The difference between white oil glass and frosted glass

The differences are as follows: 1. The raw materials are different, white oil glass is sprayed onto the glass with white oil paint, while frosted glass is made of ordinary flat glass.

2. The treatment is different, the white sprayed oil glass is polished after high temperature baking, while the frosted glass is mechanically sandblasted and hand-ground (such as emery.

grinding) or chemical processing (e.g., hydrofluoric acid.

dissolution) and other surface treatments.

into rough and uneven translucent glass.

3. Different uses, white oil glass is generally used for office countertops, which is generally opaque, while frosted glass is generally used in the doors and windows of offices and bathrooms, and the glass of other rooms can also be used.

Whether it's white oil or scrub, it's best if you don't use it as much as possible.

A good tempered glass to get this will only destroy the structure of the glass tempered, and the self-burst rate is much higher than that of tempered glass.

There is a difference between the two lighting. Frosted glass lighting is better

There are three types of frosted glass, one is sandblasted, one is sandblasted, and one is medicated sand. Our common ones are sandblasting and sanding. It is often used in locations such as doors and windows.

White oil glass is made by coating onto the glass, baking it at high temperatures, and then polishing it. It is generally used as an office countertop.

Compared with the two, frosted glass can give people a hazy feeling, but you can still see the opposite side of the glass without strength. White oil glass, on the other hand, is generally opaque. And it is generally done after the relatively thick glass is strengthened or tempered. As a countertop, it looks quite upscale.

Dear, I'm glad to answer for you: the difference between ultra-white oil sand glass and white oil sand glass A: Good morning! <>

The difference is that the oil sand glass is smooth on one side and beaded on the other, which is more transparent than ordinary frosted glass, even if it is wet, it does not see through, and it does not easily leave finger marks. Use strengthened white oil sand glass, which should not be cracked or dismantled. The white oil glass is sand glass, also known as destroying frosted glass.

White oil glass is made by spraying white oil paint onto the glass, baking at high temperature and then polishing. Slim rock is generally used as office countertops. Generally opaque.

The above is my full reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best! Peace and joy!

The differences between oil sands glass and frosted glass are as follows:1. The raw materials used are different, the oil sand glass is sprayed with white oil on the glass, and the frosted glass is made of general flat glass.

2. The way of treatment is different, the oil sand glass is the raw material is baked at high temperature, and then polished. Frosted glass, on the other hand, is treated by mechanical sandblasting, manual grinding, or chemical methods.

3. The use is different, oil sand glass is generally used on the countertop of the desk, which is a opaque material. Frosted glass can be used on the doors and windows of the office or bathroom, and can also be installed in other rooms if needed.