What should I do if the heating is not turned on, but the water runs out?

What should I do if the heating runs out of water?

1. What is the reason for the heating running water?

The pressure water injection work is to debug the heating facilities before heating, and there are three main purposes: first, to inject water into the pipeline to see if there is any leakage; The second is to use the circulating pump to cool the cycle to prepare for heating; Finally, in order to eliminate the gas resistance and impurities that affect the heating effect in the pipeline, the heating effect is guaranteed.

Every year, before heating, there will always be water leakage when the water is pressed. Of course, this is also the purpose of the suppression, and the water leakage is found to be solved in time. And if you delay the leak until the official heating, it will be even more troublesome to solve.

The main reasons for the heating running water are as follows: when the water was first tested, the water leakage was caused by the residents who opened the air release valve and forgot to close it; Radiators in residents' homes.

Most of them are threaded connections.

Due to the long service life, the radiator is corroded and leaked; Insufficient sealing of valves or joints, as well as water leakage caused by pipeline quality problems; Due to thermal expansion and cold contraction.

The reason is that when hot water is injected, those radiators that are not of good quality burst and leak under pressure; When the heat supply is stopped each year, the water in the radiators is drained, and some of the cracks that have been sealed by the sediment are exposed, and leaks occur when the water is refilled.

2. Who should I find to repair the water during the suppression?

According to the personnel of the heating company, according to the ownership of the property, the heating company is responsible for the heat station to the outlet of the heating pipe one meter. The courtyard pipe network one meter away is generally maintained and operated by the unit or property. If there is no unit or property, the owners share the cost of repair and maintenance.

If a water leak occurs during the official heating period, the heat station staff will close the valve into the unit, and the user can repair it. In this way, the heating of other units will not be affected. If this is not possible, a heat station is needed to decompress and drain the water.

If the user is on the 6th floor, the decompression is small, and if it is on the first floor, the pressure must be reduced to almost none, which will affect the heating of other users.

3. What should be paid attention to when heating water injection is suppressed?

So, what should residents pay attention to in order to reduce the problem of water running? The staff of the heat station said that the reasons are varied, on the one hand, when purchasing radiators, we should pay attention to practicality, not too much in the shape, style, color, etc.; On the other hand, after a long time, you should observe the interface, valve, exhaust valve and other places, which are prone to water running after a long time. In addition, sometimes there will be some impurities such as sand and small metal particles in the heating pipes, which accumulate in the pipes for a long time and are easy to cause water leakage.

It is recommended that at the end of the heating season, the water should be drained and removed.

Some residents will keep people at home during the crackdown, but some residents don't care about it. In this regard, the staff of the heating company reminded that after suppressing the water injection, people must be kept at home. If there is a problem during the water test, you should contact the maintenance personnel in time.

On the day of the water test, the owner should pay attention to whether there is any water leakage in the radiator, heating pipe interface and heating valve.

Now in winter, the weather is relatively cold, and has entered the nineteenth several days, so the weather is very cold, if there is no heating, but the heating is running water, then it means that the heating pipe is damaged, or is a broken place, then you need to go to the heating company, find a maintenance master to help you repair, the cost of general maintenance as long as the maintenance cost of the community will generally be relatively low, about 1 to 300, it is also acceptable to us, if the amount of water is very large, Be sure to hurry up and repair, otherwise the home is blistered is not good, my home was because of water leakage, a lot of furniture has been soaked, and now it is very inconvenient to use.

Who installed the heating in your home and is there an agreement? If the heating company installs or the heating company is responsible for repairing it, and your heating is the same as other people's homes, you can claim compensation, but you have to prove that you are not at fault. Because there is still water in the system after the heat is stopped, and the pressure is still very high, whether there is an announcement on the heat to inform the user to check and report for repair in time.

Turn off the heating and drain valves, find the leak, and repair it.

What should I do if the heating is not turned on, but the water runs out? It may be that the heating is frozen and cracked, and find a professional staff to check and repair it.

How can there be no heating in winter? Recently, some users have reported that the heating at home is not hot, and there is no water and no gas out of the gas, so what's going on? Let's find out!

1. What is the matter with the radiator deflating and no water and no gas coming out.

When this happens, it is generally the exhaust hole that is blocked, and the exhaust hole should be effectively dredged immediately. In addition, it takes five to ten minutes for the radiator to discharge water, because there are many radiators, and the models are therefore different, so the time of releasing water is also different, and the radiator must be suspended before it can be discharged.

Second, how to maintain the radiator.

1. Clean the surface of the radiator frequently.

Because the radiator is exposed, the accumulation of dust cannot be prevented, so the user needs to take a clean towel on time to clean it, so as not to accumulate dust and form stains that are difficult to clean. When cleaning the radiator, do not clean it with a very corrosive solution, and do not use hard, sharp objects to bruise the appearance, so as not to damage the appearance of the radiator.

2. The steel radiator should be fully watered for maintenance.

In order to avoid rust on the inner wall of the radiator, the water of the system can not be discharged, which is to ensure that the oxygen content in the heating is reduced, so as to reduce the formation of rust problems and increase the use time of the radiator.

3. Repair the heating system.

If there is a leakage problem with the radiator during use, it is recommended to repair the floor heating when it is not in use. Since the temperature is very hot in summer, radiators are very susceptible to adverse effects, so the joints of the heating system are loose and leaking, so it is necessary to prevent the radiators from being inspected during the heating season.

Summary: The above is the relevant content introduced to you about how the radiator is deflated without water and without gas, and I hope the introduction can help you. I think everyone has understood it after reading it.

When the heating is finished, there is no water in the gas, it should be that the heating valve does not open the water inlet valve to cause no water to enter, and the water inlet valve of the heating valve must be opened before there will be flowing water in the heating.

This proves that the water pressure is underpressurized, and the central heating should have a valve closed or the pipeline blocked, and the self-heating should check the pressure gauge or the valve at the heating furnace to replenish the water in time.

Radiator hydraulic imbalance: hydraulic imbalance This situation mostly occurs in a household and a circulation installation system, if the hot radiator is turned off, the non-hot radiator can be heated up, this phenomenon is called the hydraulic imbalance of the indoor circulation system. Air blockage in the radiator:

Some household radiators are not hot because the radiator has gas accumulation, resulting in air blockage, after the air blockage occurs, the hot water is difficult to circulate, resulting in the radiator does not dissipate heat or heat dissipation slowly.

Check whether the inlet valve is open normally;

Call the heating company to check on the door;

The water pressure was not enough, and the water did not enter the radiator.

That's not enough pressure, the water isn't filled.

Summary. The reason why the radiator should be changed frequently every day and replenished often is because the water in it will be embroidered or scaled deposition after a long time, and the water circulation will be resistant. There are a lot of impurities with the flow of water into the floor heating pipes of each household, between the boiler and the pipe cycle and repeat, plus high temperature, so that the water becomes turbid, impurities accumulate in the low-lying place, so that the pipeline is in a semi-blocked state affects the effect of heating, waste of gas, sometimes impurities will stain the pump to death, so that the pump can not operate normally, or even burn off, cleaning is supposed to be clean, cleaning is like replacing blood for the heating system, making it smoother, the heating effect is higher, so in order to prevent the radiator from malfunctioning, You need to change the water often, hopefully.

<> new heater is short of water every day, what is the matter with adding water every day?

Hello! We'd love to answer for you. If you need to add water so often, it is mainly because when Axun brought it to the beginning of heating Changjia, there was more air in the internal system, so at this time, it would cause the water pressure to drop and it would be necessary to replenish water many times.

This is a normal clearance. <>

<>The reason why the radiator should be changed frequently every day and replenished often is because the water in it will be embroidered or dedeposited with scale after a long time, and the water will disturb the circulation will have resistance. There are a lot of impurities with the flow of water into the floor heating pipes of each household, in the boiler and the pipeline cycle over and over again, coupled with high temperature, so that the water becomes turbid, impurities accumulate in the low-lying place, so that the pipeline is in a semi-blocked state affects the effect of heating, waste of gas, sometimes impurities will stain the water pump, so that the pump can not operate normally, or even burn off, cleaning is supposed to be cleaned, cleaning is like replacing blood for the heating system, so that the dust is more fluent, the heating effect is higher, So in order to prevent the radiator from malfunctioning, you need to change the water frequently, hopefully. <>

1. The radiator valve is closed, so that the radiator cannot be circulated. In this case, the valve can be opened.

2. When the radiator device is reversed, the radiator with a baffle at one end is installed on the upper side, the lower side becomes straight, and the hot water flows out from the upper side, because there is a baffle below, and the water flow cannot be replaced. In this case, the flap can be removed temporarily, and the water can be returned to the water before being put back again.

3. The filter screen at the inlet valve of the radiator is blocked. In this case, you can clean the filter.

Before the arrival of the new heating season, check whether the threaded connections of the exhaust valve, plug and pipe fittings on the radiator (affected by thermal expansion and contraction) are loose and tightened to avoid water leakage after heating. Also, when cleaning the surface of the radiator, use a soft towel or brush, do not use any organic solution, and use daily detergents such as detergents, weak alkaline soapy water, etc.

1. The lack of water in the heating is generally due to the fact that the radiator has been used for a long time, resulting in a large amount of sediment inside, which causes blockage to the return pipe;

2. In this case, the return end cover of the radiator needs to be opened to drain the internal sediment;

3. In addition, it may be because of the problem of the inversion of the radiator device, in this case, the water baffle needs to be removed first, and then installed back to the original position after the water return is normal.

Through the introduction of the above content, I believe you have a certain understanding of what happens when the heating is out of water.

With the drop in temperature, now the north has entered the stage of central heating, but in the process of using heating equipment, you may encounter various problems, such as no water in the heating, so what happens to the lack of water in the heating? What are the correct ways to use radiators? Let's take a look!

1. What's going on with the heating running out of water.

In this case, it is necessary to open the return end cover of the radiator to drain the internal sediment, in addition, it may be because of the problem of the inversion of the radiator device, in this case, the water baffle needs to be removed first, and then installed back in place after the return water is normal.

2. What are the correct ways to use radiators?

1. In the process of using the radiator, the heating valve can not be opened at will, because before the use of the radiator, there are professionals to debug the equipment, adjust the radiator valves to the appropriate position, and the owner shall not open and close the valve at will after debugging, so as not to affect the normal use of the radiator.

2. When using the radiator, the items shall not be stacked around the radiator installation position, and a certain amount of heat dissipation space shall be left at the position where the radiator is installed, and sundries shall not be placed in front of or on the radiator, so as not to affect the heat dissipation effect of the radiator.

3. When using the radiator, the installation position of the radiator shall not be changed at will, because changing the installation position of the radiator may cause water leakage and cause unnecessary trouble, so when installing the radiator, the radiator needs to be installed in a place that is convenient for indoor heating to ensure the balance of the temperature of each indoor space.

Summary: The relevant content of the heating without water is introduced here, only by understanding the installation and use of the radiator, can the real effect of the radiator be brought into play, and the service life of the radiator can be extended. If you want to know more about decoration, you can pay attention to the relevant information of Qeeka Home.

Dear, hello, the reasons for the lack of gas and water in the heating are as follows: 1. The valve may not be opened, which will lead to no gas and no water, at this time we must first hold the valve and make it parallel to the branch pipe. 2. It may be that the equipment is installed in reverse, resulting in no gas and no water, so you must first contact the after-sales personnel to install it and check whether it can be used normally.

3. We also need to consider whether the filter screen is blocked, resulting in no gas and no water, in this case, the filter must be removed and cleaned.