoor environment.

Here are a few possible workarounds:

Check the seals and glue: Window seals are an important part of preventing rainwater from seeping in. Regularly inspect the sealing strip for wear or age, and replace it in time. In addition, use high-quality sealant to fill the gap between the window frame and the wall, ensuring a complete seal.

Dealing with glass gaps: Glass gaps in windows are also potential for rain and water infiltration**. Clear sealants can be used to fill glass gaps to prevent rainwater from seeping in. Make sure to carefully clean and level the gaps during the construction process to ensure the adhesion of the glue.

Check the drainage system: The drainage system around the windows is very important. Ensure that the drainage pipes are unobstructed and that the water can be discharged smoothly. Clean drains and drains to prevent clogging.

Repair broken window frames: If there are breaks or cracks in the window frames, rainwater can easily seep into the room. When a problem with the window frame is discovered, immediate steps should be taken to repair or replace it to ensure the integrity of the window frame.

Add waterproof membrane and water retaining strips: To increase the waterproof performance of your windows, you can add waterproof Zen key film or install water retaining strips around the windows. These measures can effectively stop rainwater from seeping into the room and improve the tightness of the windows.

Find professional help: If you are unable to solve the problem on your own, or if you are experiencing a complicated window leak, it is advisable to seek the help of a professional renovation company. They have the experience and expertise to accurately diagnose and solve problems.

Please note that the above methods are for reference only and the specific solution may vary depending on the type of window, the material, and the cause of rain and water leakage. It is important to consult with a professional before proceeding with any remediation to ensure that the method you choose is appropriate for your particular situation.

The solutions to window leakage and water seepage are to keep the drain channel unblocked, redo the waterproof layer, and fill the gaps.

1. Keep the drainage groove unblocked.

For the leakage caused by the infarction of the window frame gutter, the problem can be solved by keeping the gutter unobstructed. If there is a problem with the location of the drainage hole, the original hole should be blocked and reopened.

2. Redo the waterproof layer.

The window wall itself leaks, the way to deal with it is to knock open the outer wall, repair it, check whether it is strong after repairing, and remember to lay a waterproof layer.

3. Fill in the gaps.

In the event of a water leakage between the window frame and the wall or window sill, the gap can be resealed. The gap between the outside window frame and the window sill of the wall needs to be cleaned up, and the filler wheel is sealed with weather-resistant glass glue, and sealed with mud and mortar for waterproofing.

Installing windows requires careful attention.

1. The quality of glass, hardware, sealing strips, angle glue and other materials directly determines the performance and quality of doors and windows. The best quality doors and windows have super water tightness, air tightness, wind pressure resistance, etc. Therefore, when selecting windows, we should strictly select qualified windows, and the quality of the purchased window frames, sashes, sealing strips, etc. should be up to standard, and the sealing materials, caulking materials and waterproof materials should have quality certification documents to ensure that they meet the production requirements.

2. The airtightness of the window is also closely related to the installation. The window sill outside the window should be about 20 cm lower than the indoor window sill board, and a downstream slope should be set to make the rainwater drain smoothly. The gap between the outer frame of the metal window and the indoor window sill plate needs to be sealed with weather-resistant and high-elasticity sealant to prevent its leakage.

The position of the lintel and window sill should be left with a drip trough and a slope of running water.

There are many reasons for window leakage, and different treatment methods should be determined according to different reasons.

1. There is a gap between the door frame and the wall

The loose gap between the window and the frame and the wall is one of the common causes of window leakage, and in this case, only the gap needs to be resealed. Clean the original seal and fill it with new glass glue to seal it. In addition, the windows are in direct contact with the outdoor environment, soGlass glueIt is necessary to choose weather resistance.

2. Caused by the aging of the wall

For some old houses, because the wall near the window is aging, the waterproof layer is damaged and the problem of leakage, the solution is to redo the waterproof layer and remove the outer layer of the exterior wallCover the waterproofing layer before repairing

The push-pull chute drain is clogged

If there is no drainage hole in the sliding window or the drainage hole is blocked, it will also cause water to leak. In view of this situation, it is necessary to pay attention to the selection of windows in the early stage and the installation of windowsEnsure that the drainage groove is drained smoothly。You can choose the doors and windows products that are specially designed with a hidden vertical drainage system like the new Haoxuan, which are sealed and drain quickly.

Control the quality of window materials

The poor quality of the window itself, the lack of strength of the glass and door frame, resulting in deformation and cracking, and the deformation of the adhesive strip leading to the failure of the seal, will cause the window to leak. Therefore, it is necessary to pay attention to the quality of the material of the window, disturbing the general quality of the products of big brands such as Xinhaoxuan doors and windows, and its doors and windows products are known as "the performance of the doors and windows is scattered", the product structure is stable, and the sealing and waterproof performance is good.

If it is a heavy rain in the past, there may be water leakage by the windows of some families, which will seriously affect the aesthetics of the window sill and wall in the room, or it may be moldy and peeling, so how to deal with it? We still need to find out the cause and prescribe the right medicine.

1. Causes of window leakage:

1. Loose window: The loosening between the window and the frame causes water leakage, and the window may have a gap between the window and the wall after a long time of use, which is generally caused by the unqualified quality of the window, and the poor quality window is also relatively easy to deform, resulting in the mortar cracking and falling off of the window frame.

2. The installation of windows is not standardized: the outdoor window sill of the window needs to have a gentle slope so that the rainwater can flow out quickly. The plastering layer of the window sill board is not made to slope downstream, or the slope is facing inward, and the window sill board is cracked, which will cause the phenomenon of window leakage.

3. Poor drainage of the window groove drainage hole leads to water accumulation and leakage: you can go home to see the window and window groove of your home, especially the sliding window, under normal circumstances, the window groove has drainage holes, and can not be blocked, otherwise, the window groove may be quickly filled with water, and the water flow may spread to the room. Some windows don't even have drainage holes.

4. The waterproof layer around the window wall may be damaged: it generally appears in the older house, or the window has been removed before, once the waterproof layer is damaged, it can not play the role of waterproofing, and if the rainfall is relatively heavy on a rainy day, then the home may suffer.

2. How to prevent or solve window leakage?

Before installing windows:

1. Strictly control the quality: not only the quality of the window needs to be strictly controlled, but also the window frame and sealing strip must be strictly controlled.

2. To install correctly: the outdoor window sill should be lower than the indoor window sill plate, the height should be 20mm, and the downstream slope should be set, and the window frame should be tightly sealed to prevent water leakage.

In use after installation:

3. Reseal the window gap: If it is due to poor sealing, reseal the place where there is water leakage, it is best to wait until the weather is good, first clean up the dirty things inside, fill in the weather-resistant glass glue for sealing, and if the window is outside, it should be waterproof and sealed with mud and mortar.

4. The window groove should be cleaned frequently: if the window groove is waterlogged, it may be due to not paying attention to the hygiene of the window groove on weekdays, resulting in the blockage of the drainage hole; If there is no drain hole, a happy hole is needed to facilitate drainage.

5. Redo the waterproof layer: The above operations have been done, and in the end it is found that it is still leaking, maybe it is the problem of the waterproof layer, and we need to redo the waterproof layer. The way to do this is to knock on the outer wall to repair and redo the waterproofing layer.

The above is all the content of the causes and treatment methods of window water leakage brought to you, I believe you have a basic understanding of window water leakage after reading this article. It rains heavily outside on rainy days, and light rain by the window does give people a headache, so it is recommended to deal with it in time, so that the wall can not be moldy and peeled, which will affect the beauty of the room and the good living environment of the room.

Window leakage is often encountered in life, once encountered, do not worry too much, find out the 4 reasons for water leakage, decoration less detours.

1. Check the location of the leak first.

If the window itself is leaking, then you can find a window maker to repair it, if the window is not installed properly and leaks, then pay attention.

If there is a leak on it, it is enough to put glass glue on the joints between the outside window and the wall, and the same method is used on both sides.

If there is a leak in the ground, first look at whether the platform outside the window has gone to the slope, if not, brush some waterproof paint, and then use cement to wipe the slope, and then put glass glue on the joint between the window and the slope.

2. Check the position and sealing of the drainage hole of the window frame groove.

If it is not directly facing the window sill, seal the original hole and re-drill the hole.

If there is a gap, knock off the original seal, shovel off, and then buy weather-resistant glass glue for soft sealing, and then seal it with cement mortar, do waterproofing, and then paste tiles, I believe that there will be no leakage after this treatment.

3. Doors and windows need to be cleaned and maintained.

Daily cleaning to keep the surface of the window clean, try to choose soft gauze or cotton silk when scrubbing, so as not to scratch the surface of the door and window. Regular maintenance of windows can prevent them from leaking water and prolong their service life.

4. Daily inspection.

In use, the action should be opened and closed as gently as possible, and when the window is opened, if there is an obstruction, the fault should be eliminated first. High-end doors and windows such as inward-opening and inverted windows, folding doors and windows should be operated strictly according to the instructions. Always inspect the junction of the window frame and the wall.

The general treatment method is to hit glass glue.

Generally speaking, there are several reasons for window leakage: the window is loose and deformed, resulting in the cracking of the mortar layer and causing water leakage; The window sill plate does not leave a good drainage slope, resulting in water leakage;

or the window sill waterproofing is not done well during the decoration, causing water leakage; The drainage hole of the window groove does not have a drainage hole, or the drainage hole is blocked, causing water leakage; Or there is water seepage on the exterior wall of the house.

To solve the leakage of the window, first clean up all the original filling of the window sill, close it with a small amount of expansion glue, close the surface again with plugging spirit, and close all the closures again with sealant, which is almost the same.

First cut a crack in the outer window that is 1 cm wide and 1.5 cm deep, and then clean it and sprinkle some water to soak it thoroughly. Fill it into putty with the plugging king, smooth it and sprinkle some water to prevent cracking after drying. After finishing, apply the waterproof paint two to three more times.